Industrial Lubrication and Tribology

Effect of surface roughness, viscosity-pressure relationship and elastic deformation on lubrication performance of misaligned journal bearings
pp. 337-345(9)
Authors: Sun, Jun; Zhu, Xinlong; Zhang, Liang; Wang, Xianyi; Wang, Chunmei; Wang, Hu; Zhao, Xiaoyong

The tribochemical study of novel phosphorous-nitrogen (P-N) type phosphoramidate additives in water
pp. 346-352(7)
Authors: Yan, Jincan; Bai, Xuefeng; Li, Jing; Ren, Tianhui; Zhao, Yidong

A novel benztriazole derivative for enhancing the anti-oxidation properties of synthetic ester-based oils
pp. 353-359(7)
Authors: Zhao, Gaiqing; Zhao, Qin; Wang, Xiaobo; Liu, Weimin

Effects of lubricant on the mechanical properties of aluminum 6063 alloy after ECAE
pp. 360-364(5)
Authors: Ajiboye, Joseph S.; Adebayo, Saheed A.; Azeez, Temitayo M.

Effect of surface roughness on magneto-hydrodynamic squeeze-film characteristics between a sphere and a porous plane surface
pp. 365-372(8)
Authors: Naduvinamani, Neminath Bhujappa; Rajashekar, Mareppa

Squeeze film characteristics of conical bearings operating with non-Newtonian lubricants ‐ Rabinowitsch fluid model
pp. 373-378(6)
Authors: Hsu, Cheng-Hsing; Lin, Jaw-Ren; Mou, Lian-Jong; Kuo, Chia-Chuan

Evolution of the lubrication regime of a cylindrical journal bearing in the starting phase
pp. 379-386(8)
Authors: Mehala, Kadda; Bendaoud, Nadia; Youcefi, Abdelkader

Investigation on the application of YAG laser texturing technology to the cylinder wall of auto engine
pp. 387-392(6)
Authors: Zhan, Jian; Yang, Mingjiang

Design and fast verification of pocket elliptical journal bearings
pp. 393-401(9)
Author: Stefani, Fabrizio

A study of 2,5-dimercapto-1,3,4-thiadiazole derivatives as multifunctional additives in water-based hydraulic fluid
pp. 402-410(9)
Authors: Wang, Junming; Wang, Jianhua; Li, Chunsheng; Zhao, Gaiqing; Wang, Xiaobo

Static analysis of hydrostatic conical bearings using flow resistance network method
pp. 411-423(13)
Authors: Hsiao, Shun-Te; Kang, Yuan; Jong, Shyh-Ming; Lee, Hsing-Han; Peng, De-Xing; Chang, Yeon-Pun

Dry sliding of composites with PBT matrix and micro glass beads on steel
pp. 424-433(10)
Authors: Georgescu, Constantin; Deleanu, Lorena; Botan, Mihail

The problems of resistance to scuffing of heavily loaded lubricated friction joints with WC/C-coated parts
pp. 434-442(9)
Authors: Michalczewski, Remigiusz; Piekoszewski, Witold; Tuszynski, Waldemar; Szczerek, Marian

Influence of hydroxyl group functionalization and alkyl chain length on physicochemical and antiwear properties of hexafluorophosphate imidazolium ionic liquids
pp. 443-451(9)
Authors: Xia, Yanqiu; Wang, Zhihong; Song, Yanxin

Optimizing wear resistance of ceramic (TiN, WC and TiC) clad layer by gas tungsten arc welding (GTAW)
pp. 452-458(7)
Author: Peng, De-Xing

A three-dimensional fusion prediction model for fractal rough surfaces in the sliding contact process
pp. 459-467(9)
Authors: Lu, Yan; Liu, Zuomin

Effect of silver-organic precursor on friction and wear
pp. 468-472(5)
Authors: Hu, Ningning; Han, Jiguang; Hu, Bo

Friction and wear behavior of Cu–Cr–Zr alloy lubricated with acid rain
pp. 473-480(8)
Authors: Jia, Zhengfeng; Su, Yuchang; Xia, Yanqiu; Shao, Xin; Song, Yanxin; Ni, Junjie

Tribological behaviours of hybrid Zn–Al metal matrix composites produced by a rapid current sintering technique
pp. 481-489(9)
Authors: Karslioglu, Ramazan; Akbulut, Hatem; Uysal, Mehmet; Bagdatli, Guray

Effect of surface roughness and elastic deformation on the performance of a magnetic fluid-based squeeze film in rotating porous annular plates
pp. 490-497(8)
Authors: Shimpi, Mukesh E.; Deheri, Gunamani

The effect of applied load and sliding speed on the tribological properties of Nylon 6 and ultra-high-molecular-weight polyethylene
pp. 498-504(7)
Authors: Unal, Huseyin; Yetgin, Salih Hakan; Findik, Fehim

A closed-form solution in piezo-viscous squeeze films between a long cylinder and an infinite plate
pp. 505-508(4)
Authors: Lin, Jaw-Ren; Lu, Rong-Fang