INTER-NOISE and NOISE-CON Congress and Conference Proceedings

Pilots' endeavor for aircraft noise abatement
pp. 1388-1394(7)
Author: Mitsuhashi, H.

Managing noise emission impacts of airport traffic
pp. 1395-1399(5)
Authors: El-Fadel, M.; Chahine, M.; Baaj, M.; Mezher, T.

A noise study on the new Lisbon airport
pp. 1400-1404(5)
Authors: Palma, M.J.; Bento Coelho, J.L.; Almeida, A.M.

Updated lateral attenuation in FFA's integrated noise model
pp. 1405-1412(8)
Authors: Fleming, G.G.; Burstein, J.; Rapoza, A.S.; Senzig, D.A.; Gulding, J.M.; Connor, T.L.

Architectural acoustic for theme parks
pp. 1413-1418(6)
Author: Pelton, H.

Acoustic strategies of Barcelona. Sound culture for the 2004
pp. 1419-1424(6)
Author: Daumal iDomenech, F.

Noise from amusement activities: An environmental impact study
pp. 1425-1430(6)
Authors: Cocchi, A.; Semprini, G.

Effects of noise from military jets on hikers in a recreation area
pp. 1431-1436(6)
Authors: Krog, N.H.; Aasvang, G.M.; Osmundsen, E.; Engdahl, B.

Rehabilitation of the acoustic environment of the city of Rhodes
pp. 1437-1446(10)
Authors: Frantzeskakis, J.; Simandonis, J.; Vogiatzis, C.

Effects of tourism in the formation of the acoustic environment of touristic cities in south Europe
pp. 1447-1455(9)
Authors: Psychas, K.; Honianaki, F.

New acoustic map of Madrid
pp. 1456-1459(4)
Authors: Santiago, J.S.; Pons, J.

Assessment of conflict plans on the basis of noise mapping in Germany
pp. 1460-1465(6)
Author: Irmer, V.K.P.

URBIS: Instrument for local environmental survey
pp. 1466-1471(6)
Author: Borst, H.

Using a GIS tool to plan the acoustic urban environment
pp. 1472-1477(6)
Authors: Gomes De Olivieira, M.; Bauzer Medeiros, E.; Davies Jr., C.

Noise maps: Methodology, criteria and current situation; Madrid noise map
pp. 1478-1483(6)
Authors: Recuero Lopez, M.; Sancho, J.; Minguez, A.

A spatial noise distribution map
pp. 1484-1488(5)
Author: Nii, Y.

A novel low-cost approach to noise mapping
pp. 1489-1493(5)
Authors: Cabanellas, S.; Mosconi, P.; Pasch, V.; Yanitelli, M.; Miyara, F.; Puigdomenech, J.; Rall, J.; Vazquez, J.

Noise mapping and GIS: Optimising quality, accuracy and efficiency of noise studies
pp. 1494-1499(6)
Authors: De Kluijver, H.; Stoter, J.

Expeditous noise mapping at a municipal level
pp. 1500-1505(6)
Authors: Carvalho, A.; Rodrigues, R.

Use of geographic information systems in noise abatement strategies
pp. 1506-1511(6)
Authors: Habermehl, K.; Ohse, L.

The GIS chaos (design and planning of the noise environment)
pp. 1512-1518(7)
Authors: Balay, O.; Arlaud, B.

Road traffic noise mapping on an European scale
pp. 1519-1524(6)
Authors: Roovers, C.; Van Blokland, G.; Psychas, K.

Noise mapping in Greece and the psychosocial parameters of Mediterranean countries
pp. 1525-1532(8)
Author: Vogiatzis, C.

Noise mapping of road traffic noise in Portugal
pp. 1533-1536(4)
Authors: Bento Coelho, J.L.; Mateus, J.R.; Palma, M.J.; Almeida, A.M.; Patricio, C.

Lisbon noise map
pp. 1537-1540(4)
Authors: Bento Coelho, J.L.; Palma, M.J.

