IngentaConnect Performance of Microchannel Heat Sinks with Newtonian and Non-New...

Abstract:

In this paper, the flow behavior and heat transfer performance of a microchannel heat sink is examined. Microchannel heat sink is a heat exchanger that is used to control the temperature of electronic devices with high heat flux capacity. A comprehensive thermal model for a microchannel should include a three-dimensional conduction analysis in the solid parts, followed by an extensive three-dimensional developing flow in the fluid region. The heat transfer analysis in the transition region of the fluid section is a crucial matter. Hydrodynamic and thermal entrance lengths are two important parameters, among others, which are studied in the solution. To examine the potential of using a non-Newtonian fluid, the power law model was used for both Newtonian and non-Newtonian fluids. The numerical solution of the problem was based on a finite difference approach using a control volume with staggered grid system. The SIMPLE algorithm was applied to the problem, and convection terms were estimated using QUICK method. A comparison of the Newtonian and non-Newtonian results showed that for shear thinning fluids, the pressure drop could reduce up to 45%, while for shear thickening fluids, it can increase up to 48%. The same comparison for the Nusselt number showed about a 160%increase with shear thinning fluids and a 43%decrease with shear thickening fluids. The thermal resistance at a Reynolds number of 50 will reduce approximately 25%with shear thinning fluids and will increase approximately 5%with shear thickening fluids. At higher values of the Reynolds number, the changes in the value of the thermal resistance are more pronounced.

The full text electronic article is available for purchase. You will be able to download the full text electronic article after payment.

$45.09 plus tax Refund Policy

Performance of Microchannel Heat Sinks with Newtonian and Non-Newtonian Fluids