Materials and Manufacturing Processes

An Amperometric Solid State NO Sensor Using a LaGaO 3 Electrolyte for Monitoring Exhaust Gas
pp. 225-228(4)
Authors: Dutta, Atanu; Ishihara, Tatsumi

Oxide Nanobelts as Conductometric Gas Sensors
pp. 229-232(4)
Authors: Comini, E.; Faglia, G.; Sberveglieri, G.; Zanotti, L.

Low Pressure Piezoresistive Sensors for Medical Electronics Applications
pp. 233-238(6)
Authors: Pramanik, C.; Saha, H.

Porous Silicon-Based Sensors: Prospects and Challenges
pp. 239-246(8)
Authors: Saha, H.; Pramanik, C.

Porous Titania Thin Films Grown by Anodic Oxidation for Hydrogen Sensors
pp. 247-251(5)
Authors: Mukherjee, T.; Hazra, S. K.; Basu, S.

New Materials for Chemical and Biosensors
pp. 253-256(4)
Authors: Spetz, A.; Nakagomi, S.; Wingbrant, H.; Andersson, M.; Salomonsson, A.; Roy, S.; Wingqvist, G.; Katardjiev, I.; Eickhoff, M.; Uvdal, K.; Yakimova, R.

Indium Tin Oxide Thin-Film Sensor for Detection of Volatile Organic Compounds (VOCs)
pp. 257-261(5)
Authors: Vaishanv, V. S.; Patel, P. D.; Patel, N. G.

Polyaniline as a Gas-Sensor Material
pp. 263-270(8)
Authors: Sengupta, Partha; Barik, Satyananda; Adhikari, Basudam

Magnetic Field and Displacement Sensor Based on Giant Magneto-Impedance Effect
pp. 271-274(4)
Authors: Kaviraj, B.; Ghatak, S.

Metal Oxide Nanoparticles as Novel Gate Materials for Field-Effect Gas Sensors
pp. 275-278(4)
Authors: Roy, S.; Salomonsson, A.; Spetz, A.; Aulin, C.; Käll, P.-O.; Ojamäe, L.; Strand, M.; Sanati, M.

Analysis of Volatile Bread Aroma for Evaluation of Bread Freshness Using an Electronic Nose (E-Nose)
pp. 279-283(5)
Authors: Botre, B.; Gharpure, D.

Polymer Light-Emitting Diode Using a New Electrophosphorescent Cyclometalated Iridium Complex
pp. 285-289(5)
Authors: Gupta, Dipti; Singh, Sanjeev; Katiyar, Monica; Deepak; Hazra, Tanima; Verma, Avani; Manoharan, Sundar

Synthesis, Characterization, and Cytotoxicity Analysis of a Biodegradable Polyurethane
pp. 291-296(6)
Authors: Sarkar, S.; Singha, P. K.; Dey, S.; Mohanty, M.; Adhikari, B.

Preparation of Adrenochrome Hydrogel Patch, Gel, Ointment, and the Comparison of Their Blood Coagulating and Wound Healing Capability
pp. 297-301(5)
Authors: Mukherjee, D.; Banthia, A. K.

Fiber Pretreatment and Its Effects on Wood Fiber Reinforced Polypropylene Composites
pp. 303-307(5)
Authors: Beg, M.D.H.; Pickering, K.L.

Influence of Solution Temperature on Microstructure and Mechanical Properties of Two Cast Al–Si Alloys
pp. 309-314(6)
Authors: Sharma, Rajesh; Kumar, Anesh; Dwivedi, D. K.

Coinage Metals in the Nanometer Length Scale
pp. 315-317(3)
Author: Pal, Tarasankar

Sol-Gel Based Extrusion of Alumina Fibers
pp. 319-323(5)
Authors: Chandradass, J.; Balasubramanian, M.

Development of Porous Hydroxyapatite Scaffolds
pp. 325-328(4)
Authors: Pal, Kunal; Pal, S.

A Review of: “Beyond Equilibrium Thermodynamics”
pp. 329-329(1)
Author: Reitz, Wayne

A Review of: “Continuum Scale Simulation of Engineering Materials, Fundamentals – Microstructures – Process Applications”
pp. 331-331(1)
Author: Reitz, Wayne