Materials at High Temperatures

Phase identification of oxide scale on low carbon steel
pp. 179-184(6)
Authors: Birosca, S.; Higginson, R.L.

In-situ scanning electron microscopy and electron backscatter diffraction investigation on the oxidation of pure iron
pp. 185-193(9)
Authors: Pöter, B.; Parezanović, I.; Spiegel, M.

The use of EBSD to study the microstructural development of oxide scales on 316 stainless steel
pp. 195-200(6)
Authors: Jepson, M.; Higginson, R.L.

Characterisation of high temperature oxidation using electron backscatter diffraction
pp. 201-205(5)
Authors: West, G.D.; R.L.Higginson,

Studying the role of the alloy-grain-boundary character during oxidation of Ni-base alloys by means of the electron back-scattered diffraction technique
pp. 207-212(6)
Authors: Trindade, V.B.; Krupp, U.; Wagenhuber, Ph. E.-G.; Virkar, Y.M.; Christ, H.-J.

Effect of water vapour on growth and adherence of chromia scales formed on Cr in high and low pO₂-environments at 1000 and 1050°C
pp. 213-221(9)
Authors: Michalik, M.; Hänsel, M.; Jurek, J.; Singheiser, L.; Quadakkers, W.J.

Influence of the oxidation environment on scale morphology and oxidation rate of Fe-22Cr
pp. 223-229(7)
Authors: Hansson, Anette N.; Somers, Marcel A.J.

Microstructural investigation of the effect of water vapour on the oxidation of alloy 353 MA in oxygen at 700 and 900°C
pp. 231-243(13)
Authors: Jonsson, T.; Canovic, S.; Liu, F.; Asteman, H.; Svensson, J.-E.; Johansson, L.-G.; Halvarsson, M.

Oxidation of potential SOFC interconnect materials, Crofer 22 APU and Avesta 353 MA, in dry and humid air studied in situ by X-ray diffraction
pp. 245-251(7)
Authors: Garcia-Vargas, Maria Jose; Lelait, Laurent; Kolarik, Vladislav; Fietzek, Harald; Jues-Lorenzo, Maria del Mar

Effect of component thickness on lifetime and oxidation rate of chromia forming ferritic steels in low and high pO₂ environments
pp. 253-262(10)
Authors: Huszkowski, P.; Ertl, S.; Piron-Abellan, J.; Christiansen, N.; Höfler, T.; Shemet, V.; Singheiser, L.; Quadakkers, W.J.

Long term steam oxidation of TP 347H FG in power plants
pp. 263-2670(2408)
Authors: Hansson, A.N.; Korcakova, L.; Hald, J.; Montgomery, M.

Role of nickel in the oxidation of Fe-Cr-Ni alloys in air-water vapour atmospheres
pp. 269-281(13)
Authors: Pettersson, R.F.A.; Enecker, J.; Liu, L.

Oxidation mechanisms of low energy-high flux nitrided ODS FeAl intermetallic alloy
pp. 283-286(4)
Authors: Pedraza, F.; Grosseau-Poussard, G.L.; Dinhut, J.F.

Effect of the chromium content on the corrosion of nickel based alloys in primary water of pressurised nuclear reactors
pp. 287-292(6)
Authors: Delabrouille, F.; Viguier, B.; Legras, L.; Andrieu, E.

High temperature oxidation behavior of a Mo-3Si-1B(wt%) alloy
pp. 293-307(15)
Authors: Helmick, D.A.; Meier, G.H.; Pettit, F.S.

The halogen effect for improving the oxidation resistance of TiAl-alloys
pp. 309-314(6)
Authors: Donchev, A.; Zschau, H.-E.; Schütze, M.

Photoelectrochemical and Raman imaging studies of chemical and mechanical properties of thermally grown titanium oxide scales
pp. 315-320(6)
Authors: Wouters, Y.; Galerie, A.; Bouvier, P.; Mermoux, M.; Petit, J.-P.

Effects of Pt on the short-term oxidation behavior of γ-Ni+γ′-Ni₃Al alloys
pp. 321-328(8)
Authors: Hayashi, Shigenari; Gleeson, Brian

Influence of nano-particle size on the oxidation behaviour of Al, Fe and Cu
pp. 329-333(5)
Authors: Eisenreich, N.; Fietzek, H.; Juez-Lorenzo, M.; Kolarik, V.; Weiser, V.; Koleczko, A.

Effect of impurities on the oxidation mechanism of nickel at 800°C
pp. 335-342(8)
Authors: Molins, Régine; Andrieux, Michel; Huntz, Anne-Marie

Selective oxidation and segregation during annealing of steels at low oxygen partial pressures
pp. 343-349(7)
Authors: Spiegel, M.; Parezanović, I.

Microstructural characterization of a carbonitrided heat resisting alloy using focused ion beam-based techniques
pp. 351-358(8)
Authors: Ford, S.; Young, D.J.; McGrouther, D.; Munroe, P.R.

Study of sulfur distribution in a NiPtAl bondcoat
pp. 359-366(8)
Authors: Molins, Régine; Rouzou, Isabelle; Rémy, Luc; Le Biavant-Guerrier, Kristell; Jomard, François

Oxidation behaviour and phase stability at and above 700°C in brazed areas of metal-supported automotive converters with honeycomb structures made of ultra-thin FeCrAlRE materials for diesel applications
pp. 367-374(8)
Authors: Bode, Hans; Gao, Wei

Concentration dependence of the ternary interdiffusivities in the Fe-Cr-Al System at 1100°C: experimental and simulation studies
pp. 375-384(10)
Authors: Dawah-Tankeu, P.; Dörer, L.; Borchardt, G.; Gömann, K.; Pragnell, W.M.; Evans, H.E.; Le Coze, J.

