Science and Technology of Welding & Joining

Volume 14, Number 8, November 2009

Links for this Journal

• http://www.ingentaconnect.com/content/maney/stwj/2009/00000014/00000008
• Ingenta Connect ISSN
• Open URL

Articles

Structural and chemical evolution of super duplex stainless steel on activated tungsten inert gas welding process
pp. 681-690(10)
Authors: Berthier, A.; Paillard, P.; Christien, F.

Links for this article

• http://www.ingentaconnect.com/content/maney/stwj/2009/00000014/00000008/art00001
• http://openurl.ingenta.com/content?genre=article&issn=1362-1718&volume=14&issue=8&spage=681&epage=690
• http://dx.doi.org/10.1179/136217109X449184

Mechanical properties and microstructures of magnesium alloy AZ31B joint fabricated by resistance spot welding with cover plates
pp. 691-697(7)
Authors: Qiu, R.F.; Satonaka, S.; Iwamoto, C.

Links for this article

• http://www.ingentaconnect.com/content/maney/stwj/2009/00000014/00000008/art00002
• http://openurl.ingenta.com/content?genre=article&issn=1362-1718&volume=14&issue=8&spage=691&epage=697
• http://dx.doi.org/10.1179/136217108X365313

Ferrite to austenite reverse transformation process in B containing 9%Cr heat resistant steel HAZ
pp. 698-707(10)
Authors: Shirane, T.; Tsukamoto, S.; Tsuzaki, K.; Adachi, Y.; Hanamura, T.; Shimizu, M.; Abe, F.

Links for this article

• http://www.ingentaconnect.com/content/maney/stwj/2009/00000014/00000008/art00003
• http://openurl.ingenta.com/content?genre=article&issn=1362-1718&volume=14&issue=8&spage=698&epage=707
• http://dx.doi.org/10.1179/136217109X12505932584853

Spatter reduction in gas metal arc welding of stainless steel sheets using controlled bridge transfer process
pp. 708-716(9)
Authors: Era, T.; Ueyama, T.; Hirata, Y.

Links for this article

• http://www.ingentaconnect.com/content/maney/stwj/2009/00000014/00000008/art00004
• http://openurl.ingenta.com/content?genre=article&issn=1362-1718&volume=14&issue=8&spage=708&epage=716
• http://dx.doi.org/10.1179/136217109X12518083193595

Welding process impact on residual stress and distortion
pp. 717-725(9)
Authors: Colegrove, P.; Ikeagu, C.; Thistlethwaite, A.; Williams, S.; Nagy, T.; Suder, W.; Steuwer, A.; Pirling, T.

Links for this article

• http://www.ingentaconnect.com/content/maney/stwj/2009/00000014/00000008/art00005
• http://openurl.ingenta.com/content?genre=article&issn=1362-1718&volume=14&issue=8&spage=717&epage=725
• http://dx.doi.org/10.1179/136217109X406938

Weld shape variation and electrode protection under Ar-(Ar-O₂) double shielded GTA welding
pp. 726-733(8)
Authors: Lu, S.P.; Fujii, H.; Nogi, K.

Links for this article

• http://www.ingentaconnect.com/content/maney/stwj/2009/00000014/00000008/art00006
• http://openurl.ingenta.com/content?genre=article&issn=1362-1718&volume=14&issue=8&spage=726&epage=733
• http://dx.doi.org/10.1179/136217109X412391

Control of weld composition when welding high strength aluminium alloy using the tandem process
pp. 734-739(6)
Authors: Pickin, C.G.; Williams, S.W.; Prangnell, P.B.; Robson, J.; Lunt, M.

Links for this article

• http://www.ingentaconnect.com/content/maney/stwj/2009/00000014/00000008/art00007
• http://openurl.ingenta.com/content?genre=article&issn=1362-1718&volume=14&issue=8&spage=734&epage=739
• http://dx.doi.org/10.1179/136217109X12505932584817

Review

Development of low spatter CO₂ arc welding process with high frequency pulse current
pp. 740-746(7)
Authors: Tokihiko, K.; Rinsei, I.; Koichi, Y.; Yoshinori, H.

Links for this article

• http://www.ingentaconnect.com/content/maney/stwj/2009/00000014/00000008/art00008
• http://openurl.ingenta.com/content?genre=article&issn=1362-1718&volume=14&issue=8&spage=740&epage=746
• http://dx.doi.org/10.1179/136217109X449238

Articles

Tool design and stir zone grain size in AZ31 friction stir spot welds
pp. 747-752(6)
Authors: Sun, N.; Yin, Y.H.; Gerlich, A.P.; North, T.H.

Links for this article

• http://www.ingentaconnect.com/content/maney/stwj/2009/00000014/00000008/art00009
• http://openurl.ingenta.com/content?genre=article&issn=1362-1718&volume=14&issue=8&spage=747&epage=752
• http://dx.doi.org/10.1179/136217109X12518083193559

New technique to control welding buckling distortion and residual stress with non-contact electromagnetic impact
pp. 753-759(7)
Authors: Xu, D.; Liu, X.S.; Wang, P.; Yang, J.G.; Fang, H.Y.

Links for this article

• http://www.ingentaconnect.com/content/maney/stwj/2009/00000014/00000008/art00010
• http://openurl.ingenta.com/content?genre=article&issn=1362-1718&volume=14&issue=8&spage=753&epage=759
• http://dx.doi.org/10.1179/136217109X12505932584736

Metal transfer characteristics of rotating arc narrow gap horizontal GMAW
pp. 760-764(5)
Authors: Guo, N.; Lin, S.B.; Zhang, L.; Yang, C.L.

Links for this article

• http://www.ingentaconnect.com/content/maney/stwj/2009/00000014/00000008/art00011
• http://openurl.ingenta.com/content?genre=article&issn=1362-1718&volume=14&issue=8&spage=760&epage=764
• http://dx.doi.org/10.1179/136217109X12505932584655

Rapid Communication

Penetration increase of AISI 304 using ultrasonic assisted tungsten inert gas welding
pp. 765-767(3)
Authors: Sun, Q.J.; Lin, S.B.; Yang, C.L.; Zhao, G.Q.

Links for this article

• http://www.ingentaconnect.com/content/maney/stwj/2009/00000014/00000008/art00012
• http://openurl.ingenta.com/content?genre=article&issn=1362-1718&volume=14&issue=8&spage=765&epage=767
• http://dx.doi.org/10.1179/136217109X12505932584772