Science and Technology of Welding & Joining

Hot cracking in laser braze joint of high strength stainless steel using gold brazing filler metal - prevention of hot cracking by controlling thermal cycle
pp. 254-261(8)
Authors: Saida, K.; Sakatani, T.; Song, W.; Nishimoto, K.

Metal transfer instability in gas metal arc welding
pp. 262-273(12)
Author: Simpson, S.W.

Study of laser MIG hybrid welded AZ31 magnesium alloy
pp. 274-281(8)
Authors: Gao, M.; Zeng, X.Y.; Tan, B.; Feng, J.C.

Effect of initial base metal temper on mechanical properties in AA7050 friction stir welds
pp. 282-287(6)
Authors: Yan, J.; Reynolds, A.P.

High quality welding of stainless steel with 10 kW high power fibre laser
pp. 288-294(7)
Authors: Kawahito, Y.; Mizutani, M.; Katayama, S.

Electrode worksheet interface behaviour during resistance spot welding of Al alloy 5182
pp. 295-304(10)
Authors: Rashid, M.; Medley, J.B.; Zhou, Y.

Solution to problems of arc interruption and arc length control in tandem pulsed gas metal arc welding
pp. 305-314(10)
Authors: Ueyama, T.; Uezono, T.; Era, T.; Tanaka, M.; Nakata, K.

Effect of activating flux and shielding gas on microstructure of TIG welds in austenitic stainless steel
pp. 315-320(6)
Authors: Loureiro, A.R.; Costa, B.F.O.; Batista, A.C.; Rodrigues, A.

Novel modelling approach to optimisation of welding conditions and heat treatment schedules for age hardening Al alloys
pp. 321-332(12)
Authors: Myhr, O.R.; Grong, .

Development of efficient numerical heat transfer model coupled with genetic algorithm based optimisation for prediction of process variables in GTA spot welding
pp. 333-345(13)
Authors: Bag, S.; De, A.

Influence of process parameters on microstructural evolution and mechanical properties in friction stirred Al-2024 (T3) alloy
pp. 346-355(10)
Authors: Dixit, V.; Mishra, R.S.; Lederich, R.J.; Talwar, R.

Effects of surface conditions on resistance spot welding of Mg alloy AZ31
pp. 356-361(6)
Authors: Liu, L.; Zhou, S.Q.; Tian, Y.H.; Feng, J.C.; Jung, J.P.; Zhou, Y.N.

Laser droplet welding of zinc coated steel sheets
pp. 362-368(7)
Authors: Jerič, A.; Grabec, I.; Govekar, E.

Influence of clamping on distortion of welded S355 T-joints
pp. 369-375(7)
Authors: Schenk, T.; Richardson, I.M.; Kraska, M.; Ohnimus, S.

Study of process/structure/property relationships in friction stir welded thin sheet Al-Cu-Li alloy
pp. 376-387(12)
Authors: Shukla, A.K.; Baeslack, W.A.