ISSN 1042-6914 (Print); ISSN 1532-2475 (Online)
Publisher: Taylor and Francis Ltd
Extension of the Three-Particle-Interaction Model for Electrolyte Solutions pp. 737-742(6) Authors: Xinlei, Ge; Xidong, Wang; Wangxi, Zhu; Mei, Zhang; Min, Guo; Wenchao, Li
Metal Recovery and Inorganic Eco-Materials from Tailings by Leaching-Sintering Processes pp. 743-747(5) Authors: Lihua, Xu; Wenchao, Li; Shatokha, Volodymyr; Ming, Liu; Huan, Wang; Songmei, Bi; Yubao, Bi
Molybdenum Electrometallurgical Processes in Ionic Melts pp. 748-751(4) Authors: Malyshev, V. V.; Gab, A. I.; Gaune-Escard, M.
Application of a Peat as an Additive to Prepare Ferrous Gas-Cleaning Sludge for Sintering pp. 752-757(6) Authors: Gogenko, O.; Kekukh, A.; Kotlyar, M.; Shatokha, V.
Ladle Heating Procedure and Its Influence on the MgO-C-Oxidation pp. 758-763(6) Authors: Volkova, O.; Sahebkar, B.; Hubalkova, J.; Aneziris, C. G.; Scheller, P. R.
Smelting of Iron Ore in Fe-Cr-C-Si Melts pp. 764-768(5) Authors: Vardar, E.; Eric, R. Hurman
Physical Modeling of Ferroalloy/Stainless Steel Refining Reactors pp. 769-776(8) Author: Eric, R. Hurman
Synthesis and Characterization of Alumina-Zirconia Nanopowders via an Oxalate Route pp. 777-781(5) Authors: Chandradass, J.; Park, Hoy-Yul; Balasubramanian, M.; Bae, Dong-sik
Synthesis of Copper Nanoparticles by Electroreduction Process pp. 782-785(4) Authors: Raja, Mohan; Subha, J.; Ali, Fathilah Binti; Ryu, Sung Hun
Synthesis and Characterization of Sol-Gel Alumina Fiber by Seeding α-Alumina Through Extended Ball Milling pp. 786-790(5) Authors: Chandradass, J.; Bae, Dong Sik; Balasubramanian, M.
Low-Temperature Rapid Synthesis of LiNbO3 Powder by Molten Salt Methods pp. 791-795(5) Authors: Lin, Ying; Yang, Haibo; Zhu, Jianfeng; Wang, Fen; Luo, Hongjie
Low-Temperature Synthesis of Nanocrystalline KNbO3 pp. 796-799(4) Authors: Lin, Ying; Yang, Haibo; Zhu, Jianfeng; Wang, Fen; Luo, Hongjie
Growth and Studies of Pure and Lithium Bromide-Doped Zinc Tris-Thiourea Sulphate (ZTS) Single Crystals pp. 800-804(5) Authors: Krishnan, C.; Selvarajan, P.; Freeda, T. H.
Effect of Iron on Microstructure of Al-12Si-1Cu-0.1Mg Alloy pp. 805-808(4) Authors: Dhiman, Mohit; Dwivedi, D. K.; Sehgal, Rakesh; Bhat, I. K.
Studies on NaCl Added ADP Single Crystals pp. 809-815(7) Authors: John, N. Joseph; Mahadevan, C. K.
Effect of Impurities on the Crystalline Perfection of ZTS pp. 816-822(7) Authors: Praveen, V. N.; Vijayan, N.; Mahadevan, C. K.; Bhagavannarayana, G.
Thermal and Structural Characterization of Copper-Steel Bonding Interfaces Produced by Impact Welding pp. 823-828(6) Authors: Rojas-Rodriguez, Ignacio; Jaramillo-Vigueras, D.; Velazquez-Hernandez, R.; del Real, A.; Serroukh, I.; Banos, L.; Garcia, J.; Rodriguez-Garcia, M. E.
Effect of Thermomechanical Processing on Forming Limit Diagrams Predicted by Neural Networks pp. 829-833(5) Authors: Dehghani, K.; Shafiei M, A.; Naeimi, H.
Effect of YAG Content on the Properties of YAG-ZrB2 Ceramics pp. 834-837(4) Authors: Song, Jie-Guang; Zhang, Lian-Meng; Li, Jun-Guo
Optimization of the Polishing Parameters for the Glass Substrate of STN-LCD pp. 838-843(6) Authors: Lien, Chi-Hsiang; Guu, Y. H.
Resistance Butt Welding of Zirconium Alloy Material pp. 844-851(8) Authors: Setty, D. S.; Ravinder, Reddy; Murthy, A. L. N.
Dynamic Chip Breaker Design for Inconel 718 Using Positive Angle Tool Holder pp. 852-857(6) Authors: Gullu, Abdulkadir; Karabulut, Sener
Evaluation of Delamination in Drilling GFRP Composites pp. 858-864(7) Authors: Palanikumar, K.; Prakash, S.; Shanmugam, K.
Effect of Feed Rate on Tool Wear in Milling of Al-4%Cu/B4 Cp Composite pp. 865-870(6) Authors: Ubeylı, Mustafa; Acir, Adem; Serdar Karakas, M.; Ogel, Bi˙lgehan
Joining of Duplex Stainless Steel by Plasma Arc, TIG, and Plasma Arc+TIG Welding Processes pp. 871-878(8) Author: Taban, Emel
Composite Protective Coatings on Nitinol Surface pp. 879-883(5) Authors: Gnedenkov, S. V.; Khrisanfova, O. A.; Sinebryukhov, S. L.; Puz', A. V.; Gnedenkov, A. S.
Manufacture of Syntactic Foams Using Starch as Binder: Post-Mold Processing pp. 884-892(9) Authors: Islam, Md Mainul; Kim, Ho Sung
A Review of: “Multiscale Simulation Methods for Nanomaterials, R.B. Ross and S. Mohanty (editors)” pp. 893-894(2) Author: Bhattacharya, Baidurya
Receive new issue alert