Application of thermography in the evaluation of early signs of failure of thermal barrier coating systems
pp. 385-392(8)
Authors: Nunn, John; Saunders, Stuart; Banks, Jim

Analytical electron microscopy of the mixed zone in NiCoCrAlY-based EB-PVD thermal barrier coatings: as-coated condition versus late stages of TBC lifetime
pp. 393-401(9)
Authors: Braue, W.; Schulz, U.; Fritscher, K.; Keyens, C.; Wirth, R.

Oxidation of an inward grown aluminide diffusion coating studied using SEM and TEM
pp. 403-410(8)
Authors: Svensson, H.; Stiller, K.

Performance and thermal stability of Pt-modified Al-diffusion coatings for superalloys under cyclic and isothermal conditions
pp. 411-420(10)
Authors: Littner, A.; Pedraza, F.; Kennedy, A.D.; Moretto, P.; Peichl, L.; Weber, T.; Schuetze, M.

Focused ion beam assisted analysis of the oxidation of a NiAl coating on pure Ni
pp. 421-426(6)
Authors: Reid, M.; Pomeroy, M.J.; Vokal, V.; Tanner, D.A.

Fracture and adhesion of coatings for use in steam environments
pp. 427-431(5)
Authors: Osgerby, S.; Brown, L.J.

An oxidation study of an MCrAlY overlay coating
pp. 433-436(4)
Author: Taylor, M.P.

Protective coatings on orthorhombic Ti₂AlNb alloys
pp. 437-447(11)
Authors: Braun, R.; Leyens, C.

Plasma-sprayed coatings for oxidation protection on creep of the Ti-6Al-4V alloy
pp. 449-452(4)
Authors: Reis, D.A.P.; Silva, C.R.M.; Nono, M.C.A.; Barboza, M.J.R.; Piorino-Neto, F.; Perez, E.A.C.

FEG-SEM examination of alumina scales formed on FeCrAl alloys
pp. 453-460(8)
Authors: Al-Badairy, H.; Prior, D.J.; Tatlock, G.J.

Effect of carbon content on the oxidation behaviour of FeCrAlY alloys in the temperature range 1200-1300°C
pp. 461-466(6)
Authors: Kochubey, V.; Al Badairy, H.; Le Coze, J.; Naumenko, D.; Tatlock, G.J.; Wessel, E.; Quadakkers, W.J.

Characterisation studies of chromia formation on commercial FeCrAlRE alloy foils following chemically induced failure at 900°C
pp. 467-472(6)
Authors: Tatlock, G.J.; Al-Badairy, H.; Bennett, M.J.; Nicholls, J.R.

Adherence of alumina scale formed on Fe-20Cr-4Al alloys with noble metals (Pd, Pt)
pp. 473-480(8)
Authors: Amano, T.; Okazaki, M.; Takeuchi, K.; Shishido, T.

Oxidation microstructure of iron aluminides
pp. 481-484(4)
Authors: Martinez, M.; Viguier, B.; Maugis, P.; Lacaze, J.

Local and microstructure-related effects affecting the high temperature oxidation of alumina formers: a brief survey
pp. 485-495(11)
Author: Jedlinski, J.

Segregation of reactive elements at oxide grain boundaries in FeCrAlRE alloys
pp. 497-503(7)
Authors: Ram, D.L.; Tatlock, G.J.; Falke, U.

On the application of SIMS to study the oxidation mechanisms of alumina formers
pp. 505-519(15)
Authors: Jedlinski, J.; Bernasik, A.; Kowalski, K.; Nocun, M.

TEM investigation of the oxide scales formed on a FeCrAlRE alloy (Kanthal AF) at 900°C in dry O₂ and O₂ with 40% H₂O
pp. 521-526(6)
Authors: Liu, Fang; Liu, Helena; Josefsson, Helena; Svensson, Jan-Erik; Johansson, Lars-Gunnar; Halvarsson, Mats

Which tool to distinguish transient alumina from alpha alumina in thermally grown alumina scales?
pp. 527-534(8)
Authors: Chevalier, S.; Molins, R.; Heintz, O.; Larpin, J.P.

Stress development and relaxation in Al₂O₃ during early stage oxidation of β-NiAl
pp. 535-543(9)
Authors: Hou, P.Y.; Paulikas, A.P.; Veal, B.W.

TEM analysis of the growth of oxide scales at different temperatures in FeAl grade 3 intermetallic alloy
pp. 545-549(5)
Authors: Pedraza, F.; Grosseau-Poussard, J.L.; Dinhut, J.F.

The role of transient oxides during deposition and thermal cycling of thermal barrier coatings
pp. 551-559(9)
Authors: Nijdam, T.J.; Sloof, W.G.

Aluminium depletion in FeCrAlY steel during transitional alumina formation
pp. 561-566(6)
Authors: Pragnell, W.M.; Evans, H.E.; Naumenko, D.; Quadakkers, W.J.

Initial oxidation of Fe-Cr alloys: in situ STM and ex situ SEM observation
pp. 567-573(7)
Authors: Park, Eungyeul; Hüning, Boris; Borodin, Sergiy; Rohwerder, Michael; Spiegel, Michael