LKZ-method: A method to calculate numbers of noise effected citizens in urban areas
pp. 1541-1545(5)
Author: Popp, C.

Urban traffic noise measurement optimization
pp. 1546-1552(7)
Authors: Reig, A.; Gaja, E.; Manglano, J-L.; Sancho, S.

Diapason: Efficient help tool in the decision process for local authorities
pp. 1553-1559(7)
Authors: Vaucher De La Croix, D.; Aujard, C.; Laurent, O.

A comprehensive study of hot pressing noise in an Italian subalpine scenery: A new policy for decision makers
pp. 1560-1564(5)
Authors: Bertellino, F.; Roletti, S.; Sartore, D.; Mana, F.

Environmental noise reduction of large industrial plants
pp. 1565-1568(4)
Authors: Dombi, I.; Bite, M.

The countermeasure for the noise and vibration of combustion turbine exhaust gas duct
pp. 1569-1575(7)
Authors: Bae, J.; Kim, W.; Chung, K.

Uncertainty in sound power determination and implications for power plant acoustics
pp. 1576-1585(10)
Authors: Peppin, R.J.; Putnam, R.A.

Noise control engineering by sound-structure interaction analysis
pp. 1586-1594(9)
Authors: Hioki, T.; Isobe, H.

Predicting interior factory noise with ray-tracing modeling. An example of a hardening plant
pp. 1595-1599(5)
Authors: Johnsson, R.; Tingvall, B.; Agren, A.

Acoustical modelling of industrial facilities - Outdoor plant noise control design and construction
pp. 1600-1604(5)
Author: Probst, W.

A parametric study of the sensitivity of combustion turbine inlet silencer insertion loss to the flow resistivity of the absorptive elements
pp. 1605-1611(7)
Author: Putman, R.A.

Port and maritime plant noise: Chararacterization and normalization
pp. 1612-1618(7)
Authors: Rossi, F.; Buratti, C.

A case study of the attenuation of waste heat boiler low frequency resonance
pp. 1619-1624(6)
Author: Hetzel, R.

Low freqeuncy noise radiation from a coal washery screen
pp. 1625-1629(5)
Author: Sheperd, I.

Combustion turbine exhaust systems - Low frequency noise reduction
pp. 1630-1636(7)
Author: Kudernatsch, G.

Measurement method for the low frequency acoustical behavior inside the exhaust system of a combustion turbine
pp. 1637-1642(6)
Authors: Scholz, U.; Bauver, W.P.

About the experience of low-rotated piston compressor units vibration reduction
pp. 1643-1649(7)
Authors: Ogarkov, A.A.; Vassiliev, A.V.; Voltchonkov, V.

Study of Vitoria-Gasteiz by categorizing characteristics roadway
pp. 1650-1655(6)
Authors: Barrigon, J.M.; Gomez Escobar, V.; Gutierrez Marcos, P.D.; Mendez Sierra, J.A.; Ruiz De Azua, J.

An indicator for road traffic noise: Monitoring and prediction model
pp. 1656-1662(7)
Authors: Dekoninck, L.; Botteldooren, D.; Vindevogel, G.; Geens, R.

The potentials of new technology in integrated urban noise management systems
pp. 1663-1670(8)
Authors: Manvell, D.; Larsen, P.; Hartog Van Banda, E.; Henning, P.J.; Winberg, L.

Presentation of environmental noise
pp. 1671-1675(5)
Authors: Marth, E.; Gratt, W.; Kath, D.

Traffic noise and human living environment
pp. 1676-1681(6)
Authors: Liu, Z.; Ding, H.; Hao, L.

Descriptive analysis of the temporary evolution of the urban noise
pp. 1682-1689(8)
Authors: Sanchez, J.I.; Gonzalez, J.; Machimbarrena, M.; Valsero, M.C.

Noise prevention guideline for open-air events
pp. 1690-1695(6)
Author: Lechner, C.

