A Study on the Interface Microstructure of Diffusion Bonded AISI410/SU718 Dissimilar Joints
Solid state diffusion bonding (DB) between Inconel 718 and 410 Martensitic stainless steels were done by changing bonding temperature from 900 to 1000 °C in steps of 50 °C with a consistent pressure of 16 MPa and holding time of 60 minutes. Optical microscopy and scanning electron microscopy (SEM) were utilized to inspect the grain growth and the chemical species of the interface structure. The thickness of reaction layer in interfaces was enhanced with growing bonding temperature. Room-temperature properties of the bonded joints were characterized using micro hardness evaluation.
No Reference information available - sign in for access.
No Citation information available - sign in for access.
No Supplementary Data.
No Article Media
Document Type: Research Article
Publication date: March 1, 2018
More about this publication?
- Journal of Advanced Microscopy Research (JAMR) provides a forum for rapid dissemination of important developments in high-resolution microscopy techniques to image, characterize and analyze man-made and natural samples; to study physicochemical phenomena such as abrasion, adhesion, corrosion and friction; to perform micro and nanofabrication, lithography, patterning, micro and nanomanipulation; theory and modeling, as well as their applications in all areas of science, engineering, and medicine.
- Editorial Board
- Information for Authors
- Subscribe to this Title
- Ingenta Connect is not responsible for the content or availability of external websites