Skip to main content

Publisher: Taylor and Francis Ltd

Volume 24, Number 12, December 2009

Favourites:
ADD

An Experimental Study on the Geometry of Microholes in Microelectric Discharge Machining
pp. 1236-1241(6)
Authors: Opoz, Tahsin Tecelli; Ekmekci, Bulent; Erden, Abdulkadir

Favourites:
ADD

Processing of Zirconium-Based Bulk Metallic Glass (BMG) Using Micro Electrical Discharge Machining (Micro-EDM)
pp. 1242-1248(7)
Authors: Yeo, Swee Hock; Tan, Peng Cheong; Aligiri, Erwin; Tor, Shu Beng; Loh, Ngiap Hiang

Favourites:
ADD

Cutting Mechanics of Bulk Metallic Glass Materials on Meso-End Milling
pp. 1249-1255(7)
Authors: Bakkal, M.; Naksi˙ler, V.

Favourites:
ADD

An Experimental and Analytical Study on the Limit Drawing Ratio of Stainless Steel 304 Foils for Microsheet Forming
pp. 1256-1265(10)
Authors: Chen, Chi-Han; Gau, Jenn-Terng; Lee, Rong-Shean

Favourites:
ADD

Micromilling of NiTi Shape-Memory Alloys with Ball Nose Cutters
pp. 1266-1273(8)
Authors: Biermann, Dirk; Kahleyss, Felix; Surmann, Tobias

Favourites:
ADD

Machinability Study in MicroTurning of PA66 GF30 Polyamide with a PCD Tool
pp. 1290-1296(7)
Authors: Gaitonde, V. N.; Karnik, S. R.; Silva, L. R.; Abrao, A. M.; Davim, J. P.

Favourites:
ADD

A New Pulse Discriminating System for Micro-EDM
pp. 1297-1305(9)
Authors: Yeo, S. H.; Aligiri, E.; Tan, P. C.; Zarepour, H.

Favourites:
ADD

Study on PDM-AM-GL/MMT Nanocomposites and Their Application
pp. 1306-1311(6)
Authors: Dangge, Gao; Jianzhong, Ma; Bin, Lu; Yun, Li

Favourites:
ADD

Electro Discharge Machining of Titanium Nitride-Aluminium Oxide Composite for Optimum Process Criterial Yield
pp. 1312-1320(9)
Authors: Bhaduri, D.; Kuar, A. S.; Sarkar, S.; Biswas, S. K.; Mitra, S.

Favourites:
ADD

Development of Hydroxyapatite Coating by Microplasma Spraying
pp. 1321-1330(10)
Authors: Dey, A.; Mukhopadhyay, A. K.; Gangadharan, S.; Sinha, M. K.; Basu, D.

Favourites:
ADD

Computational Model for Substrate Motion in EB-PVD Process
pp. 1331-1336(6)
Authors: Baek, Seungyup; Prabhu, Vittaldas

Favourites:
ADD

Mg/B4C Composites with a High Volume Fraction of Fine Ceramic Reinforcement
pp. 1337-1340(4)
Authors: Kevorkijan, Varuzan; Davor Skapin, Sreco

Favourites:
ADD
Favourites:
ADD

Simulation Study on the LPDC Process for Thin-Walled Aluminum Alloy Casting
pp. 1349-1353(5)
Authors: Zhang, Liqiang; Li, Luoxing; Zhu, Biwu

Favourites:
ADD

Nucleation Effect of Ti-6Al-4V Powder on Al-Si Eutectic Alloy
pp. 1354-1358(5)
Author: Sarajan, Zohair

Favourites:
ADD

Electrodes for Electrochemical Supercapacitors
pp. 1359-1364(6)
Authors: Jacob, Gideon Moses; Yang, Quan Min; Zhitomirsky, Igor

Favourites:
ADD

Investigation of Chip Formation Characteristics in Orthogonal Cutting of Graphite
pp. 1365-1372(8)
Authors: Zhou, L.; Wang, C. Y.; Qin, Z.

Favourites:
ADD

Analysis of Machinability During Hard Turning of Cold Work Tool Steel (Type: AISI D2)
pp. 1373-1382(10)
Authors: Gaitonde, V. N.; Karnik, S. R.; Figueira, Luis; Davim, J. Paulo

Favourites:
ADD

Welding of Duplex Stainless Steel Composite Plate: Influence on Microstructural Development
pp. 1383-1388(6)
Authors: Wang, Shao-Gang; Dong, Gui-Ping; Ma, Qi-Hui

Favourites:
ADD

Some Studies on Densification Behavior Modeling of Al-Pb Alloys Produced by Different Routes
pp. 1389-1397(9)
Authors: Sastry, Ch.; Janardhana, G. Ranga; Kun, Kim

Favourites:
ADD

Comparative Study of 3D Printing Technologies for Rapid Casting of Aluminium Alloy
pp. 1405-1411(7)
Authors: Gill, Simranpreet Singh; Kaplas, Munish

Favourites:
ADD

Weldability of Martensitic Steel by Resistance Spot Welding a Neural Network Optimization in the Automotive Industry
pp. 1412-1417(6)
Authors: Cortez, Victor Hugo Lopez; Valdes, Felipe Arturo Reyes; Trevino, Luis Torres

Favourites:
ADD

In-Situ Detection of Plasma Processing Equipment Using a V-Mask Control Chart
pp. 1418-1422(5)
Authors: Baik, Sung Wook; Kim, Woosuk; Kim, Byungwhan

Favourites:
ADD

Investigation of the Effect of Axial Cutting Force on Circular Diamond Sawblade Used in Marble Cutting Process
pp. 1423-1430(8)
Authors: Aslantas, Kubilay; Ozbek, Onur; Ucun, Ismail; Buyuksaği˙s, I. Sedat

Favourites:
ADD

Improvement of Fatigue Strength of Maraging Steel by Shot Peening
pp. 1431-1435(5)
Authors: Kawagoishi, N.; Nagano, T.; Moriyama, M.; Kondo, E.

Favourites:
ADD

Influence of Shot Peening Process on Contact Fatigue Behavior of Gears
pp. 1436-1441(6)
Authors: Pariente, Ines Fernandez; Guagliano, Mario

Favourites:
ADD

Application of Cost-Effective Stainless Steel for Automotive Components
pp. 1442-1452(11)
Authors: Hariharan, K.; Balachandran, G.; Prasad, M. Sathya

Favourites:
ADD

Design of Heating Cycle in Hydrogen Annealing Furnaces
pp. 1453-1458(6)
Authors: Saboonchi, Ahmad; Hassanpour, Saeid; Bayati, Farzad

Favourites:
ADD

Process Analytics, Modeling, and Optimization of an Industrial Batch Annealing Operation
pp. 1459-1466(8)
Authors: Sahay, Satyam; Mehta, R.; Raghavan, S.; Roshan, R.; Dey, S. J.

Favourites:
ADD

Rheological Characterization of Magnetorheological Finishing Fluid
pp. 1467-1478(12)
Authors: Sidpara, Ajay; Das, Manas; Jain, V. K.

Favourites:
ADD

Design of UAPEF Super Finish Module on ZDC2 Surface
pp. 1479-1486(8)
Author: Pa, P. S.

Favourites:
ADD

  • Access Key
  • Free content
  • Partial Free content
  • New content
  • Open access content
  • Partial Open access content
  • Subscribed content
  • Partial Subscribed content
  • Free trial content
Cookie Policy
X
Cookie Policy
Ingenta Connect website makes use of cookies so as to keep track of data that you have filled in. I am Happy with this Find out more