Advanced Science Letters

Numerical Calculation and Analysis of Dynamic Pressure Effect for Heavy Hydrostatic Bearing Disk with Multiple Oil Pads
pp. 2561-2565(5)
Authors: Shao, Junpeng; Dai, Chunxi; Xu, Xiaoqiu; Wang, Yunfei; Zhang, Yanqin; Yin, Chao

Thermo-Mechanical Coupling Statics Analysis and Transient Dynamics Analysis for Diesel Engine Piston
pp. 2566-2572(7)
Authors: Wang, Yanxia; Gao, Hui

The Fracture Analysis of Instop Gasket Using FEM Simulations
pp. 2573-2577(5)
Authors: Ma, Xinwu; Wang, Fang

Air-Conditioning Numerical Calculation for Coach with 4 Sleepers Compartment
pp. 2578-2582(5)
Authors: Wang, Dongping; Zhao, Qiang; Cao, Yanan; Zhao, Wenzhong

Research on Deformation Limit State of Reinforced Concrete Shear-Walls
pp. 2583-2589(7)
Authors: Han, Xiaolei; Chen, Xuewei; Sun, Siwei

Simulation of the Subsiding Process of an Iron Mined Area Using the Discontinuous Deformation Analysis Method
pp. 2590-2594(5)
Authors: Zhang, Xiuli; Jiao, Yuyong; Li, Xiaochun; Wang, Haibin

Rigid-Flexible Coupled Dynamics Modeling and Analysis for a Novel High-Speed Spatial Parallel Robot
pp. 2595-2599(5)
Authors: Chen, Xiulong; Deng, Yu; Jia, Shuaishuai

Stress Analysis on Steel Anchor Block of External Prestressing Concrete Bridges
pp. 2600-2604(5)
Authors: Jiang, Haibo; He, Aide; Huang, Feixin; Yang, Lingming; Zou, Linbin

Approach of Stability of Single-Layer Reticulated Domes with Initial Curvature to Members
pp. 2605-2612(8)
Authors: Fan, Feng; Yan, Jiachuan; Cao, Zhenggang

Finite Element Simulation and Quality Control of Hydropiercing Process
pp. 2613-2617(5)
Authors: Li, Shuhui; Wu, Zhigang; Zhang, Weigang

Effects of Rigid Mandrel and Lubrication on the Process of Elbow Parts by Cold Push-Bending
pp. 2618-2622(5)
Authors: Guo, Xunzhong; Tao, Jie; Yuan, Zheng

Performance of 100 MPa High Strength Concrete
pp. 2623-2630(8)
Authors: Li, Lijuan; Xie, Weifeng

Stress and Strain Concentrations for the Filleted Shafts in Tension
pp. 2631-2636(6)
Authors: Yang, Zheng; Hou, Jian; Liu, Quanliang; Cho, Chongdu

Seismic Performance of a Complex High-Rise Mixed Structure with Dampers: Experiments
pp. 2637-2642(6)
Authors: Fengming, Ren; Yun, Zhou; Xuesong, Deng

Estimation Models for Robot-Assisted Needle Insertion
pp. 2643-2648(6)
Authors: Gao, Dedong; Zheng, Haojun; Gao, Yiping

Structure Parameter Analysis of Dynamical Vibration Absorption Lathe Tool with Large Length to Diameter Ratio
pp. 2649-2653(5)
Authors: Qin, Bai; Zhang, Bo; Ni, Yan; Han, Guihua; Yu, Xiaodong; Zhang, Yanqin

Study on Planning for the Indoor-Earthquake-Shelter in City and Town
pp. 2654-2665(12)
Authors: Li, Haiwang; Zhao, Hongsheng; Zhao, Yuanjing; Shu, Xuefeng

Finite Element Analysis of Contact Between Teeth of Self-Healing Composite Gears
pp. 2666-2669(4)
Authors: Zhang, Li; Bu, Xiaoyuan

A CAD/CAM System for 5-Axis CNC Cutting of Multi-Pipe Intersecting Curves with Grooves
pp. 2670-2674(5)
Authors: Zhu, Hu; Fu, Jianhui; Kang, Jaegwan

