Electropolymerization Treatment of Phenol Wastewater and the Reclamation of Phenol
Electrochemical treatment of phenol wastewater was carried out with stainless steel anodes, and phenol removal was achieved through the electropolymerization process. The effects of phenol concentration and bath voltage were discussed. The original chemical oxygen demand (COD) value was approximately 500 mg/L. After electropolymerization treatment, phenol concentration was 0.087 mmol/L with a removal efficiency of 95.6%, and COD was 68 mg/L with a removal efficiency of 86.5%. During treatment, the average current efficiency was 60.36% and power consumption was 27.62 kJ/kg (6.96 kWh/ton). The electropolymerization reaction was analyzed by cyclic voltammetry, and the polyphenol product was analyzed by scanning electron microscopy and infrared spectroscopy.
Document Type: Research Article
Publication date: November 1, 2012
More about this publication?
- Water Environment Research® (WER®) publishes peer-reviewed research papers, research notes, state-of-the-art and critical reviews on original, fundamental and applied research in all scientific and technical areas related to water quality, pollution control, and management. An annual Literature Review provides a review of published books and articles on water quality topics from the previous year. Published as: Sewage Works Journal, 1928 - 1949; Sewage and Industrial Wastes, 1950 - 1959; Journal Water Pollution Control Federation, 1959 - Oct 1989; Research Journal Water Pollution Control Federation, Nov 1989 - 1991; Water Environment Research, 1992 - present.
- Editorial Board
- Information for Authors
- Submit a Paper
- Subscribe to this Title
- Membership Information
- Information for Advertisers
- WEF Bookstore
- ingentaconnect is not responsible for the content or availability of external websites