Materials at High Temperatures

Formation of diffusion cells in LPPS MCrAlY coatings
pp. 461-465(5)
Authors: Taylor, M.P.; Evans, H.E.

Microstructural stability of a Ni-Pt-Al coating on CMSX-10 alloy at 950 and 1100°C
pp. 467-474(8)
Authors: Reid, M.; Pomeroy, M.J.; Robinson, J.S.

Oxidation and lifetime of PYSZ and CeSZ coated Ni-base substrates with MCrAlY bond layers
pp. 475-479(5)
Authors: Leyens, C.; Schulz, U.; Fritscher, K.

Alumina scale growth and degradation modes of a TBC system
pp. 481-485(5)
Authors: Guerre, Catherine; Rémy, Luc; Molins, Régine

Residual stress measurement by Piezospectroscopy of cross sections through thermal barrier coatings
pp. 487-493(7)
Authors: Selçuk, A.; Atkinson, A.

Microstructural characterization of the failures of thermal barrier coatings on Ni-base superalloys
pp. 495-506(12)
Authors: Yanar, N.M.; Kim, G.; Hamano, S.; Pettit, F.S.; Meier, G.H.

Failure morphologies of cyclically oxidized ZrO₂-based thermal barrier coatings
pp. 507-517(11)
Authors: Nesbitt, James A.; Zhu, Dongming; Miller, Robert A.; Barrett, Charles A.

Development of oxides at TBC - bond coat interfaces in burner rig exposures
pp. 519-526(8)
Authors: Simms, N.J.; Kilgallon, P.J.; Roach, C.; Oakey, J.E.

The role of cementite in the metal dusting of Fe-Cr and Fe-Ni-Cr Alloys
pp. 527-534(8)
Authors: Toh, C.H.; Munroe, P.R.; Young, D.J.

Carbon deposition on stainless steel in oxidising environments
pp. 535-541(7)
Authors: Millward, G.R.; Evans, H.E.; Jones, I.P.; Eley, C.D.

Microscopic observations of both sides of scale-substrate interfaces after adhesion measurements of chromia-rich scales on ferritic stainless steels using the inverted blister test
pp. 543-550(8)
Authors: Toscan, F.; Antoni, L.; Dupeux, M.; Galerie, A.

In situ ESEM investigations of the oxide growth on hot work tools steel: effect of the water vapour
pp. 551-560(10)
Authors: Bruckel, P.; Lours, P.; Lamesie, P.; Pieraggi, B.

Simulation of road salt corrosion in austenitic alloys for automotive exhaust systems
pp. 561-571(11)
Authors: Antoni, L.; Bousquet, R.; Davidson, J.H.

TEM investigations of intergranular stress corrosion cracking in austenitic alloys in PWR environmental conditions
pp. 573-579(7)
Authors: Lozano-Perez, S.; Titchmarsh, J.M.

Analysis and TEM examinations of corrosion scales grown on alloy 690 exposed to PWR environment
pp. 581-591(11)
Authors: Carrette, F.; Lafont, M.C.; Legras, L.; Guinard, L.; Pieraggi, B.

Oxide microstructure and deuterium ingress in Zr-2.5Nb CANDU® pressure tubes
pp. 593-600(8)
Authors: Woo, O.T.; Lin, Y.P.; Khatamian, D.

Complex oxide structures formed by oxidation of Ag(100) and Ag(111) by hyperthermal atomic oxygen
pp. 601-606(6)
Authors: Li, Long; Yang, Judith C.

Oxidation of orthorhombic Ti₂AlNb alloys in the temperature range 550-1000°C in air
pp. 607-629(23)
Authors: Ralison, A.; Dettenwanger, F.; Schütze, M.

Transient oxidation of alumina forming Ti-Al-Ag-based alloys and coatings studied by SEM, AFM, XPS and LRS
pp. 631-637(7)
Authors: Niewolak, L.; Lawson, K.; Roßbach, P.; Wessel, E.; Shemer, V.; Nicholls, J.R.; Singheiser, L.; Quadakkers, W.J.

Stress and oxidation of nickel according to its purity
pp. 639-648(10)
Authors: Huntz, A.M.; Lefeuvre, A.; Andrieux, M.; Sévérac, C.; Moulin, G.; Molins, R.; Jomard, F.

High temperature oxidation of high purity nickel: oxide scale morphology and growth kinetics
pp. 649-655(7)
Authors: Peraldi, Raphaëlle; Monceau, Daniel; Jean, Sylvain; Pieraggi, Bernard