Suspended Si Microstructures Over Controlled Depth Micromachined Cavities for MEMS Based Sensing Devices
Final shape of the silicon microstructures in wet anisotropic etching depends upon the relative etch rates (i.e., anisotropy) of different crystallographic planes. In order to fabricate the structures including curved shape (or sharp/rounded convex corners), dry anisotropic etching is used; because the wet etching exhibits severe undercutting at the sharp convex corners (or the edges not aligned along the 〈110〉 direction). The present research introduce the fabrication method of suspended silicon microstructures such as cantilever beams with sharp convex and concave corners, and with sharp convex and rounded concave corners of required thickness over controlled etch depth cavities. The fabrication process uses silicon direct wafer bonding and wet anisotropic etching in pure and surfactant added tetramethyl ammonium hydroxide (TMAH) water solutions. Surfactants in TMAH are used to reduce the etch rates of non-(100) planes, so that the undercutting at curved shape, edges aligned along non-〈110〉 directions and sharp convex corners can be minimized to a significant low levels. Various kinds of non-ionic surfactants NC-200, Triton-X-100 and polyethylene glycol (PEG) in a very small amount (0.1% by volume) were studied in 25 wt% TMAH solution.
No Reference information available - sign in for access.
No Citation information available - sign in for access.
No Supplementary Data.
No Article Media
Document Type: Research Article
Publication date: February 1, 2009
More about this publication?
- The growing interest and activity in the field of sensor technologies requires a forum for rapid dissemination of important results: Sensor Letters is that forum. Sensor Letters offers scientists, engineers and medical experts timely, peer-reviewed research on sensor science and technology of the highest quality. Sensor Letters publish original rapid communications, full papers and timely state-of-the-art reviews encompassing the fundamental and applied research on sensor science and technology in all fields of science, engineering, and medicine. Highest priority will be given to short communications reporting important new scientific and technological findings.
- Editorial Board
- Information for Authors
- Subscribe to this Title
- Terms & Conditions
- Ingenta Connect is not responsible for the content or availability of external websites