Search Results

An Estimate of the Market Potential for Corrosion Protection, Prevention, and Monitoring Systems in Ships

Authors: Dhiman, Saurav; Datta, Biplab

Source: Journal of Ship Production, Volume 25, Number 4, November 2009 , pp. 214-220(7)

Publisher: Society of Naval Architects and Marine Engineers (SNAME)

Fatigue crack growth behaviour of 4130X steel in H₂S environment

Authors: Zhang, Y.L.; Miao, W.; Sun, Z.Y.; Wang, J.; Zeng, Y.J.

Source: Corrosion Engineering, Science and Technology, Volume 44, Number 6, December 2009 , pp. 462-468(7)

Publisher: Maney Publishing

Some observations on the strength and fatigue properties of samples extracted from cast iron water mains

Authors: BELMONTE, H. M. S.; MULHERON, M. J.; SMITH, P. A.

Source: Fatigue & Fracture of Engineering Materials & Structures, Volume 32, Number 11, November 2009 , pp. 916-925(10)

Publisher: Blackwell Publishing

Influence of roller burnishing on surface properties and corrosion resistance in steel

Authors: Al-Qawabeha, Ubeidulla; Al-Rawajfeh, Aiman Eid; Al-Shamaileh, Ehab

Source: Anti-Corrosion Methods and Materials, Volume 56, Number 5, 2009 , pp. 261-265(5)

Publisher: Emerald Group Publishing Limited

Corrosion fatigue performance of pre-split steel wires for high strength bridge cables

Authors: JIANG, J. H.; MA, A. B.; WENG, W. F.; FU, G. H.; ZHANG, Y. F.; LIU, G. G.; LU, F. M.

Source: Fatigue & Fracture of Engineering Materials & Structures, Volume 32, Number 9, September 2009 , pp. 769-779(11)

Publisher: Blackwell Publishing

Fatigue and Fluoride Corrosion on Streptococcus mutans Adherence to Titanium-Based Implant/Component Surfaces

Authors: Correa, Cassia Bellotto; Pires, Juliana Rico; Fernandes-Filho, Romeu Belon; Sartori, Rafael; Vaz, Luis Geraldo

Source: Journal of Prosthodontics, Volume 18, Number 5, July 2009 , pp. 382-387(6)

Publisher: Blackwell Publishing

Experimental evaluation of lubricant influence on residual stress in turning operations

Authors: Attanasio, A.; Ceretti, E.; Gelfi, M.; Giardini, C.

Source: International Journal of Machining and Machinability of Materials, Volume 6, Numbers 1-2, 9 July 2009 , pp. 106-119(14)

Publisher: Inderscience Publishers

Mechanism of degradation of stabilized corrosion-resistant steel during the welding cycle

Authors: Schmidova, Eva; Svanda, Pavel; Vesely, David; Kalendova, Andrea

Source: Anti-Corrosion Methods and Materials, Volume 56, Number 4, 2009 , pp. 206-217(12)

Publisher: Emerald Group Publishing Limited

The Application-Oriented Heat Treatment of Tool Steels

Authors: Pellizzari, M.; Molinari, A.

Source: Materials and Manufacturing Processes, Volume 24, Numbers 7-8, July 2009 , pp. 723-728(6)

Publisher: Taylor and Francis Ltd

Experimental Analyses of the Influence on Corrosive Environment in Seawater of Vlore Bay to the Centre on Fatigue of Steel A-3

Authors: Kasemi, V.; Haxhiraj, A.

Source: Materials and Manufacturing Processes, Volume 24, Numbers 7-8, July 2009 , pp. 847-849(3)

Publisher: Taylor and Francis Ltd

The influence of the environment and corrosion on the structural integrity of aircraft materials

Authors: RUSSO, S.; SHARP, P. K.; DHAMARI, R.; MILLS, T. B.; HINTON, B. R. W.; CLARK, G.; SHANKAR, K.

Source: Fatigue & Fracture of Engineering Materials & Structures, Volume 32, Number 6, June 2009 , pp. 464-472(9)

Publisher: Blackwell Publishing

Friction stir welding of aluminium alloys

Authors: Threadgill, P L; Leonard, A J; Shercliff, H R; Withers, P J

Source: International Materials Reviews, Volume 54, Number 2, March 2009 , pp. 49-93(45)

Publisher: Maney Publishing

Damage characteristics of fabric reinforced hybrid composite laminates subjected to low energy impacts

Authors: Kaleemulla, K. Mohamed; Siddeswarappa, B.

Source: International Journal of Materials and Product Technology, Volume 34, Number 3, 14 April 2009 , pp. 303-311(9)

Publisher: Inderscience Publishers

Some studies on design and performance analysis of a new low plasticity burnishing tool

Authors: Seemikeri, C.Y.; Brahmankar, P.K.; Mahagaonkar, S.B.

Source: International Journal of Machining and Machinability of Materials, Volume 4, Numbers 2-3, 13 February 2009 , pp. 237-251(15)

Publisher: Inderscience Publishers

Improvement in the fatigue strength of chromium electroplated AISI 4340 steel by shot peening

Authors: VOORWALD, H. J. C.; SILVA, M. P.; COSTA, M. Y. P.; CIOFFI, M. O. H.

Source: Fatigue & Fracture of Engineering Materials & Structures, Volume 32, Number 2, February 2009 , pp. 97-104(8)

Publisher: Blackwell Publishing

Failure Mode of Transcondylar Screws Used for Treatment of Incomplete Ossification of the Humeral Condyle in 5 Dogs

Authors: CHARLES, E. ALASDAIR; NESS, MALCOLM G.; YEADON, RUSSEL

Source: Veterinary Surgery, Volume 38, Number 2, February 2009 , pp. 185-191(7)

Publisher: Blackwell Publishing

Micropitting performance of mineral and biodegradable ester gear oils

Authors: Martins, Ramiro; Seabra, Jorge

Source: Industrial Lubrication and Tribology, Volume 60, Number 6, 2008 , pp. 286-292(7)

Publisher: Emerald Group Publishing Limited

Origins of tensile stress-induced circumferential cracking of waterwall tubes in boilers

Authors: Hsueh, C.H.; Wright, I.G.

Source: Materials at High Temperatures, Volume 25, Number 4, December 2008 , pp. 287-294(8)

Publisher: Science Reviews 2000 Ltd

Ceramic nitride/metal coatings with enhanced fracture toughness and fatigue resistance using a multiscalar laminate architecture

Authors: Savan, Alan; Wosik, Jaroslaw; Gerbig, Yvonne B.; Spiradek-Hahn, Krystina

Source: International Journal of Surface Science and Engineering, Volume 2, Number 6, 26 December 2008 , pp. 419-438(20)

Publisher: Inderscience Publishers

Influence of plasticity on corrosion and stress corrosion cracking behaviour in near neutral pH environment

Authors: Li, X.C.; Eadie, R.L.; Luo, J.L.

Source: Corrosion Engineering, Science and Technology, Volume 43, Number 4, December 2008 , pp. 297-303(7)

Publisher: Maney Publishing