Science and Technology of Welding & Joining

Influence of carbon, manganese and nickel on microstructure and properties of strong steel weld metals: Part 1 – Effect of nickel content
pp. 1-8(8)
Authors: Keehan, E.; Karlsson, L.; Andrén, H.O.

Influence of carbon, manganese and nickel on microstructure and properties of strong steel weld metals: Part 2 – Impact toughness gain resulting from manganese reductions
pp. 9-18(10)
Authors: Keehan, E.; Karlsson, L.; Andrén, H.O.; Bhadeshia, H.K.D.H.

Influence of carbon, manganese and nickel on microstructure and properties of strong steel weld metals: Part 3 – Increased strength resulting from carbon additions
pp. 19-24(6)
Authors: Keehan, E.; Karlsson, L.; Andrén, H.O.; Bhadeshia, H.K.D.H.

Arc sensor sensitivity in short circuiting metal active gas welding with high speed torch oscillation
pp. 25-32(8)
Authors: Kodama, S.; Ichiyama, Y.; Ikuno, Y.; Baba, N.

Verification of numerical model to predict microstructure of austenitic stainless steel weld metal using synchrotron radiation and trans varestraint testing
pp. 33-42(10)
Authors: Osuki, T.; Yonemura, M.; Ogawa, K.; Komizo, Y.; Terasaki, H.

Effect of fluxes containing oxides on tungsten inert gas welding process
pp. 43-47(5)
Authors: Leconte, S.; Paillard, P.; Saindrenan, J.

Measurement of weldpiece distortion during pulsed laser welding using rapid laser profilometry
pp. 48-56(9)
Authors: Gorkič, A.; Jezeršek, M.; Možina, J.; Diaci, J.

Optimising pulsed current TIG welding parameters to refine the fusion zone
pp. 57-60(4)
Authors: Ravisankar, V.; Balasubramanian, V.

Material flow during friction stir spot welding
pp. 61-71(11)
Authors: Su, P.; Gerlich, A.; North, T.H.; Bendzsak, G.J.

Grain refinement and high performance of titanium alloy joint using arc-ultrasonic gas tungsten arc welding
pp. 72-74(3)
Authors: He, L.B.; Li, L.M.; Hao, H.W.; Wu, M.S.; Zhou, R.L.

Effect of dynamic loading on ductile crack initiation behaviour of notched specimen with strength mismatch
pp. 75-80(6)
Authors: An, G.B.; Ohata, M.; Park, J.U.; Toyoda, M.

Feedability of wires during metal active gas welding
pp. 81-93(13)
Authors: Shimizu, H.; Itoh, K.; Masaie, N.; Kurokawa, T.; Ushio, M.

Wear mechanism in contact tube
pp. 94-105(12)
Authors: Shimizu, H.; Yokota, Y.; Mizuno, M.; Kurokawa, T.

Neural network model of heat and fluid flow in gas metal arc fillet welding based on genetic algorithm and conjugate gradient optimisation
pp. 106-119(14)
Authors: Kumar, A.; DebRoy, T.

Optimisation of the GTA welding process using the Taguchi method and a neural network
pp. 120-126(7)
Authors: Lin, H.L.; Chou, C.P.

Coupled effect of heat input and beam oscillation on mechanical properties of alloy 718 electron beam weldments
pp. 127-134(8)
Authors: Sivaprasad, K.; Raman, S.G.S.; Murthy, C.V.S.; Reddy, G.M.