Surface Engineering

Challenges in controlling plasma processes using artificial neural network
pp. 225-226(2)
Author: Kim, B.

International conference diary
pp. 227-227(1)

Evaluation of corrosion behaviour of organic coatings with electrochemical noise and electrochemical impedance spectroscopy
pp. 229-234(6)
Authors: Mahjani, M.G.; Neshati, J.; Masiha, H.P.; Ghanbarzadeh, A.; Jafarian, M.

Improvement in galling performance through surface engineering
pp. 235-238(4)
Authors: Podgornik, B.; Vižintin, J.; Hogmark, S.

Composition and microstructure of modified silicide coating on niobium
pp. 239-242(4)
Authors: Yin, L.; Yi, D.; Yang, L.

Influence of bias and in situ cleaning on through cage (TC) or active screen plasma nitrided (ASPN) steels
pp. 243-247(5)
Authors: Hubbard, P.; Dowey, S.J.; Doyle, E.D.; McCulloch, D.G.

Cyclic oxidation behaviour of rare earth oxide coated Fe-20Cr alloys
pp. 248-252(5)
Authors: Fernandes, S.M.C.; Ramanathan, L.V.

Fatigue behaviour of 7075-T6 aluminium alloy coated with WC-12Co alloy deposited by plasma spray
pp. 253-262(10)
Authors: Puchi-Cabrera, E.S.; Maccio, R.; Staia, M.H.

Process limitations of magnetically enhanced reactive ion etch equipment
pp. 263-267(5)
Authors: Kim, B.; Park, J.Y.; Hong, S.J.

Preparation and characterisation of nanostructured tin oxide (SnO₂) films by sol-gel spin coating technique
pp. 268-276(9)
Authors: Savarimuthu, E.; Sankarasubramanian, N.; Subramanian, B.; Jayachandran, M.; Sanjeeviraja, C.; Ramamurthy, S.

Cyclic high temperature oxidation of HFPD thermal sprayed CoNiCrAlY coatings under simulated gas turbine and furnace environments
pp. 277-282(6)
Authors: Higuera Hidalgo, V.; Belzunce Varela, F.J.; Riba López, J.

Mechanical properties of tool steels with diffusion carbon and nitrocarbon layers
pp. 283-286(4)
Authors: Babul, T.; Kucharieva, N.; Nakonieczny, A.; Senatorski, J.

Evaluation of electrochemical and surface characteristics of conversion coatings on ZM21 magnesium alloy
pp. 287-293(7)
Authors: Natarajan, S.; Ravikiran, V.

Effect of cutting tools and cut materials on integrity of mirror surfaces
pp. 294-298(5)
Authors: Prohászka, J.; Horváth, M.; Mamalis, A.G.; Nyirö, J.

Influence of shot peening on tension-tension fatigue property of two high strength Ti alloys
pp. 299-303(5)
Author: Gao, Y.K.

Microstructural characterisation of NiWCrBSiC alloy coating produced by HVOF thermal spraying
pp. 304-313(10)
Authors: Gil, L.; Staia, M.H.; Guevara, R.; Puchi-Cabrera, E.S.; Lewis, D.B.

Humidity effect on friction and wear behaviour of self-lubricant coatings
pp. 314-319(6)
Authors: Picas, J.A.; Forn, A.; Baile, M.; Martín, E.