Home >> Materials at High Temperatures, Volume 26, Number 2
Materials at High Temperatures logo Science Reviews 2000 Ltd logo

Materials at High Temperatures serves the needs of those who develop and use materials for high temperature applications. It publishes peer reviewed contributions relating to high temperature applications in the power, chemical, engine, processing and furnace industries.

The effects of high temperatures on corrosion, fatigue, creep, strength and wear in alloys, intermetallics, ceramics, refractories and composites are covered. Papers dealing with aspects of materials usage including modelling of behaviour and life prediction will be particularly welcome. The journal has a policy of emphasizing practical aspects and authors presenting results from research programmes are encouraged to relate these, if possible, to actual or potential applications.

Publisher: Science Reviews 2000 Ltd

More about this publication?
Related content
Volume 26, Number 2, July 2009

< previous issue | all issues | next issue >

Morphological evolution of oxide scales grown on ferritic steels in steam
pp. 105-111(7)
Authors: Wright, Ian G.; Howe, Jane Y.; Sabau, Adrian S.

Microstructural investigation of the KCl-induced corrosion of the austenitic alloy Sanicro 28 (35Fe27Cr31Ni) at 600°C
pp. 113-125(13)
Authors: Proff, C.; Jonsson, T.; Pettersson, C.; Svensson, J.-E.; Johansson, L.-G.; Halvarsson, M.

Improvements in honeycomb abradable seals
pp. 127-135(9)
Authors: Potter, D.J.; Chai, Y.W.; Tatlock, G.J.

Microstructural investigation of the initial oxidation at 1450°C and 1500°C of a Mo(Si,Al)2-based composite
pp. 137-143(7)
Authors: Halvarsson, M.; Jonsson, T.; Ingemarsson, L.; Sundberg, M.; Svensson, J.-E.; Johansson, L.-G.

Oxidation behaviour and kinetics of α-SiAlON ceramics
pp. 145-151(7)
Authors: Corapcioglu, Gulcan; Kurama, Semra

Yttrium and oxygen distributions in MCrAlY coatings after deposition, annealing and oxidation
pp. 153-159(7)
Authors: Vergel, Serrano C.; Kwakernaak, C.; Nijdam, T.J.; Sloof, W.G.

Microstructural characterisation of oxide formation from MCrAlY coatings on nickel-based superalloys
pp. 161-168(8)
Authors: West, Geoff D.; Pace, Michael T.; Thomson, Rachel C.

Degradation of a C/CrC PVD coating after annealing in Ar+H2 at 700°C studied by Raman spectroscopy and transmission electron microscopy
pp. 169-176(8)
Authors: Zhou, Zhaoxia; Ross, Ian M.; Rainforth, Mark W.; Cavaleiro, Albano; Ehiassarian, Arutiun P.; Eh Hovsepian, Papken

Corrosion behaviour of amorphous Ni-Si thin films on AISI 304L stainless steel
pp. 177-186(10)
Authors: Tam, P.L.; Jelvestam, U.; Nyborg, L.

Adhesion of thermal barrier coatings systems after long term oxidation : influence of preoxidation temperature and surface state of the bond coat
pp. 187-194(8)
Authors: Chieux, Marion; Molins, Régine; Rémy, Luc; Duhamel, Cécilie; Cadoret, Yannick

Oxidation of a Zr-doped NiAl bondcoat thermochemically deposited on a nickel-based superalloy
pp. 195-198(4)
Authors: Hamadi, S.; Bacos, M.P.; Poulain, M.; Zanna, S.; Seyeux, A.; Maurice, V.; Marcus, P.

Oxidation of FeCrAl foils at 500-900°C in dry O2 and O2 with 40% H2O
pp. 199-210(12)
Authors: Engkvist, J.; Canovic, S.; Liu, F.; Götlind, H.; Svensson, J.-E.; Johansson, L.-G.; Olsson, M.; Halvarsson, M.

Factors affecting aluminum depletion during cyclic oxidation of Fe-base alumina-forming alloys
pp. 211-216(6)
Authors: Pint, B.A.; Walker, L.R.; Wright, I.G.

< previous issue | all issues | next issue >

Marked list

Key

Free Content
Free content
New Content
New content
Open Access Content
Open access content
Subscribed Content
Subscribed content
Free Trial Content
Free trial content

Text size:

A | A | A | A
^ Back to top
Share this item with others: These icons link to social bookmarking sites where readers can share and discover new web pages. print icon Print this page