Philosophical Magazine

Instrumented indentation testing in materials research and development
pp. 5153-5154(2)

Modelling of sharp indentation experiments: some fundamental issues
pp. 5155-5177(23)
Author: Larsson, P.-L.

The extended Hertzian theory and its uses in analyzing indentation experiments
pp. 5179-5197(19)
Author: Schwarzer, N.

Some results on the indentation of an elastic half space
pp. 5199-5217(19)
Author: Woirgard, J.

Mechanical analysis of indentation experiments with a conical indenter
pp. 5219-5230(12)
Authors: Felder, E.; Ramond-Angélélis, C.

Effect of lateral displacement on the surface stress distribution for cone and sphere contact
pp. 5231-5237(7)
Author: Schwarzer, N.

Analytical correlation of indentation experiments
pp. 5239-5250(12)
Author: Felder, E.

Classical and differential hardness: aspects of quantifying the deformation response in indentation experiments
pp. 5251-5264(14)
Author: Wolf, B.

Comparison of nanoindentation results obtained with Berkovich and cube-corner indenters
pp. 5265-5283(19)
Authors: Chudoba, T.; Schwaller, P.; Rabe, R.; Breguet, J.-M.; Michler, J.

An experimental evaluation of the constant β relating the contact stiffness to the contact area in nanoindentation
pp. 5285-5298(14)
Authors: Strader, J H.; Shim, S.; Bei, H.; Oliver, W. C.; Pharr, G. M.

About the importance of introducing a correction factor in the Sneddon relationship for nanoindentation measurements
pp. 5299-5307(9)
Authors: Troyon, M.; Lafaye, S.

Nanoindentation study on elastic and plastic anisotropies of Cu single crystals
pp. 5309-5320(12)
Authors: Wang, W.; Lu, K.

Analysis of nanoindentation tests on SiC-based ceramics
pp. 5321-5329(9)
Authors: Guicciardi, S.; Melandri, C.; Sciti, D.; Pezzotti, G.

Measuring and modelling the instrumented indentation (nanoindentation) response of coated systems
pp. 5331-5346(16)
Authors: Page, T. F.; Bull, S. J.

A simple guide to determine elastic properties of films on substrate from nanoindentation experiments
pp. 5347-5358(12)
Authors: Bec, S.; Tonck, A.; Loubet, J. L.

Elastic contact to nearly incompressible coatings: Stiffness enhancement and elastic pile-up
pp. 5359-5369(11)
Authors: Barthel, E.; Perriot, A.; Chateauminois, A.; Frétigny, C.

Instrumented indentation on alumina-alumina/zirconia multilayered composites with residual stresses
pp. 5371-5382(12)
Authors: Jiménez-Piqué, E.; Ceseracciu, L.; Gaillard, Y.; Barch, M.; De Portu, G.; Anglada, M.

Strength measurement of a brittle coating with a trilayer structure using instrumented indentation and in situ observation techniques
pp. 5383-5396(14)
Authors: Kim, J. H.; Lee, H.-K.; Kim, D. K.

Indentation fracture of a-C:H thin films from chemical vapour deposition
pp. 5397-5406(10)
Authors: Lepienski, C. M.; Michel, M. D.; Araújo, P. J. G.; Achete, C. A.

Effect of hydrogen on mechanical properties of nitrided austenitic steels
pp. 5407-5418(12)
Authors: Lepienski, C. M.; Kuromoto, N. K.; Souza, J. F. P.; Foerster, C. E.; Serbena, F. C.; Silva, S. L. R.

Structure-dependent triple junction hardening and intergranular fracture in molybdenum
pp. 5419-5429(11)
Authors: Kobayashi, S.; Tsurekawa, S.; Watanabe, T.

Impact of domain anisotropy on CTE of isotropic microcrystalline material
pp. 5431-5440(10)
Author: Efremov, A. M.

Scale dependence of the Young's modulus measured by nanoindentation in columnar YSZ EB-PVD thermal barriers coatings
pp. 5441-5451(11)
Authors: Gaillard, Y.; Jimenez-Pique, E.; Anglada, M.

Indentation on YSZ thermal barrier coating layers deposited by electron beam PVD
pp. 5453-5463(11)
Authors: Park, S. H.; Kim, S. K.; Kim, T. W.; Paik, U.; Lee, K. S.

