Surface Engineering

Self-cleaning coatings
pp. 89-92(4)
Authors: Rios, P.F.; Dodiuk, H.; Kenig, S.

Prediction of hardness-depth profile from indentations at surface of materials
pp. 93-96(4)
Authors: Lesage, J.; Chicot, D.; Nosei, L.; Feugeas, J.

Cross-sectional indentation technique for thick film interfacial adhesion characterisation
pp. 97-100(4)
Authors: Lee, C.Y.; Dupeux, M.; Tuan, W.H.

Surface characterisation of electroless copper plated polyester fibres
pp. 101-105(5)
Authors: Guo, R.H.; Jiang, S.Q.; Yuen, C.W.M.; Ng, M.C.F.

Influence of pH value of TiO₂ sol on surface gloss of corresponding TiO₂ film coated on ceramic tiles
pp. 106-110(5)
Authors: Dai, W.X.; Chen, X.; Li, E.; Wang, X.X.; Liu, P.; Fu, X.Z.

Titanium dioxide performance in polyethylene teraphthalate protective coatings on electrolytic chromium coated steels
pp. 111-115(5)
Authors: Zumelzu, E.; Rull, F.; Ortega, C.

Investigation on thermal stability of TiO₂ films for application at high temperature
pp. 116-119(4)
Authors: Yao, J.K.; Huang, H.L.; Xu, C.; Ma, J.Y.; He, H.B.; Shao, J.D.; Jin, Y.X.; Zhao, Y.A.; Fan, Z.X.; Zhang, F.; Wu, Z.Y.

Corrosion behaviour of 316L stainless steel coated by amorphous and semicrystalline polypyrrole
pp. 120-126(7)
Authors: Ashrafi, A.; Golozar, M.A.; Mallakpour, S.

Study of chemical composition and heat treatment of electroless Ni-B-Tl alloy coating on AISI 316 stainless steel
pp. 127-130(4)
Authors: Abdeli, M.; Ahmadi, Parvini N.; Khosroshahi, R.A.

Effect of heating rate on structure of HA coating prepared by sol-gel
pp. 131-135(5)
Authors: Wang, H.; Chen, C.Z.; Wang, D.G.

Effect of heat treatment on performance of hydroxyapatite coatings immersed in simulated body fluid
pp. 136-140(5)
Authors: Xiao, G.-Y.; Lu, Y.-P.; Zhu, R.-F.; Xu, W.-H.; Wang, A.-J.; Zhan, Y.-J.

Evaluation of electrochemical properties of thermally oxidised Ti-6Al-4V for bioimplant application
pp. 141-145(5)
Authors: Biswas, A.; Manna, I.; Chatterjee, U.K.; Bhattacharyya, U.; Majumdar, Dutta J.

In vitro study of cell behaviour on plasma surface modified titanium
pp. 146-150(5)
Authors: Neto, Guerra C.L.B.; da Silva, M.A.M.; Alves Jr, C.

Investigation on phosphorus doping using H₃PO₄ as doping source by simple dip method and its electrical characterisation
pp. 151-155(5)
Authors: Moon, I.; Gunasekaran, M.; Kim, K.; Ju, M.; Han, S.; Yi, J.

Influence of electrosynthesis potential on corrosion performance of polypyrrole coated stainless steel and its mechanism research
pp. 156-162(7)
Authors: Zhu, R.L.; Li, G.X.; Zheng, J.H.; Jiang, J.W.; Zeng, H.B.

Evaluation of zinc rich ethyl silicate primer by applying electrochemical methods
pp. 163-166(4)
Authors: Akbarinezhad, E.; Faridi, H.R.; Ghanbarzadeh, A.

Direct laser deposition and sliding wear of AISI316/WC10Ni and AISI316/Cr₃C₂ surfaces
pp. 167-176(10)
Authors: Betts, J.C.; Mordike, B.L.; Fenech, M.; Grech, M.