Skip to main content

A Simplified Headspace Biochemical Oxygen Demand Test Protocol Based on Oxygen Measurements Using a Fiber Optic Probe

Buy Article:

$30.00 plus tax (Refund Policy)

Abstract:

Batch respirometric tests have many advantages over the conventional biochemical oxygen demand (BOD) method for analysis of wastewaters, including the use of nondiluted samples, a more rapid exertion of oxygen demand, and reduced sample preparation time. The headspace biochemical oxygen demand (HBOD) test can be used to obtain oxygen demands in 2 or 3 days that can predict 5–day biochemical oxygen demand (BOD5) results. The main disadvantage of the HBOD and other respirometric tests has been the lack of a simple and direct method to measure oxygen concentrations in the gas phase. The recent commercial production of a new type of fiber optic oxygen probe, however, provides a method to eliminate this disadvantage. This fiber optic probe, referred to here as the HBOD probe , was tested to see if it could be used in HBOD tests. Gas–phase oxygen measurements made with the HBOD probe took only a few seconds and were not significantly different from those made using a gas chromatograph (t test; n 5 15, R 2 5 0.9995, p , 0.001). In field tests using the HBOD probe procedure, the probe greatly reduced sample analysis time compared with previous HBOD and BOD protocols and produced more precise results than the BOD test for wastewater samples from two treatment plants (University Area Joint Authority [UAJA] Wastewater Treatment Plant in University Park, Pennsylvania, and The Pennsylvania State University [PSU] Wastewater Treatment Plant in University Park). Headspace biochemical oxygen demand measurements on UAJA primary clarifier effluent were 59.9 ± 2.4% after 2 days (HBOD2) and 73.0 ± 3.1% after 3 days (HBOD3) of BOD5 values, indicating that BOD5 values could be predicted by multiplying HBOD2 values by 1.67 ± 0.07 or HBOD3 by 1.37 ± 0.06. Similarly, tests using PSU wastewater samples could be used to provide BOD5 estimates by multiplying the HBOD2 by 1.24 ± 0.04 or by multiplying the HBOD3 by 0.97 ± 0.03. These results indicate that the HBOD fiber optic probe can be used to obtain reliable oxygen demands in batch respirometric tests such as the HBOD test.

Keywords: BIOCHEMICAL OXYGEN DEMAND; FIBER OPTIC PROBE; GAS CHROMATOGRAPH; HEADSPACE BIOCHEMICAL OXYGEN DEMAND; KEYWORDS: BIOCHEMICAL OXYGEN DEMAND; OXYGEN MEASUREMENT; RESPIROMETRIC TESTS

Document Type: Research Article

DOI: http://dx.doi.org/10.2175/106143004X141555

Publication date: January 1, 2004

More about this publication?
  • Water Environment Research® (WER®) publishes peer-reviewed research papers, research notes, state-of-the-art and critical reviews on original, fundamental and applied research in all scientific and technical areas related to water quality, pollution control, and management. An annual Literature Review provides a review of published books and articles on water quality topics from the previous year.

    Published as: Sewage Works Journal, 1928 - 1949; Sewage and Industrial Wastes, 1950 - 1959; Journal Water Pollution Control Federation, 1959 - Oct 1989; Research Journal Water Pollution Control Federation, Nov 1989 - 1991; Water Environment Research, 1992 - present.
  • Editorial Board
  • Information for Authors
  • Submit a Paper
  • Subscribe to this Title
  • Membership Information
  • Information for Advertisers
  • WEF Bookstore
  • Ingenta Connect is not responsible for the content or availability of external websites
wef/wer/2004/00000076/00000001/art00005
dcterms_title,dcterms_description,pub_keyword
6
5
20
40
5

Access Key

Free Content
Free content
New Content
New content
Open Access Content
Open access content
Subscribed Content
Subscribed content
Free Trial Content
Free trial content
Cookie Policy
X
Cookie Policy
Ingenta Connect website makes use of cookies so as to keep track of data that you have filled in. I am Happy with this Find out more