Study on the Influence Rules of Mesh Parameters on the RCS Calculation
pp. 2675-2680(6)
Authors: Hu, Bifu; Xi, Ping; Guo, Changhong

Influence of Mold Temperature on Melt Filling Process of a Thin Plate Part with Microstructures in Injection Molding
pp. 2681-2685(5)
Authors: Liu, Jitao; Zhao, Guoqun; Guan, Yanjin

Comparison Study of High-Strength Concrete Confined by Normal- and High-Strength Lateral Ties
pp. 2686-2691(6)
Authors: Shi, Qingxuan; Tian, Yuan; Wang, Nan; Hou, Wei

CFD Investigation of Gas Distributor on Flow Maldistribution in the Transfer Line Exchanger (TLE)
pp. 2692-2696(5)
Authors: Yuanhua, Wang; Mingya, Chen; Hong, Xu; Yonghong, Shi; Zhiyuan, Wang

Four-Axis Rapid Prototyping Applied to Lost Foam
pp. 2697-2702(6)
Authors: Lin, Kao-Hui; Hu, Ya-Hui

Smooth Blasting Hole Spacing and Smooth Surface Layer Depth Optimization
pp. 2703-2707(5)
Authors: Feng, Xiaomei; Zhuang, Jinzhao; Ju, Jinsan; Jiang, Xiugen; Yuan, Jun

A Real-Time 3D Collision Detection Encryption Algorithm Based on Improved RC5
pp. 2708-2712(5)
Authors: Liu, Lizhao; Hu, Xiaojing; Zhang, Tianhua; Zhu, Shunzhi; Li, Maoqing

Simulation of Pre-Stressing Construction of Suspen-Dome Considering Sliding Friction Based Large Curvature Assumption
pp. 2713-2718(6)
Authors: Liu, Hongbo; Chen, Zhihua; Wang, Xiaodun

Axial Strengths of Concrete Stub Columns Filled with Demolished Concrete Segments/Lumps
pp. 2719-2726(8)
Authors: Wu, Bo; Zhao, Xinyu; Liu, Wei; Liu, Qiongxiang; Xu, Zhe

Computational Morphogenesis Method for Freeform Structures Generated by Translating B-Spline Curves
pp. 2727-2732(6)
Authors: Li, Xin; Wu, Yue; Cao, Zhenggang

A Study on Bus Interior Noise Based on a Finite-Element Pre-Processing Boundary Element Algorithm
pp. 2733-2737(5)
Authors: Wang, Yansong; Zhou, Jianpeng; Chen, Hao; Li, Yan

Research on Lubrication Performance of Super Heavy Constant Flow Hydrostatic Thrust Bearing
pp. 2738-2741(4)
Authors: Yu, Xiaodong; Meng, Xiuli; Jiang, Hui; Lou, Xiaozhong; Xiang, Hongjun; Wang, Junfeng; Liu, Tonghai; Yang, Changqing; Sun, Xianzhu; Ji, Weidong; Chen, Dongliang

Exchange Traded Fund Day-Trade Investment Strategy Formulation Based on Knowledge Discovery
pp. 2742-2746(5)
Authors: Huang, Chiung-Fen; Chen, An-Pin

Analysis of Rock Comprehensive Test Bed with Double Disc Cutters
pp. 2747-2751(5)
Authors: Wang, He; Wu, Yuhou; Sun, Hong; Zhao, Dehong; Zhou, Peng; Wang, Tengyue; Zhao, Kaijun

Failure Analysis of Woven Composite Joint Under Bending Load
pp. 2752-2758(7)
Authors: Zhao, Libin; Zhang, Xiaoxiao; Zhang, Jianyu; Huang, Hai; Liang, Xianzhu

Study on Load Distribution Calculating Method of Slewing Bearing with the Link Elements
pp. 2759-2763(5)
Authors: Liu, Hongbin; Li, Jishun; Xue, Yujun; Ma, Wei

The Profile Design and Multi-Axis NC Machining of Cylindrical Cam with Boat-Shape Follower
pp. 2764-2769(6)
Authors: Lee, Jeng-Nan; Chen, Hung-Shyong; Kung, Huang-Kuang

