Science and Technology of Welding & Joining

Joining of alumina ceramics to metals
pp. 125-130(6)
Authors: Hafez, K.M.; El-Sayed, M.H.; Naka, M.

Gas metal arc welding process with periodic control of shielding gas composition
pp. 131-138(8)
Authors: Nakamura, T.; Hiraoka, K.; Takahashi, M.; Sasaki, T.

Study of grain size and microhardness of submerged arc welded joint of AISI 1060 steel
pp. 139-141(3)
Authors: Pathak, A.K.; Datta, G.L.

Laser welding of zinc coated steel in overlap configuration with zero gap
pp. 142-144(3)
Authors: Pieters, R.R.G.M.; Richardson, I.M.

Effect of weld metal copper content on HAZ cracking in austenitic stainless steel welded with Al brass
pp. 145-148(4)
Authors: Lee, H.W.; Sung, J.H.

Effect of welding process and groove angle on type IV cracking behaviour of weld joints of a ferritic steel
pp. 149-157(9)
Authors: Albert, S.K.; Tabuchi, M.; Hongo, H.; Watanabe, T.; Kubo, K.; Matsui, M.

Continuous welding of Cu-Ni dissimilar couple using CO₂ laser
pp. 158-166(9)
Authors: Phanikumar, G.; Dutta, P.; Chattopadhyay, K.

Microstructure and bend strength of WC-Co and steel joints
pp. 167-168(2)
Authors: Wang, H.; Yang, D.; Zhao, X.; Chen, C.; Wang, Q.

Influence of post-weld solution treatment on mechanical properties and microstructure of fusion zone of cobalt free maraging steel weldment
pp. 169-175(7)
Authors: Kumar, D. Siva; Sinha, P.P.; Prabhu, N.; Prabhugaunkar, G.V.

Modelling heat flow around tool probe in friction stir welding
pp. 176-186(11)
Authors: Schmidt, H.; Hattel, J.

Artificial neural networks - an aid to welding induced ship plate distortion?
pp. 187-189(3)
Authors: Lightfoot, M.P.; Bruce, G.J.; Mcpherson, N.A.; Woods, K.

Relationships between weld parameters, hardness distribution and temperature history in alloy 7050 friction stir welds
pp. 190-199(10)
Authors: Reynolds, A.P.; Tang, W.; Khandkar, Z.; Khan, J.A.; Lindner, K.

Arc power and efficiency in gas tungsten arc welding of aluminium
pp. 200-210(11)
Authors: Cantin, G.M.D.; Francis, J.A.

High power laser welding of Nb microalloyed steel plates
pp. 211-218(8)
Author: Harrison, P.L.

Fluxless laser beam joining of aluminium with zinc coated steel
pp. 219-226(8)
Authors: Laukant, H.; Wallmann, C.; Müller, M.; Korte, M.; Stirn, B.; Haldenwanger, H.G.; Glatzel, U.

Diode laser brazing of aluminium alloy to steels with aluminium filler metal
pp. 227-235(9)
Authors: Saida, Kazuyoshi; Song, Woohyun; Nishimoto, Kazutoshi

Solidification cracking in low alloy steel welds
pp. 236-243(8)
Authors: Shankar, V.; Devletian, J.H.

Voltage change in the GMAW process due to the influence of a droplet travelling in the arc
pp. 244-251(8)
Authors: Zhu, Peiyuan; Simpson, S.

Determination of lower bound fracture toughness of a high strength low alloy steel welded joint
pp. 252-258(7)
Author: Gubeljak, Nenad