A fuzzy logic approach for urban traffic monitoring using noise measurements
pp. 1696-1701(6)
Authors: Gonzalez-Rojo, S.; Lopes-Pereira, A.; Slama, J.; Mora-Camino, F.

Teh voices of the sustainable city
pp. 1702-1705(4)
Author: Daumal i Domenech, F.

Simplified characterisation of noise exposure to traffic noise in urban areas
pp. 1706-1711(6)
Author: Arras, C.

Environmental noise around Rotterdam
pp. 1712-1717(6)
Author: Witte, R.

Noise study of railroad traffic in the city of Girona
pp. 1718-1724(7)
Author: Arnau, J.

Noise pollution control, noise limit register
pp. 1725-1729(5)
Authors: Puig, O.; Majo, M.

Factory noise in urban and industrial areas
pp. 1730-1735(6)
Authors: Romeu, J.; Jimenez, S.; Saluena, X.; Capdevila, R.

Acoustical optimal design of (un)loading facilities of shopping centres near residences
pp. 1736-1742(7)
Authors: Granneman, J.H.; Oostdijk, J.P.J.

Noise observatory information service
pp. 1743-1748(6)
Authors: Buratti, C.; Cotana, F.; Simoncini, C.; Caracciolo, R.; Curcuruto, S.

Analysis and synthesis of urban noise environments
pp. 1749-1754(6)
Author: Altabella, J.

Study of effectiveness of ambulance vehicle's siren sound as warning device for its duty run
pp. 1755-1761(7)
Author: Baba, H.

Noise investigation in the Rottendam area
pp. 1762-1769(8)
Authors: Maat, R.; Wolfert, H.

Using an equivalent source descriptor to characterize structure-borne sound sources
pp. 1770-1775(6)
Authors: Chatel, G.; Loyau, T.

Characterization of small circulation pumps as sources of vibroacoustic energy
pp. 1776-1780(5)
Authors: Trdak, K.; Badie-Cassagnet, A.; Pavic, G.

Inverse force synthesis state of the art and future research
pp. 1781-1789(9)
Author: Blau, M.

Multi-point source characterisation applied to a diesel rigidly mounted on a raft
pp. 1790-1795(6)
Authors: Termeer, M.; De Jong, C.

Noise path identification using power flow analysis
pp. 1796-1801(6)
Author: Lee, S-K.

Indirect measurement of fluctuating pressure load
pp. 1802-1806(5)
Authors: Park, J-B.; Kim, Y-H.

Vibroacoustic characterization of refrigerating compressors as a function of operating conditions
pp. 1807-1812(6)
Authors: Darpas, M.; Ricol, L.

Characterizing of acoustic radiation of hermetic reciprocating compressor using vibration measurements
pp. 1813-1818(6)
Author: Gavric, L.

The characterization of vibration sources and measurement of forces using multiple operating conditions and matrix decompostion methods
pp. 1819-1826(8)
Author: Bernhard, R.

Investigations of Corona-induced vibration on high voltage conductors in laboratory conditions
pp. 1827-1832(6)
Authors: Wszolek, T.; Tadeusiewicz, R.; Wszolek, W.

Characterisation of structure-borne sound sources: Active components and assembled systems
pp. 1833-1840(8)
Authors: Mondot, J.M.; Moorhouse, A.

Noise and vibration analysis of machine tools using inverse methods
pp. 1841-1846(6)
Authors: Wagstaff, P.; Henrio, J-C.; Did, R.; Chassaignon, C.

The 'Logic of Level' continued, what about multi-variable data processing
pp. 1847-1850(4)
Author: Maurin, M.

A proposal on a means to identify the natural frequency of railway and highway structures
pp. 1851-1857(7)
Authors: Sho, K.; Kitamura, Y.; Yamamoto, K.

Adaptive detector for noise sources automatic recognition
pp. 1858-1863(6)
Authors: Dufournet, D.; Jouenne, P.