Degenerated Shell Element Analysis of Square Rail Drawing of Sheet Metal
pp. 2770-2775(6)
Author: Chen, Tsung-Chia

Analysis of Fatigue Life of Dual-Phase Steel Considering the Sheet Stamping Process
pp. 2776-2781(6)
Authors: Meng, Jin; Zhu, Ping; Hu, Zhigang

Analysis of Dynamic Characteristics for a Dual-Disk Rotor System with Single Rub-Impact
pp. 2782-2789(8)
Authors: Ma, Hui; Tai, Xingyu; Sun, Jian; Wen, Bangchun

Determination of Radio-Frequency Identification Sensor Locations for an Adapted Air-Conditioning System in a Conference Room
pp. 2790-2797(8)
Authors: Lee, Da-Sheng; Yang, An-Shik; Chen, Ping-Hei; Liu, Chin-Lung; Lin, Ching-Po; Tseng, Li-Yu

Finite Element Analysis of New Inner Three-Ring Reducer Based on ANSY Workbench
pp. 2798-2801(4)
Authors: Ren, Jiajun; Li, Xiuhong; Liu, Hui

Vibro-Acoustic Response of a Thermally Stressed Reinforced Conical Shell
pp. 2802-2806(5)
Authors: Xiongwei, Yang; Cheng, Wang; Yueming, Li; Guirong, Yan

CFD Analysis for Merdeka 2 Solar Vehicle
pp. 2807-2811(5)
Authors: Taha, Zahari; Passarella, Rossi; Sugiyono, .; Rahim, Nasrudin Abd; Sah, Jamali Md; Ahmad-Yazid, Aznijar

Numerical Simulation for Temperature Changes of 35CrMnSi/T3 Dissimilar Metals Joint in Radial Friction Welding
pp. 2812-2816(5)
Authors: Luo, Jian; Zhao, Guoji; Wang, Xiaoming; Sun, Yu; Xu, Xiaoling

Computational Fluid Dynamics Analysis of an Aerostatic Journal Bearing with Slot-Entry Restrictors
pp. 2817-2821(5)
Authors: Liang, Yingchun; Liu, Jingshi; Sun, Yazhou; Lu, Lihua; Tong, Zhen

A Study on PC/104 Embedded Rotor Automatic Balancing System Based on Iterative Learning Control
pp. 2822-2827(6)
Authors: Cao, Xi; Yuan, Hongfang; Wang, Huaqing; Chen, Peng

Feedback Decoupling Technology of Fuzzy Configuration Based on Generalized Mapping for Complex Equipment
pp. 2828-2834(7)
Authors: Zhang, Shu-You; Ren, Bin; Gao, Zhan

Thermal Fracture Toughness of a Bi-Material Layer
pp. 2835-2838(4)
Authors: Her, Shiuh-Chuan; Lin, Chin-Hsien

Virtual CNC Cylindrical Grinding Machine Tool Based on Web
pp. 2839-2844(6)
Authors: Guan, Peng; Yu, Tianbiao; Wang, Wanshan

The Modified Dynamic Relaxation Method for the Form-Finding of Membrane Structures
pp. 2845-2853(9)
Authors: Ye, Jihong; Feng, Ruoqiang; Zhou, Shulu

Effect of Concrete Mixture Proportions on the Chloride Resistance
pp. 2854-2859(6)
Authors: Xue, Wen; Chen, Ju; Jin, Weiliang; Xiong, Yongguang

Microstructural Characterization and Mechanical Properties of Mg-Zr-Ca Alloys Prepared by Hot-Extrusion for Biomedical Applications
pp. 2860-2863(4)
Authors: Zhou, Ying-Long; Luo, Dong-Mei; Hu, Wang-Yu; Li, Yuncang; Hodgson, Peter; Wen, Cuié

Multiple-Obstacle Avoidance and Role Reassignment in Robot Formation Control
pp. 2864-2868(5)
Authors: Wang, Yin-Tien; Chen, Yu-Cheng

Finite Element Method Analysis and Digital Control for Radial AC Hybrid Magnetic Bearings
pp. 2869-2874(6)
Authors: Zhang, Weiyu; Pan, Wei; Yang, Zebin; Zhu, Huangqiu

