Canadian Journal of Civil Engineering

Stabilization of the phosphatic wastes using high calcium ash in Jordan
pp. 1193-1199(7)
Author: Abdel Hadi, Nafeth A.b.d.e.l.R.a.h.m.a.n.M.

Sectional mapping of local roads in Spain
pp. 1200-1209(10)
Authors: Ibeas, Angel; Gonzalo_Orden, Hernan; Dell'Olio, Luigi; Moura, Jose L.

Mitigating effect of chloride ions on sulfate attack of cement mortars with or without silica fume
pp. 1210-1220(11)
Authors: Lee, Seung-Tae; Park, Dae-Wook; Ann, Ki-Yong

Experimental evaluation of the compressive resistance of non-stress-relieved solid round steel columns
pp. 1221-1238(18)
Authors: Saliba, M.; Al-Hashimy, M.; Wahba, J.; Sennah, K.

Assessment of two a posteriori error estimators for elasticity problems
pp. 1239-1250(12)
Authors: ElSheikh, A. H.; Chidiac, S. E.; Smith, S.

Impact resonance method for damage detection in carbon-fibre-reinforced polymer-strengthened reinforced concrete beams subjected to fatigue and thermal cycling
pp. 1251-1260(10)
Authors: Ward, C.; Rattanawangcharoen, N.; Gheorghiu, C.

Deicing salt scaling resistance of concrete incorporating supplementary cementing materials: laboratory and field test data
pp. 1261-1275(15)
Authors: Bilodeau, A.; Fournier, B.; Hooton, R. D.; Gagné, R.; Jolin, M.; Bouzoubaâ, N.

Internal curing of mortars by lightweight aggregates and its effects on hydration
pp. 1276-1284(9)
Authors: Tasdemir, Mehmet A.; Akcay, Burcu

Flow resistance in large-scale roughness condition
pp. 1285-1293(9)
Authors: Das, Rajib; Carnacina, Iacopo; Pagliara, Stefano

Effect of overloading on fatigue performance of reinforced concrete beams strengthened with externally post-tensioned carbon-fibre-reinforced polymer tendons
pp. 1294-1307(14)
Authors: Elrefai, Ahmed; West, Jeffrey S.; Soudki, Khaled A.

Laboratory characterization of recycled crumb-rubber-modified asphalt mixture after extended aging
pp. 1308-1317(10)
Authors: Kim, Hakseo; Akisetty, Chandra K.; Amirkhanian, Serji N.; Lee, Soon-Jae

Experimental study on slotted rectangular and square hollow structural section (HSS) tension connections
pp. 1318-1330(13)
Authors: Huang, R. F.; Khoo, H. A.; Cheng, J. J.R.; Zhao, R. G.

Applicability of flash laser distance and ranging to three-dimensional spatial information acquisition and modeling on a construction site
pp. 1331-1341(11)
Authors: Kim, Changwan; Son, Hyojoo; Kim, Hyoungkwan; Han, Seung H.

Geographic information system-based visualization system for planning and monitoring of repetitive construction projects
pp. 1342-1346(5)
Authors: Sonmez, Rifat; Uysal, Furkan

Discussion of “Jet impact geometry and plunge pool dimensions effects on dynamic pressures at pool sidewalls”
pp. 1347-1348(2)
Author: Bollaert, E.F.R.

Discussion of “Jet impact geometry and plunge pool dimensions effects on dynamic pressures at pool sidewalls”
pp. 1349-1350(2)
Author: Schleiss, Anton J.

Reply to discussions by E.F.R. Bollaert and A.J. Schleiss on “Jet impact geometry and plunge pool dimensions effects on dynamic pressures at pool sidewalls”
pp. 1351-1351(1)
Authors: Borghei, S. M.; Zarnani, P.

Erratum: Discussion of “Proposals for limit states torsional strength design of wide-flange steel members”
pp. 1352-1352(1)
Author: Bedair, Osama