IngentaConnect LASER-INDUCED FLUORESCENCE TEMPERATURE SENSOR FOR IN-FLIGHT DROPL...

Authors: Escobar S.¹; González J. E.¹; Rivera L. A.²

Source: Experimental Heat Transfer, Volume 14, Number 2, 1 April 2001 , pp. 119-134(16)

Abstract:

In this work, laser-induced fluorescence (LIF) is used to develop a noncontact temperature sensor. The noninvasive sensor is sensible, reversible, and reproducible to temperature changes, and can be used as a temperature indicator for in-flight droplets. A calibration curve relating fluorescence emission intensity to temperature of a solution was developed for a mixture of ethanol-pyrene at 5 mM concentration. The percentage by mass of the mixture is 99.9% ethanol and 0.1% pyrene. The calibration curve was used as a noninvasive sensor to measure temperature of in-flight droplets. The mixture of ethanol- pyrene concentration at 5 mM was used as the base fluid to generate droplets of 215

m. These droplets were atomized at a velocity of 10 m/s. Droplet temperature measurements were achieved at 1.9, 2.9, and 3.9 cm downward from the tip of the atomizer with the aid of the noncontact thermometer. The initial temperatures of the droplets were changed to 50, 40, and 33°C, and the resulting decrease in temperatures was attributed to heat and mass transfer between the droplets and the surrounding environment.

Language: English

Document Type: Research article

Affiliations: 1: Department of Mechanical Engineering, University of Puerto Rico-Mayagüez, Mayagüez, Puerto Rico 2: Department of Chemistry, University of Puerto Rico—Mayagüez, Mayagüez, Puerto Rico

The full text electronic article is available for purchase. You will be able to download the full text electronic article after payment.

$45.29 plus tax Refund Policy

LASER-INDUCED FLUORESCENCE TEMPERATURE SENSOR FOR IN-FLIGHT DROPLETS