Characteristics of Pulverizer Rejects and Numerical Simulation for Medium Speed Mill
pp. 2875-2879(5)
Authors: Zhu, Xianran; Zhou, Ting; Zhao, Zhenning; Zhang, Qingfeng

Optimal Design of a Vibration Compensation System
pp. 2880-2884(5)
Authors: Lee, Kingsun; Lin, Jui-Chang

Study on Multi-Views Point Clouds Registration
pp. 2885-2889(5)
Authors: Xinhe, Liang; Jin, Liang; Zhenzhong, Xiao; Jianwei, Liu; Cheng, Guo

Experimental and Numerical Studies on Tension Behavior of Casing and Dowel Joint of Square Steel Tube
pp. 2890-2896(7)
Authors: Ding, Min; Hou, Zhenhua; Jiang, Xiugen; Lin, Zichen; Zhang, Guangkui; Ju, Jinsan

Seismic Energy Response Analysis of Reinforced Concrete Moment Resisting Frame Structures
pp. 2897-2901(5)
Authors: Chang, L.; Ye, X. G.; Wang, D. C.; Li, K. N.

Spectral Characteristics of Fluctuating Wind Pressure on a Large-Span Roof
pp. 2902-2906(5)
Authors: Wang, Xin; Xing, Yan

Dynamic Analysis of Underwater Launched Vehicle During Water Exit
pp. 2907-2910(4)
Authors: You, Tianqing; Wang, Cong; Cao, Wei; Wei, Yingjie; Zhang, Jiazhong

A Study of EPS Control Strategy Based on Multibody Dynamics
pp. 2911-2915(5)
Authors: Wang, Liangmo; Zhang, Wei; Cao, Guoqiang; Chen, Tian; Wang, Xiaolin

Research and Realization of Parameterized Mould Base Library of Injection Mould Based on Pro/E
pp. 2916-2921(6)
Authors: Cai, Donggen; Zhou, Tianrui

Real-Time Prediction of Filling Pattern for Polymer Injection Molding
pp. 2922-2926(5)
Authors: Zhao, Peng; Fu, Jianzhong; Zhou, Huamin; Li, Yang

An Ontology-Driven Hierarchical Modeling Method for Multi-Disciplinary Collaborative Design
pp. 2927-2932(6)
Authors: Hao, Yongping; Wang, Chunyan; Zeng, Pengfei; Xu, Xiaolei

Propagation Characteristics of Ultrasonic Guided Wave in Damage Detection of Rail
pp. 2933-2940(8)
Authors: Song, Zhenhua; Wang, Zhihua; Ma, Hongwei

An Optimized Anomaly Intrusion Detection Scheme Using KNN Algorithm
pp. 2941-2945(5)
Authors: Du, Ye; Zhang, Ruhui; Liu, Jiqiang; Li, Meihong; Yuan, Zhonglan

The Research and Development of Integrating Database in Casting Process
pp. 2946-2950(5)
Authors: Wang, Qingrong; Zhu, Changsheng; Zhang, Qiuyu; Yuan, Zhanting

Testing and Numerical Analysis of Elastoplastic Steel Column Impacted by Rigid Body
pp. 2951-2956(6)
Authors: He, Yuzhi; Liu, Changyun; Jiang, Xiugen; Hou, Zhenhua; Zhang, Guangkui; Ju, Jinsan

Sensitivity Analysis of Continuous Web Plate Joint of Steel Beam to Concrete-Filled Steel Tubular Column Based on Correlation
pp. 2957-2962(6)
Authors: Pan, Jianrong; Wang, Zhan; Su, Cheng

Research Advances of Bamboo-Steel Composite Structural Members
pp. 2963-2967(5)
Authors: Shen, Huangying; Li, Yushun; Zhang, Zhenwen; Zhang, Wangli

Seismic Behavior of Buckling Restrained Braced Composite Frames
pp. 2968-2972(5)
Authors: Guo, Yurong; Wang, Zhimao; Xiao, Yan

Seismic Evaluation of Transfer-Storey Structures Based on Philosophy of Capacity Design
pp. 2973-2979(7)
Authors: Ji, Jing; Han, Xiaolei; Cheang, Jack

