Treatment of MTBE-Contaminated Water Using Fenton=s Reagent: Effects of Single and Multiple Addition of Reagent on the Overall Reaction Efficiency.
Abstract:Previous studies indicate that under certain reaction conditions, Fenton's Reagent (FR) can be used for the removal of low concentrations of MTBE in water. However, a better understanding of the Fenton reaction is necessary for the optimization of this technology. Therefore, this study focuses on the effect of the method of addition of FR on the overall efficiency of the reaction. Single and multiple addition of FR to the reaction solution were tested. Initially, an MTBE concentration of 2 mg/L was treated with FR added in a single dose with a concentration equivalent to a [FR:MTBE] molar ratio of 10:1 at pH of 3.0 (Exp.1). Exp. 2 investigated the effect of an extra dose of the same concentration of FR added at t=30 min and finally, Exp. 3 studied the results of using an [FR:MTBE] of 20:1 added in a single dose. Exp.1 was a control test, while Exps.2 and 3 were performed to establish the effect of using a [FR:MTBE] molar ratio of 20:1 with multiple and single dose respectively.
Document Type: Research Article
Publication date: January 1, 2002
More about this publication?
- Proceedings of the Water Environment Federation is an archive of papers published in the proceedings of the annual Water Environment Federation® Technical Exhibition and Conference (WEFTEC® ) and specialty conferences held since the year 2000. These proceedings are not peer reviewed. WEF Members: Sign in (right panel) with your IngentaConnect user name and password to receive complimentary access.
- Subscribe to this Title
- Membership Information
- About WEF Proceedings
- WEFTEC Conference Information
- Ingenta Connect is not responsible for the content or availability of external websites