Materials at High Temperatures

Observations of native oxides on ion beam polished heterogeneous Cr - Mo weld TEM foil specimens
pp. 259-263(5)
Authors: Dawson, Karl; Tatlock, Gordon J.

Measurement of Young's modulus of oxides at high temperature related to the oxidation study
pp. 264-268(5)
Authors: Saeki, Isao; Ohno, Takuto; Seto, Daigo; Sakai, Ofuyu; Sugiyama, Yusuke; Sato, Tadao; Yamauchi, Akira; Kurokawa, Kazuya; Takeda, Mikako; Onishi, Takashi A.

Oxide scale formation and morphology on austenitic stainless steel at medium annealing temperatures
pp. 269-273(5)
Authors: Green, G.; Higginson, R.L.

Evolution of the metal - oxide interface during the initial stage of the high temperature oxidation of ferritic stainless steels
pp. 274-278(5)
Authors: Issartel, Jérome; Martoia, Sébastien; Charlot, Frédéric; Parry, Valérie; Wouters, Yves; Galerie, Alain

The effect of alloying additions on the oxide morphologies of super-heater tubes at elevated temperatures
pp. 279-284(6)
Authors: Higginson, R.L.; Millar, L.; West, G.; Hulance, J.

Microstructural analysis of oxide layer formation in ferritic stainless steel interconnects
pp. 285-289(5)
Authors: Kim, Dong-Ik; Hong, Seung Hee; Phaniraj, Madakashira P.; Han, Heung Nam; Ahn, Jae-Pyoung; Cho, Young Whan

Review of factors affecting steam oxidation testing
pp. 290-296(7)
Authors: Fry, A.T.; Piedra, E.M.

Oxidation of Fe - Si alloys in CO₂ - H₂O atmospheres
pp. 297-301(5)
Authors: Li, Huan; Zhang, Jianqiang; Young, David J.

The influence of platinum on the oxidation and sodium sulfate induced hot corrosion of NiAl diffusion coatings
pp. 302-308(7)
Authors: Lai, H.; Knutsson, P.; Stiller, K.

Performance of thermal barrier coatings in industrial gas turbine conditions
pp. 309-314(6)
Authors: Seraffon, Maud; Simms, Nigel J.; Nicholls, John R.; Sumner, Joy; Nunn, John

The CaSO₄ phase in fully infiltrated electron-beam physical vapour deposited yttria stabilized zirconia top coats from engine hardware
pp. 315-323(9)
Authors: Braue, W.; Mechnich, P.; Peters, P.W.M.

Oxidation behaviour of TiAlYN/CrN and CrAlYN y CrN nanoscale multilayer coatings with Al₂O₃ topcoat deposited on γ-TiAl alloys
pp. 324-335(12)
Authors: Braun, R.; Lange, A.; Hovsepian, P.E.h.; Ehiasarian, A.P.; Tietema, R.; Leyens, C.

Oxygen influenced intergranular crack propagation: analysing microstructure and chemistry in the crack tip region
pp. 336-341(6)
Authors: Viskari, L.; Johansson, S.; Stiller, K.

High-temperature oxidation of FeCrAl(Y, Pt) alloys in oxygen - water vapour
pp. 342-348(7)
Author: Amano, Tadaaki

Photoelectrochemical investigations on individual ferritic and austenitic grains of a duplex stainless steel oxidized in water vapour
pp. 349-354(6)
Authors: Srisrual, A.; Petit, J.-P.; Wouters, Y.; Pascal, C.; Galerie, A.

Microscopical investigation of steamside oxide on X20CrMoV121 superheater tubes
pp. 355-360(6)
Authors: Montgomery, Melanie; Hansson, Anette N.; Jensen, Søren A.; Vilhelmsen, Tommy

Microstructural characterization of oxide scales formed on steels P91 and P92
pp. 361-368(8)
Authors: Mogire, E.O.; Higginson, R.L.; Fry, A.T.; Thomson, R.C.

High temperature oxidation and corrosion of gas turbine component materials in burner rig exposures
pp. 369-376(8)
Authors: Sumner, Joy; Encinas-Oropesa, Adriana; Simms, Nigel J.; Oakey, John E.

Scaling and internal oxidation of α-CuSn alloy
pp. 377-382(6)
Authors: Dubey, Megha N.; Jouen, Samuel; Sauvage, Xavier; Hannoyer, Béatrice