FFT vs Vold-Kalman based order analysis of a gearshift event
pp. 1864-1868(5)
Authors: Gade, S.; Herlufsen, H.; Konstantin-Hansen, H.; Vold, H.

A proposed new series of international standards for determining sound power levels of machinery
pp. 1869-1874(6)
Authors: Higginson, R.; Payne, R.

New-generation equipment together with metrological procedures for measurement of parameters of mechanical vibration emitted to the environment by vehicles
pp. 1875-1880(6)
Authors: Lipowczan, A.; Kompala, J.; Bartmanski, C.; Kobylecki, A.; Kubik, I.

Relation between close carved surface and measuring points of sound power levels for electric cleaners using sound intensity method
pp. 1881-1889(9)
Authors: Nagata, S.; Furihata, K.; Yanagisawa, T.

Modal analysis of structures using acoustical excitation
pp. 1890-1894(5)
Authors: Lafleur, F.; Thomas, M.; Laville, F.

Development of multi-function time domain contribution analyzer and its basic performance
pp. 1895-1900(6)
Authors: Sekiguchi, O.; Yakano, Y.; Mae, H.; Aikawa, Y.

A framework for measurement methods for railway noise
pp. 1901-1906(6)
Authors: Dittrich, M.; Janssens, M.

Accuracy considerations on the meteorological correction for a normalized sound power level
pp. 1907-1912(6)
Author: Hubner, G.

Noise transmission and nonlinear vibration of curved plates
pp. 1913-1919(7)
Authors: Poon, W.Y.; Ng, C.F.

Nonlinear nondestructive evaluation technique in solid material
pp. 1920-1924(5)
Authors: Jung, K.I.; Yoon, S.W.

Ground effects upon sound pressure levels on a board for wind turbine noise measurements
pp. 1925-1931(7)
Author: Nii, Y.

New wind screen developed for unattended low frequency noise measurement
pp. 1932-1937(6)
Authors: Fukushima, K.; Ochiai, H.; Makino, K.; Yokota, A.; Yamada, I.; Tsukioka, H.

Sound-based method of measurement for thickness of film
pp. 1938-1948(11)
Authors: Ichimiya, R.; Sakamoto, S.; Tanaki, Y.

DSP application in the vehicle noise meter
pp. 1949-1954(6)
Authors: Podgorski, A.; Barwicz, W.; Mosakowski, J.

Audibel-development of a world class production sound test process
pp. 1955-1961(7)
Authors: Sutherland, M.; Gerold, M.; Copley, D.

Design of a sound level meter with GSM interface
pp. 1962-1965(4)
Authors: Lopez, J.M.; Ruiz, M.; Recuero, M.; Arcas, G.

A new surround sound recording system developed by NRC
pp. 1966-1971(6)
Authors: Wong, G.S.K.; Wu, L.; Leung, K.

Hand-arm vibration measurements by laser vibrometry and capacitive sensor matrices
pp. 1972-1977(6)
Authors: Miccoli, G.; Deboli, R.; Di Giulo, G.; Mariani, J.; Paone, N.; Rossi, G.

Novel flow resistance measurement device using choked micro-orifices
pp. 1978-1982(5)
Author: Patrick, W.

Development of a loud speaker type reference sound source
pp. 1983-1989(7)
Authors: Takazawa, A.; Ohashi, M.; Suzuki, H.; Ono, T.; Tachibana, H.

Development of a measuring instrument for road surface absorption coefficients
pp. 1990-1994(5)
Authors: Mikami, K.; Suzuki, H.; Ohkoshi, M.

Magnetic resonance imaging of elastic wave fields in condensed matter
pp. 1995-2001(7)
Authors: Lewa, C.J.; Franconi, J.M.; Ruth, M.; De Certaines, J.D.

Using 'real' aircraft noise information to assist the noise sensitive individual
pp. 2002-2007(6)
Author: Southgate, D.

How can we be smarter in aircraft noise quantification and management?
pp. 2008-2013(6)
Author: Adams, K.