Quality Changes of Superheated Steam-Dried Fibers from Oil Palm Empty Fruit Bunches

Authors: Hasibuan, Rosdanelli¹; Wan Daud, Wan Ramli²

Source: Drying Technology, Volume 27, Number 2, February 2009 , pp. 194-200(7)

Buy & download fulltext article:

Price: $56.94 plus tax (Refund Policy)

Abstract:

Conventional drying of the fibers from oil palm empty fruit bunches (EFB) using flue gas from diesel burners frequently causes browning and dust explosion. Replacing the drying medium with superheated steam is expected to improve the quality of EFB fibers as well as improve the safety of the dryer operation. In this study, the effects of steam temperature and steam velocity on the quality of steam-dried EFB fibers was investigated. The drying experiment was carried out at atmospheric pressure with steam superficial velocity in the range of 0.3 to 0.49 m s-1 and temperature in the range of 135 to 200°C. Three quality parameters of the EFB fibers, the color, strength, and microstructure, were used to assess the changes in EFB fiber quality as a result of superheated steam drying. The color of the EFB fiber was either improved or not significantly degraded. The strength of the superheated steam-dried EFB fibers was higher than that of undried and hot air-dried EFB fibers. The microstructure of fresh undried EFB fibers as seen by scanning electron microscopy (SEM) showed the presence of round silica particles of 10-20 µm in diameter all over the EFB fiber strand, which complicates pulping and bleaching. Superheated steam drying successfully removed the silica particles from the EFB fibers at temperatures of at least 200°C and a velocity of steam of at most 0.49 m s-1, which is better than hammering, which can only remove 88% of the silica particles. The high temperature of the superheated steam loosened the silica particles from their craters. The EFB fibers cracked and split at steam velocities at or above 0.49 m s-1 and high superheated steam temperatures at or above 200°C and as a consequence became weaker at these conditions. The removal of silica particles by superheated steam drying makes the EFB fiber amenable to pulping and bleaching. Superheated steam drying is therefore found to improve the overall quality of EFB fibers compared to hot air drying.

Keywords: Browning index; Fiber color; Fiber microstructure; Fiber strength; Superheated steam drying

Document Type: Research article

DOI: http://dx.doi.org/10.1080/07373930802603383

Affiliations: 1: Department of Chemical Engineering, University Sumatra Utara, Medan, Indonesia 2: Department of Chemical & Process Engineering, Universiti Kebangsaan Malaysia, Bangi, Selangor, Malaysia

Publication date: 2009-02-01

Quality Changes of Superheated Steam-Dried Fibers from Oil Palm Empty Fruit Bunches

Buy & download fulltext article:

Tools

Key

Text size:

Useful pages