Science and Technology of Welding & Joining

Angular distortion of fillet welded T joint using low transformation temperature welding wire
pp. 97-105(9)
Authors: Mikami, Y.; Morikage, Y.; Mochizuki, M.; Toyoda, M.

Estimate of maximum pore size in keyhole laser welding of carbon steel
pp. 106-116(11)
Authors: Beretta, S.; Previtali, B.

Artificial neural networks and acoustic emission applied to stability analysis in gas metal arc welding
pp. 117-124(8)
Authors: Roca, A. Sánchez; Fals, H.C.; Fernández, J.B.; Macías, E.J.; de la Parte, M. P.

Metallographic and OIM study of weld cracking in GTA weld build-up of polycrystalline, directionally solidified and single crystal Ni based superalloys
pp. 125-131(7)
Authors: Sidhu, R.K.; Ojo, O.A.; Richards, N.L.; Chaturvedi, M.C.

Unsteady interfacial phenomena during inward weld pool flow with an active surface oxide
pp. 132-140(9)
Authors: Zhao, C.X.; van Steijn, V.; Richardson, I.M.; Kleijn, C.R.; Kenjeres, S.; Saldi, Z.

Process forces during friction stir welding of aluminium alloys
pp. 141-145(5)
Authors: Balasubramanian, N.; Gattu, B.; Mishra, R.S.

Parametric approach to positional fault detection in short arc welding
pp. 146-151(6)
Authors: Li, X.; Simpson, S.W.

Non-isothermal thermomechanical metallurgical model and its application to welding simulations
pp. 152-160(9)
Authors: Schenk, T.; Richardson, I.M.; Kraska, M.; Ohnimus, S.

Characterisation of solidification cracking in pulsed Nd:YAG laser welding of 2024 aluminium alloy
pp. 161-165(5)
Authors: Sheikhi, M.; Malek Ghaini, F.; Torkamany, M.J.; Sabbaghzadeh, J.

Measurement of residual stresses in austenitic stainless steel weld joints using ultrasonic technique
pp. 166-171(6)
Authors: Palanichamy, P.; Vasudevan, M.; Jayakumar, T.

Application of rotating arc system to horizontal narrow gap welding
pp. 172-177(6)
Authors: Yang, C.L.; Guo, N.; Lin, S.B.; Fan, C.L.; Zhang, Y.Q.

Improved process stability during friction stir welding of 5 cm thick copper canisters through shoulder geometry and parameter studies
pp. 178-184(7)
Authors: Cederqvist, L.; Sorensen, C.D.; Reynolds, A.P.; Öberg, T.

Residual stress engineering in friction stir welds by roller tensioning
pp. 185-192(8)
Authors: Altenkirch, J.; Steuwer, A.; Withers, P.J.; Williams, S.W.; Poad, M.; Wen, S.W.