Authors: Everall, Neil; Chalmers, John; Mills, Peter

Source: Applied Spectroscopy, Volume 50, Issue 10, Pages 12A-30A and 1221-1337 (October 1996) , pp. 1229-1234(6)

Publisher: Society for Applied Spectroscopy

Abstract:

The linear diphenyl polyene Φ-(C=C-)₄Φ has been investigated as a resonant Raman-active probe for molecular orientation, suitable for incorporation into polymers prior to melt extrusion and drawing. By examination of the polarization properties of the Raman scattered radiation, it is possible to determine the P₂₀₀ and P₄₀₀ orientation parameters for the dye molecule as a function of draw ratio. Assuming that the dye resides only in amorphous polymer regions, it is expected that the data will give insight into the orienting forces present in the amorphous phase during processing. Expressions were derived relating P₂₀₀ and P₄₀₀ to the polarized Raman intensities. An expression for Hermans' orientation parameter was also derived—it was shown that f was always slightly higher than P₂₀₀ when evaluated from the same Raman data. These Raman measurements were illustrated by using the example of uniaxially drawn poly(ethylene) (PE) tubing. As an alternative approach, FT-IR dichroic ratios of bands due to the PE itself were used to determine the orientation (P₂₀₀) of the crystalline phase and also of gauche conformers present only in the amorphous phase; these results were compared with the Raman measurements on the dye probe. The orientation was examined as a function of draw ratio and subsequent thermal annealing. In general, both crystalline and amorphous phases oriented increasingly with draw ratio, but whereas annealing the samples only slightly relaxed the crystal orientation, the amorphous orientation decreased dramatically when measured by using either the probe molecule or the gauche conformer as a probe of the amorphous phase. This result supports the assumption that the dye is localized in amorphous regions. This work is important since it shows how a cheap, commercially available probe molecule may be used to probe the amorphous-phase orientation of a polymer without requiring any chemical synthesis; simple melt-mixing is sufficient to dope the amorphous network. This capability will be useful for systems where convenient vibrational bands specific to the polymer amorphous phase are absent.

Keywords: Raman; Resonance Raman probe; FT-IR; Poly(ethylene); Polymer; Orientation; Dichroic

Document Type: Research article

DOI: http://dx.doi.org/10.1366/0003702963904971

Affiliations: 1: ICI plc, Research and Technology Centre, Wilton, Middlesbrough, Cleveland, TS90 8JE, England, U.K.

Publication date: 1996-10-01

More about this publication?

• The Society publishes the internationally recognized, peer reviewed journal, Applied Spectroscopy, which is available both in print and online. Subscriptions are included with membership or can be purchased by institutional or corporate organizations. Abstracts may be viewed free of charge.
  
  Previously published as Bulletin (Society for Applied Spectroscopy)
• Editorial Board
• Information for Authors
• Submit a Paper
• Subscribe to this Title
• Membership Information
• Request copyrighted SAS materials
• Spectroscopic Nomenclature
• Focus Compendium
• ingentaconnect is not responsible for the content or availability of external websites

Related content

• In this: publication
• By this: publisher
• In this Subject: Analytical Chemistry
• By this author: Everall, Neil ;  Chalmers, John ;  Mills, Peter

Website © Publishing Technology. Article copyright remains with the publisher, society or author(s) as specified within the article.

• Terms and conditions
• Privacy policy
• Information for advertisers