Authors: Lim, J. W.; Hassan, A.; Rahmat, A. R.; Wahit, M. U.

Source: Plastics, Rubber and Composites, Volume 35, Number 1, February 2006 , pp. 37-46(10)

Publisher: Maney Publishing

Abstract:

Rubber toughened polypropylene (PP) nanocomposites (RTPPNC) containing organophilic layered silicates were prepared by means of melt extrusion at 230°C using a co-rotating twin-screw extruder in order to examine the influence of the organoclay and polyethylene octene (POE) as filler and impact modifier, respectively, on mechanical and fracture properties. The mechanical properties of RTPPNC were studied through tensile, flexural and impact tests. The strength and stiffness of RTPPNC were improved significantly with an increase in the clay content, in the presence of maleic anhydride modified PP (PPgMAH). From the tensile and flexural tests, the optimum loading of organoclay in impact modified PP was found to be 6 wt-%. Conversely, the stiffness and strength of the blends decreased with respect to pure PP as the concentration of POE in the blends was increased. The essential work of fracture (EWF) method was also used to evaluate the fracture toughness of the RTPPNC. EWF measurements indicated that the specific essential work of fracture (w_e) decreased with an increase in the organoclay content. However, additions of POE elastomer are beneficial in enhancing the w_e of the PP blends. w_e appeared to increase with increasing POE content up to 20 wt-%.

Keywords: POLYPROPYLENE (PP); FRACTURE TOUGHNESS; NANOCOMPOSITE; ORGANOCLAY; MECHANICAL PROPERTIES; RUBBER-TOUGHENED

Document Type: Research Article

DOI: http://dx.doi.org/10.1179/174328906X79897

Publication date: 2006-02-01

More about this publication?

• This journal features top 10 articles which are freely available. Please click here and click on the 'Top articles' link in the right-hand menu to view the list and start downloading.
• Editorial Board
• Information for Authors
• Subscribe to this Title
• Terms & Conditions
• Online submission site
• Top 10 Articles
• ingentaconnect is not responsible for the content or availability of external websites

Related content

• In this: publication
• By this: publisher
• In this Subject: Materials & Manufacturing
• By this author: Lim, J. W. ;  Hassan, A. ;  Rahmat, A. R. ;  Wahit, M. U.

Website © Publishing Technology. Article copyright remains with the publisher, society or author(s) as specified within the article.

• Terms and conditions
• Privacy policy
• Information for advertisers