Three Dimensional Cellular Automaton for Simulation of the Multi-Pit Corrosion Damage Evolution
pp. 2980-2985(6)
Authors: Wang, Hui; Song, Bifeng; Wang, Le; Lv, Guozhi

A Note on Variable Upper Limit Integral of Bézier Curve
pp. 2986-2990(5)
Authors: Wang, Yiduo; Hu, Bifu; Xi, Ping; Xue, Wei

Failure Assessments of Porous Aluminum Sheets Under Stretching Procedures
pp. 2991-2995(5)
Authors: Liao, Kuo-Chi; Chen, Chi-Luen; Chang, Ker-Ming

The Study of Error Evaluation Strategy of Complex Surface in On-Machine Verification System
pp. 2996-3001(6)
Authors: He, Gaiyun; Zhang, Song; Ding, Baihui; Zhang, Mei

Study on Formation Mechanism of Saw-Tooth Chip of Titanium Alloy by FEM
pp. 3002-3006(5)
Authors: Yang, Yong; Wang, Yuling; Li, Changhe

Steady-State Performance Research on a New Water Hydraulic Servo Valve Using Finite Element Method
pp. 3007-3012(6)
Authors: Xinhua, Wang; Jiaqing, Chang; Gang, Zheng; Shuwen, Sun; Jian, Zheng

Evolutionary Shape Design Using Genetic Algorithms
pp. 3013-3017(5)
Authors: Tsai, Hung-Cheng; Tseng, Sei-Wo Winger; Tsai, Hung-Jung

Seismic Behavior and Drift Limits of Different Performance Levels for Steel Reinforced Concrete Columns
pp. 3018-3022(5)
Authors: Guo, Zixiong; Liu, Yang; Huang, Qunxian

Study on Vibration Control of Long Cable with Shape Memory Alloy Damper
pp. 3023-3026(4)
Authors: Liu, Ai-Rong; Yu, Qi-Cai; Zhang, Jun-Ping; Xie, Sheng-Fen; Guo, Yu-Zhu

Discussion on Formula of Ultimate Bearing Capacity of RPC Filled Circular Steel Tube Slender Columns
pp. 3027-3031(5)
Authors: Wu, Yanhai; Yao, Liangyun

The Effects of Concrete Cracks on Interfacial Properties of RC Beams Strengthened with FRP
pp. 3032-3038(7)
Authors: Guo, Y. C.; Li, L. J.; Huang, P. Y.; Xie, J. H.

Shaketable Test of Seismic Isolation Structure Based on Shape Memory Alloy Wire-Laminated Rubber Combined Bearings
pp. 3039-3045(7)
Authors: Liu, Haiqing; Wang, Jinli; Ou, Jinping

A Knowledge-Driven Product Design Method Based on Solving Constraint Equation Group
pp. 3046-3051(6)
Authors: Pan, Zhiyi; Gao, Shunde; Wang, Xin; Luo, Yaoxi

Parameter Hierarchical Identification for Magnetic Bearing Control System Using Frequency Response Testing Method
pp. 3052-3056(5)
Authors: Zheng, Shiqiang; Han, Bangcheng

A Method of Measuring Points Distribution on Structural Features with Attribute Matrix
pp. 3057-3061(5)
Authors: Zeng, Debiao; Zheng, Guolei; Zhao, Huangjin; Zeng, Chunling; Liu, Ping

FEM Analysis of Deformation-Induced Heating for Auto-Steel in Stamping Production
pp. 3062-3066(5)
Authors: Wang, Wen-Ping; Wan, Min; Wu, Xiang-Dong; Diao, Ke-Shan

A Geometric Polygon Based Computer Aided Locating Error Model for Fixture Design
pp. 3067-3071(5)
Authors: Qin, Guohua; Yu, Zuxi; Ye, Haichao; Lu, Dong

Analysis on the Fatigue Break Mechanism of the Brush-Shape High Molecular Cleaning Element
pp. 3072-3076(5)
Authors: Meng, Yanmei; Lu, Guancheng; Xu, Kai; Li, Shangping; Ma, Fanglan

The Behavior of Mechanical Energy Storage Mechanisms and Representation
pp. 3077-3081(5)
Authors: Wang, Meiyan; Shen, Lianguan; Deng, Yimin

