Estimation of Contamination of ERS-2 and POSEIDON Satellite Radar Altimetry Close to the Coasts of Australia
It is broadly acknowledged that the precision of satellite-altimeter-measured instantaneous sea surface heights (SSH) is lower in coastal regions than in open oceans, due partly to contamination of the radar return from the coastal sea-surface state and from land topography. This study investigates the behavior of ERS-2 and POSEIDON altimeter waveform data in coastal regions and estimates a boundary around Australia's coasts in which the altimeter range may be poorly estimated by on-satellite tracking software. Over one million 20 Hz ERS-2 (March to April 1999) and POSEIDON (January 1998 to January 1999) radar altimeter waveform data were used over an area extending 350 km offshore Australia. The DS759.2 (5′resolution) ocean depth model and the GSHHS (0.2 km resolution) shoreline model were used together to define the coastal regions. Using the 50% threshold retracking points as the estimates of expected tracking gate, we determined that the sea surface height is contaminated out to maximum distance of between about 8 km and 22 km from the Australian shoreline for ERS-2, depending partly on coastal topography. Using the standard deviation of the mean waveforms as an indication of the general variability of the altimeter returns in the Australian coastal region shows obvious coastal contamination out to about 4 km for both altimeters, and less obvious contamination out to about 8 km for POSEIDON and 10 km for ERS-2. Therefore, ERS-2 and POSEIDON satellite altimeter data should be treated with some caution for distances less than about 22 km from the Australian coast and probably ignored altogether for distances less than 4 km.
No Reference information available - sign in for access.
No Citation information available - sign in for access.
No Supplementary Data.
No Article Media
Document Type: Research Article
Publication date: October 1, 2002