Authors: Buchan S.; Smith D.T.

Source: Marine Georesources and Geotechnology, Volume 17, Number 1, 1 January 1999 , pp. 65-81(17)

Publisher: Taylor and Francis Ltd

Abstract:

Oedometer tests have been carried out on 70 undisturbed surficial clays (at approximately 250 mm below the mudline), mostly collected by free-fall corers from sites widely scattered throughout the deep-sea North Atlantic. Acoustic measurements were also made, initially on contiguous samples and ultimately on the same sample using a geophysically instrumented oedometer which also collected electrical resistivity data. Apart from those quiescent areas below the carbonate compensation depth, such as north of the West Indies where very fine clays exist, most of the samples are silty clays whose geotechnical-geophysical properties are dependent on the type of clay minerals present (and their ability to take in moisture), the sand-size fraction, and the quantity of carbonate present. Thus the pure clays have high compressibilities which decrease on the addition of coarse particles, while the converse is true for the acoustic parameters, these increasing with the sand fraction. Using the notion of the intrinsic compression line for all samples, and comparison to it of the measured compression curves, it is clear that, contrary to some previously held ideas, most deep-sea clays are normally consolidated; the addition of carbonate has the effect of creating an open, stronger sediment skeleton. Interestingly, where information is available, the variation with depth of a sample's acoustic velocity follows the void ratio pressure relationship of the compression curve. This allows the construction of an in-situ sediment compression curve using the in-situ geophysical observations.

Keywords: ACOUSTICS; CARBONATE; ELECTRICAL; RESISTIVITY; MINERALOGY; NORTH; ATLANTIC; OVERCONSOLIDATION; SAND; FRACTION; SILTY; CLAYS; VOID; INDEX

Language: English

Document Type: Research article

Publication date: 1999-01-01

More about this publication?

• Information for Authors
• Subscribe to this Title
• ingentaconnect is not responsible for the content or availability of external websites

Related content

• In this: publication
• By this: publisher
• In this Subject: Geology ,  Mining & Metallurgy
• By this author: Buchan S. ;  Smith D.T.

Website © Publishing Technology. Article copyright remains with the publisher, society or author(s) as specified within the article.

• Terms and conditions
• Privacy policy
• Information for advertisers