A Visualization Analysis System for Three-Dimensional Stability Assessment of Landslides and Its Application
pp. 3082-3087(6)
Authors: Jiang, Qinghui; Zhou, Chuangbing; Wei, Wei; Chi, Yao

TOPSIS Model and Its Application of the Determination of Location Datum
pp. 3088-3092(5)
Authors: Wu, Tiejun; Lou, Peihuang

Three-Dimensional Tool Radius Compensation for a 5-Axis Peripheral Milling
pp. 3093-3096(4)
Authors: Youdong, Chen; Hongxing, Wei; Tianmiao, Wang

Novel Tools for the Study of Symbol Semantic Model for Conceptual Design Support
pp. 3097-3102(6)
Authors: Feng, Yi-Xiong; Tan, Jian-Rong; Hagiwara, Ichiro

Dynamics Characteristic of Cutter Wear in High Speed Milling Hardened Steel
pp. 3103-3107(5)
Authors: Jiang, Bin; Qi, Changxing; Xia, Danhua; Cao, Shuai; Chen, Bo

Clustering Based Basic Product Mapping in NC Machine Tool Families: A Case Study
pp. 3108-3112(5)
Authors: Huang, Yanqun; Li, Xu

Micromachining on the Chrome Stainless Mold Steel Using the Femtosecond Laser
pp. 3113-3118(6)
Authors: Choi, Sanghoon; Kim, Changwhan; Kim, Wihan; Sohn, Ikbu; Lee, Ho

Seismic Performance of Stainless Steel Reinforced Concrete Columns
pp. 3119-3123(5)
Authors: Zhang, Guoxue; Zhang, Zhihao; Wang, Changwei

Visualization of Structural Damage Detection Using Vibration-Based Identification Techniques
pp. 3124-3130(7)
Authors: Zhenhua, Nie; Hongwei, Ma

Analysis of Out-Of-Plane Stability for Cantilever Steel Tube-Truss Structure Under Uniform Load
pp. 3131-3135(5)
Authors: Han, Qinghua; Xu, Zemin; Lu, Yan; Dong, Yu

Calculation of Shield Tunnel Vertical Surrounding Rock Pressure Based on Dimensional Analysis
pp. 3136-3139(4)
Author: Wu, Qixing

Iso-Scallop Controlled Tool Path Generation for Free-Form Surfaces Based on Level Set Method
pp. 3140-3145(6)
Authors: Shen, Hongyao; Fu, Jianzhong; Chen, Zichen; Gan, Wenfeng

Strength Reduction Analysis for the Stability of Pile-Slope System
pp. 3146-3150(5)
Authors: Sun, Shuwei; Zhu, Benzhen; Bian, Xiaolin

Adaptive Wavelet Finite Element Method for Partial Differential Equation
pp. 3151-3154(4)
Authors: Tang, Yan; Xiang, Jiawei; Xu, Jinyong; Ye, Fangyong; Lan, Yushen

Conjugate Gradient Back Analysis of Mechanical Parameters of Box Structure Based on Layered Shell Element
pp. 3155-3160(6)
Authors: Zhang, Jian; Lan, Wengai; Zhou, Chuwei; Yang, Ting; Huang, Jianfeng

A Methodology for Evaluating Large Rigid Pipeline–Soil Interactions
pp. 3161-3166(6)
Authors: Li, Xinggao; Wang, Ting; Song, Xin

Research on the Key Technologies of Finite Element Numerical Simulation for the Carburization
pp. 3167-3172(6)
Authors: He, Lianfang; Zhao, Guoqun; Li, Huiping

Research on the Geometry Theory of Original Scroll Profiles for Scroll Vacuum Pump
pp. 3173-3177(5)
Authors: Wang, Licun; Wang, Xudong; Hussain, Sinan H.

