Surface Engineering

How to predict and improve coating performance by nanomechanical testing
pp. 155-156(2)
Author: Beake, Ben

Tribological properties of electrodeposited Ni-Co-PTFE composite coatings
pp. 157-160(4)
Authors: Tang, H.K.; Zhao, W.Z.

Enhanced tribological properties of lotus leaf-like surfaces fabricated by capillary force lithography
pp. 161-164(4)
Authors: Singh, R.A.; Yoon, E.S.; Kim, H.J.; Kong, H.; Park, S.; Jeong, H.E.; Suh, K.Y.

Tribological properties of surface engineered hot work tool steel for aluminium extrusion dies
pp. 165-168(4)
Authors: Pellizzari, M.; Zadra, M.; Molinari, A.

Porous films on surface of titanium prepared by low voltage micro arc oxidation
pp. 169-172(4)
Authors: Hou, T.; Zhang, J.Z.

Effects of different alloying concepts of new hot work tool steels on the hardness profile after nitriding
pp. 173-176(4)
Authors: Schneider, R.; Schweiger, H.; Reiter, G.; Strobl, V.

Comparison of mechanical properties of various PVD hard coatings for forming tools
pp. 177-182(6)
Authors: Goršćak, .; Panjan, P.; Čekada, M.; Ćurković, L.

Influence of processing parameters on deposition rate and crystal structure of reactively sputtered HfC
pp. 183-186(4)
Authors: Mohammad, F.Z.; Lawson, K.J.; Nicholls, J.R.

4-(2-pyridylazo-)-resorcinol as effective corrosion inhibitor for mild steel in 0·5M sulphuric acid
pp. 187-193(7)
Authors: Dheer, N.; Kanojia, R.; Chandra, C.; Kim, H.; Singh, G.

Heat treated anodised titanium surfaces showing enhanced photocatalytic inhibition of microbial fouling
pp. 194-200(7)
Authors: Gopal, J.; George, R.P.; Muraleedharan, P.; Kalavathi, S.; Mangamma, G.; Khatak, H.S.

Tribological properties of atmospheric plasma sprayed Cr₂O₃ coatings: effect of NiAl bond coating
pp. 201-208(8)
Authors: Pantelis, D.I.; Sarafoglou, C.I.; Petsas, N.P.; Economou, S.N.; Vardavoulias, M.K.

Fretting wear studies on PVD TiN coated, ion implanted and thermally oxidised biomedical titanium alloys
pp. 209-215(7)
Authors: Vadiraj, A.; Kamaraj, M.; Gnanamoorthy, R.

Paste boriding process: evaluation of boron mobility on borided steels
pp. 216-222(7)
Authors: Campos, I.; Ramírez, G.; Figueroa, U.; Velázquez, C. Villa

Ion nitrided AISI H13 tool steel Part 2 - High temperature performance under sliding wear conditions
pp. 223-229(7)
Authors: Cruz, M.R.; Staia, M.H.

Structural properties of pulsed laser deposited zinc oxide thin films annealed at various temperatures
pp. 230-233(4)
Authors: Rusop, M.; Uma, K.; Soga, T.; Jimbo, T.

Hydrogenated amorphous carbon based solar cells by pulsed laser deposition with mixture of graphite and camphor as precursor materials
pp. 234-238(5)
Authors: Rusop, M.; Tian, X.M.; Soga, T.; Jimbo, T.; Umeno, M.; Sharon, M.