The Post Annealing to Control the Number of Layers of 2D MoS2 and SnS2
We have demonstrated that post annealing could control the layer thickness of 2D MoS2 and SnS2 films transferred on a SiO2/Si substrate by varying the annealing temperature and time. Atomic force microscopy and Raman spectroscopy characterizations revealed that higher annealing temperature and longer treatment time led to thinner films, lower residues and fewer impurities on the surface of 2D materials. In addition, a higher possibility to attain few-layers on both 2D films was achieved using post annealing. The multiple layers of pristine films having the thickness over 15 nm were reduced down to bi-layers after annealing. We observed that the moderate annealing temperature of 450 °C on led to effective layer-thinning compared to the films annealed at 340 °C. The post annealing at 450 °C produced very smooth few-layers (≤4 nm thickness, >1 μm size) of 2D MoS2 and SnS2. However, the 2D films decomposed or disappeared at temperature greater than 650 °C. In addition, process time also affected the number of layers and the sweet spot turned out to be 2 to 3 hours in our experiment.
Document Type: Research Article
Affiliations: Division of Materials Science and Engineering, Hanyang University, Seoul 04763, Korea
Publication date: November 1, 2016
More about this publication?
- Journal for Nanoscience and Nanotechnology (JNN) is an international and multidisciplinary peer-reviewed journal with a wide-ranging coverage, consolidating research activities in all areas of nanoscience and nanotechnology into a single and unique reference source. JNN is the first cross-disciplinary journal to publish original full research articles, rapid communications of important new scientific and technological findings, timely state-of-the-art reviews with author's photo and short biography, and current research news encompassing the fundamental and applied research in all disciplines of science, engineering and medicine.
- Editorial Board
- Information for Authors
- Subscribe to this Title
- Terms & Conditions
- Ingenta Connect is not responsible for the content or availability of external websites
- Access Key
- Free content
- Partial Free content
- New content
- Open access content
- Partial Open access content
- Subscribed content
- Partial Subscribed content
- Free trial content