Science and Technology of Welding & Joining

Qualitative study of bimetallic joints produced by solid state welding process
pp. 679-682(4)
Authors: Kong, T.F.; Chan, L.C.; Lee, T.C.

Numerical simulation of heat transfer and fluid flow in GTA/Laser hybrid welding
pp. 683-693(11)
Authors: Ribic, B.; Rai, R.; DebRoy, T.

Effect of adding materials on fume formation rate of lime titania type flux cored wire
pp. 694-697(4)
Authors: Li, X.B.; Jiang, J.M.; Wang, Z.H.; Wu, Y.L.; He, D.Y.; Xu, D.L.; Yang, J.P.

Effects of welding parameters on microstructure and mechanical properties of resistance spot welded magnesium alloy joints
pp. 698-704(7)
Authors: Lang, B.; Sun, D.Q.; Li, G.Z.; Qin, X.F.

Simplified method for establishing constitutive equations and flow stress data for welding stress modelling
pp. 705-713(9)
Authors: Aarbogh, H.M.; M'Hamdi, M.; Mo, A.; Fjær, H.G.

Friction stir welding of aluminium 7136-T76511 extrusions
pp. 714-720(7)
Authors: Hamilton, C.; Dymek, S.; Kalemba, I.; Blicharski, M.

Distribution of metals between inhalable and respirable fractions of welding fumes generated in gas metal arc welding
pp. 721-725(5)
Authors: Berlinger, B.; Náray, M.; Záray, G.

Experimental investigation of fatigue performance of spot welded dual phase sheet steels
pp. 726-731(6)
Authors: Xu, J.; Zhang, Y.S.; Xinmin, Lai; Chen, G.L.

Effect of crystallographic anisotropy of β-tin grains on thermal fatigue properties of Sn-1Ag-0˙5Cu and Sn-3Ag-0˙5Cu lead free solder interconnects
pp. 732-738(7)
Authors: Terashima, S.; Kobayashi, T.; Tanaka, M.

Novel method for quantitative assessment of slag detachability in austenitic stainless steels welds made by SMAW
pp. 739-743(5)
Authors: Nagaraju, S.; Rajadurai, A.; Vasudevan, M.; Menaka, M.; Subbaratnam, R.

Characterisation of plasma induced during high power fibre laser welding of stainless steel
pp. 744-748(5)
Authors: Kawahito, Y.; Matsumoto, N.; Mizutani, M.; Katayama, S.

Effect of weakly ionised plasma on penetration of stainless steel weld produced with ultra high power density fibre laser
pp. 749-753(5)
Authors: Kawahito, Y.; Kinoshita, K.; Matsumoto, N.; Mizutani, M.; Katayama, S.

Joint strength and failure mechanism of laser spot weld of mild steel sheets under lap shear loading
pp. 754-759(6)
Authors: Tao, W.; Li, L.Q.; Chen, Y.B.; Wu, L.

Vibration assisted brazing of SiC_p/A356 composites: microstructure and mechanical behaviour
pp. 760-764(5)
Authors: Yan, J.C.; Xu, H.B.; Shi, L.; Wang, X.L.; Yang, S.Q.

Interfacial structure and mechanical properties of hot roll bonded joints between titanium alloy and stainless steel using copper interlayer
pp. 765-768(4)
Authors: Zhao, D.S.; Yan, J.C.; Wang, C.W.; Wang, Y.; Yang, S.Q.

Influence of microstructure and weld size on the mechanical behaviour of dissimilar AHSS resistance spot welds
pp. 769-776(8)
Authors: Hernandez, Baltazar V.H.; Kuntz, M.L.; Khan, M.I.; Zhou, Y.

Study on metal transfer modes and welding spatter characteristics of self-shielded flux cored wire
pp. 777-780(4)
Authors: Liu, H.-Y.; Li, Z.-X.; Li, H.; Shi, Y.-W.

Influence of Cu addition on intermetallic compound formation and microstructure of Sn-3Ag-1˙5Sb-xCu solder joints
pp. 781-790(10)
Authors: Lee, H.T.; Huang, W.Y.; Chen, Y.F.