Layout Design of Satellite Module Using a Modified Artificial Bee Colony Algorithm
pp. 3178-3181(4)
Authors: Shi, Yanjun; Li, Bo; Zhang, Zihui

Ergonomics Based Computer-Aided Layout Design Method for Modern Complex Control Panels
pp. 3182-3186(5)
Authors: Yan, Shengyuan; Yu, Kun; Zhang, Zhijian; Peng, Minjun

Template-Based Integrated Design Environment for Rocket Design
pp. 3187-3192(6)
Authors: Hu, Chunsheng; Xu, Chengdong

Notch Effect and FEM Analysis of Tensile Behavior of Ti-6Al-4V
pp. 3193-3201(9)
Authors: Tsai, Gwo-Chung; Wang, Shing-Hoa; Wang, Chi-Chong; Kao, Chin-Hai

Dynamic Characteristic Analysis and Parameter Optimization of the Guide Roll System
pp. 3202-3205(4)
Authors: Zhao, Dong; Xu, Zenghai; Wang, Qiang

Study on Machining Distortion of Titanium Alloy Aircraft Monolithic Component by Finite Element Method and Experiment
pp. 3206-3210(5)
Authors: Yang, Yong; Wang, Yuling; Li, Changhe

Dynamics Analysis of a Double-Disk Rotor with Two Breathing Cracks Based on Finite Element Method
pp. 3211-3218(8)
Authors: Liu, Changli; Cui, Li; Jiang, Jun; Xie, Pengru; Zheng, Jianrong

Research on Product Configuration Technology Based on Product Family
pp. 3219-3222(4)
Authors: Jing, Ni; Liangwei, Zhong; Guangle, Yan

The Boundary Refining for Part Model Used in CAE Software
pp. 3223-3227(5)
Authors: Wang, Wei; Zhao, Gang; Shi, Fazhong

Second-Contact Analysis of Elastic Bar Impacted by a Rigid Body
pp. 3228-3232(5)
Authors: Ju, Jinsan; Liu, Changyun; Hou, Zhenhua; Zhang, Guangkui; Jiang, Xiugen

A Grid-Based Remote Monitoring and Diagnosis System for the Railway Roadbed Roller Compaction
pp. 3233-3237(5)
Authors: Wu, Hao; Li, Yan; Chen, Nan; Xiao, Shaozhi; Cui, Wei

Research and Implementation of Bird-Strike Resistance Synthetic Analysis Platform for Civil Aircraft
pp. 3238-3242(5)
Authors: Yingnan, Guo; Qin, Sun; Ling, Wu

Analysis of Multi-Layer Sandwich Structures by Finite Element Method
pp. 3243-3248(6)
Authors: Mathew, Ninan; Jiang, Zhengyi; Wei, Dongbin

Moment Capacity and Ductility of Reinforced Concrete Beams Strengthened with Ferrocement Including Steel Bars
pp. 3249-3255(7)
Authors: Xiong, Guangjing; Ye, Surong; Zhu, Zhanxian

Simplified Techniques for Prestress Design and Load Analysis of Geiger Domes
pp. 3256-3260(5)
Authors: Yuan, Xingfei; Wang, Zhenhua; Dong, Shilin

The Influence Analysis of Lateral Load on the Interaction Between Foundation and Subsoil
pp. 3261-3266(6)
Authors: Chen, Cunen; He, Chunbao

Theoretical Analysis and Engineering Application of the Operating Vehicle Load Limit About Sub-Health Bridge
pp. 3267-3271(5)
Authors: Zhang, Junping; Liu, Airong; Wu, Gang; Zeng, Ke

Investigations on Bond Performances Between Concrete and Near-Surface Mounted (NSM) FRP Reinforcement
pp. 3272-3277(6)
Authors: Sui, Lili; Quan, Xinrui; Li, Weiwen; Xing, Feng

Reliability Analysis of Beams Strengthening with Augmented Section
pp. 3278-3282(5)
Authors: Yuan, Bing; Zheng, Huabin; Huang, Yansheng; Song, Huanyi

Research on Design Method for Innovation Dissipation System of RC Frames with Buckling Restrained Braces
pp. 3283-3288(6)
Authors: Wang, Xiuli; Zhang, Xiaojiang; Mo, Yong

Analysis of Dynamic Characteristics of One-way and Crossways Beam String Structures
pp. 3289-3293(5)
Authors: Jiang, Zhengrong; Xu, Mu; Qian, Quan; Shi, Kairong; Cai, Jian; Wang, Shitong