Nanoindentation and nanofriction on DLC films
pp. 5465-5476(12)
Authors: Bec, S.; Tonck, A.; Fontaine, J.

Nanomechanical and analytical investigations of tribological layers for wear protection in slow-running roller bearings
pp. 5477-5495(19)
Authors: Reichelt, M.; Weirich, T.; Richter, S.; Aretz, A.; Bückins, M.; Wolf, T.; Gold, P. W.; Mayer, J.

Using the instrumented indentation technique for stress characterization of friction stir-welded API X80 steel
pp. 5497-5504(8)
Authors: Lee, Y.; Kim, J.-Y.; Lee, J.-S.; Kim, K.-H.; Koo, J. Y.; Kwon, D.

On the analysis of the stress-strain behaviour of thin metal films on substrates using nanoindentation
pp. 5505-5519(15)
Authors: Huber, N.; Tyulyukovskiy, E.; Kraft, O.

On the measurement of yield strength by spherical indentation
pp. 5521-5539(19)
Authors: Herbert, E. G.; Oliver, W. C.; Pharr, G. M.

Determination of plastic properties of polycrystalline metallic materials by nanoindentation: experiments and finite element simulations
pp. 5541-5551(11)
Authors: Backes, B.; Durst, K.; Göken, M.

Size effect in tension of thin films on substrate: a study based on the reformulation of mechanism-based strain gradient plasticity
pp. 5553-5566(14)
Authors: Yun, G.; Hwang, K. C.; Huang, Y.; Wu, P. D.; Liu, C.

Size effects in the deformation of sub-micron Au columns
pp. 5567-5579(13)
Authors: Volkert, C. A.; Lilleodden, E. T.

On the indentation size effect in spherical indentation
pp. 5581-5593(13)
Authors: Spary, I. J.; Bushby, A. J.; Jennett, N. M.

Nucleation of dislocations during nanoindentation in MgO
pp. 5595-5606(12)
Authors: Tromas, C.; Gaillard‡, Y.; Woirgard, J.

Elastic and viscoelastic contact mechanics of coating/substrate composites in axisymmetric indentation
pp. 5607-5624(18)
Author: Sakai, M.

Analytical techniques for indentation of viscoelastic materials
pp. 5625-5641(17)
Author: Oyen, M. L.

Indentation contact deformation of superplastic and non-superplastic 3Y-TZP at elevated temperatures
pp. 5643-5652(10)
Authors: Muto, H.; Yamada, R.; Matsuda, A.; Sakai, M.

Viscoelastic effects during depth-sensing indentation of cortical bone tissues
pp. 5653-5666(14)
Authors: Tang, B.; Ngan, A. H. W.; Lu, W. W.

A new index to estimate the strain rate sensitivity of glassy polymers using conical/pyramidal indentation
pp. 5667-5677(11)
Authors: Kermouche, G.; Loubet, J. L.; Bergheau, J. M.

Linear analysis of the viscoelastic response of polymer micro-pillars using the open-loop flat punch indentation test
pp. 5679-5690(12)
Authors: Kim, J.-H.; Jeong, S.-J.; Lee, H.-J.; Han, S.-W.; Choi, B.-I.; Park, S.-H.; Yang, D.-Y.

Viscoelastic properties of bone as a function of hydration state determined by nanoindentation
pp. 5691-5703(13)
Authors: Bembey, A. K.; Oyen, M. L.; Bushby, A. J.; Boyde, A.

Nanoindentation in teeth: influence of experimental conditions on local mechanical properties
pp. 5705-5714(10)
Authors: Guidoni, G.; Denkmayr, J.; Schöberl, T.; Jäger, I.

Discrete deformation in amorphous metals: an in situ SEM indentation study
pp. 5715-5728(14)
Authors: Moser, B.; Löffler, J. F.; Michler, J.

Optical indentation microscopy-a new family of instrumented indentation testing
pp. 5729-5737(9)
Authors: Miyajima, T.; Sakai, M.

High temperature instrumented microindentation: applications to thermal barrier coating constituent materials
pp. 5739-5752(14)
Authors: Passilly, B.; Kanoute, P.; Leroy, F.-H.; Mévrel, R.

Hardness testing under a different light: combining synchrotron X-ray microdiffraction and indentation techniques for polymer fibres studies
pp. 5753-5767(15)
Authors: Gourrier, A.; García-Gutiérrez, M. C.; Riekel, C.