ISSN 1042-6914 (Print); ISSN 1532-2475 (Online)
Publisher: Taylor and Francis Ltd
Synthesis of Hierarchically Porous ZrO2 Monolith by a Template Method pp. 571-575(5) Authors: Long, Tao; Cui, Xingyu; Li, Li; Li, Shiming; Xu, Lanying
Thermite Synthesis of TiC/FeNiCr Cermet with Double-Layer Structure pp. 576-584(9) Authors: Xi, Wenjun; Li, Wenjing; Xu, Tiangang; Liu, Yang; Guo, Shibin; Liu, Guanghua; Li, Jiangtao
Synthesis of High-Phase Purity SrTi1–xZrxO3 Ceramics by Sol-Spray Pyrolysis Method pp. 585-590(6) Authors: Yang, Yushan; Luo, Shunzhong; Dong, Faqin; Ding, Yi; Li, Xingliang
Synthesis and Luminescence of BiPO4:Tb3+ Nanowires by a Hydrothermal Process pp. 591-594(4) Author: Yan, Shu-Qing
Processing of Kaolinite and Alumina Loaded in Natural Rubber Composite Foams pp. 595-604(10) Authors: Tangboriboon, Nuchnapa; Samattai, Surarit; Kamonsawas, Jirarat; Sirivat, Anuvat
Preparation of Aluminum Nitride Ceramics by Aqueous Tape Casting pp. 605-610(6) Authors: Liu, Shichao; Ye, Feng; Liu, Limeng; Liu, Quang; Li, Junyi
Fabrication of Surface-Modified One-Dimensional Titania Nanostructures in the Presence of Chitosan pp. 611-615(5) Authors: Zima, Tatyana; Bataev, Ivan; Smirnov, Alexander
Sintering Characteristics of a Powder Injection Molded Ceria-Stabilized Zirconia–Mullite Composite pp. 616-623(8) Authors: Martin, Renee; Vick, Michael; Enneti, Ravi K.; Atre, Sundar V.
The Hot Workability of SiCp/2024 Al Composite by Stir Casting pp. 624-630(7) Authors: Wang, S. Y.; Tang, Q.; Li, D. J.; Zou, J. X.; Zeng, X. Q.; Ouyang, Q. B.; Ding, W. J.
Analysis of Magnetic Take-Up Roll Employed in Amorphous Alloy Ribbon Production Line pp. 631-636(6) Authors: Song, YanMing; Yang, Yang
Effect of Rapid Solidification on the Microstructure and Magnetic-Field-Induced Strain of Co1.36Ni1.21AlFe0.12 pp. 637-643(7) Authors: Ju, Jia; Xue, Feng; Sun, Liuxia
Experimental Investigation of SLS Process for Flexural Strength Improvement of PA-3200GF Parts pp. 644-653(10) Authors: Negi, Sushant; Sharma, Rajesh Kumar; Dhiman, Suresh
Processing and Mechanism of Dynamic Friction Polishing Diamond Using Manganese-Based Alloy pp. 654-660(7) Authors: Shi, Shuangji; Jin, Zhuji; Zhong, Xiuhong; Lin, Jiazhi; Yin, Bo
Rheological Characterization of MR Polishing Fluid Used for Silicon Polishing in BEMRF Process pp. 661-668(8) Authors: Saraswathamma, K.; Jha, Sunil; Rao, P. Venkateswara
Process Parameter Optimization of Scanning Probe Lithography for Anodic Oxidation of Nanowire pp. 669-676(8) Authors: Kuo, Chung-Feng Jeffrey; Su, Te-Li; Hung, Shih-Jung
Influence of Nb and Y on Hot Corrosion Behavior of Ni–Cr-based Superalloys pp. 677-684(8) Authors: Weng, Fei; Yu, Huijun; Chen, Chuanzhong; Wan, Kai
Laser Ablation of PMMA in Air, Water, and Ethanol Environments pp. 685-691(7) Authors: Tangwarodomnukun, Viboon; Chen, Hung-Yu
Receive new issue alert