Powder Metallurgy

ISSN 0032-5899, Online ISSN: 1743-2901

Authors wishing to cite fast track papers should give the journal name and the article DOI. This will enable reference linking via CrossRef and allow forward and backward citation tracking systems to associate the fast track citation with the final journal reference.

Publisher: Maney Publishing on behalf of Institute of Materials, Minerals and Mining

54 fast track articles have been identified for this journal

Experimental and theoretical methods for optimal solids loading calculation in MIM feedstocks fabricated from powders with different particle characteristics
Authors: J. M. Contreras, A. Jiménez-Morales, J. M. Torralba
Appeared or available online: September 7, 2009
Synthesis of FeAl-TiC nanocomposite powder via mechanical alloying and subsequent annealing
Author: M. Zakeri, M. R. Rahimipour
Appeared or available online: September 7, 2009
Preparation of ZnFe₂O₄ nanopowders via sol-gel autoignition method
Author: Z. Q. Liu, G. Li, W. Chen
Appeared or available online: September 7, 2009
Effect of interconnected porosity on carbon diffusion depth in vacuum carburising process of iron compacts
Author: K. Widanka
Appeared or available online: September 7, 2009
Fabrication of ultrafine and nanocrystalline WC-Co mixtures by planetary milling and subsequent consolidations
Author: V. Bonache, M. D. Salvador, D. Busquets, E. F. Segovia
Appeared or available online: September 7, 2009
Comparison of sintering of titanium and titanium hydride powders
Author: I. M. Robertson, G. B. Schaffer
Appeared or available online: September 7, 2009
Fabrication of in situ TiB₂-TiC reinforced steel matrix composites by spark plasma sintering
Author: B. H. Li, Y. Liu, J. Li, H. Cao, L. He
Appeared or available online: September 7, 2009
PM processing and characterisation of Ti-7Fe low cost titanium alloys
Author: P. G. Esteban, L. Bolzoni, E. M. Ruiz-Navas, E. Gordo
Appeared or available online: September 7, 2009
Mechanical alloying of FeAl intermetallic powder for metal injection moulding process
Author: H. X. Song,Y.X.Wu, S. Yuan, Q. M. Gong, S.-J. Park, Randall M. German
Appeared or available online: May 15, 2009
Effect of cutting parameters on cutting force and surface roughness in milling alumina reinforced Al-6Zn-2Mg-2Cu composites
Authors: M. Übeyli, A. Acmr, Ö. Keleş, C. E. Akçay
Appeared or available online: May 15, 2009
Influence of nanosized Al₂O₃ weight percentage on microstructure and mechanical properties of Al-matrix nanocomposite
Author: H. Mahboob, S. A. Sajjadi, S. M. Zebarjad
Appeared or available online: May 15, 2009
Deformation and temperature aided sintering during hooker extrusion of sintered PM preforms of steel
Author: P. Chakravarthy, U. Chakkingal, P. Venugopal
Appeared or available online: May 15, 2009
Comparative study of carbon black and graphite powder as carbon source for PM compacts
Author: B.-Y. Chen, K.-S. Hwang
Appeared or available online: May 15, 2009
Investigation on die wear behaviour during compaction of aluminium matrix composite powders
Author: W. Li, S. J. Park, P. Suri, A. Antonyraj, Randall M. German
Appeared or available online: May 15, 2009
Master sintering curve concepts applied to full-density supersolidus liquid phase sintering of 316L stainless steel powder
Author: R. Bollina, S. J. Park, R. M. German
Appeared or available online: May 7, 2009
Congenerous and heterogeneous brazing of porous FeAl intermetallics
Author: H. Y. Gao, Y. H. He, P. Z. Shen, J. Zou, N. P. Xu, Y. Jiang, B. Y. Huang, C. T. Liu
Appeared or available online: May 6, 2009
Analysis of bending strength of porous titanium processed by space holder method
Authors: V. Amigó, L. Reig, D. J. Busquets, J. L. Ortiz, J. A. Calero
Appeared or available online: May 4, 2009
Constitutive analysis on formability of aluminium iron composite preforms using artificial neural network
Author: G. Poshal, P. Ganesan
Appeared or available online: May 4, 2009
Role of oxygen vacancy and grain boundary energy in stability of tetragonal and cubic pure zirconia powders
Author: M. K. Asgarani, A. Saidi, M. H. Abbasi
Appeared or available online: May 4, 2009
Comparative assessment of microstructure and compressive behaviours of PM TiAl alloy prepared by HIP and pseudo-HIP technology
Author: W. Zhang, Y. Liu, B. Liu, B. Y. Huang
Appeared or available online: May 4, 2009
New processing technology for manufacture of heavy duty metalloceramic brake pads
Author: D. Lenin Singaravelu, K. Chandra, P. S. Misra
Appeared or available online: May 4, 2009
Employing PVD thin films on press dies used in production of diamond composites
Author: W. Tillmann, E. Vogli, S. Momeni
Appeared or available online: May 4, 2009
Microstructural effects in wear of hardened sintered steels produced by diffusion bonded and prealloyed powders
Author: P. V. Muterlle, G. Straffelini, A. Molinari, W. Pahl
Appeared or available online: May 4, 2009
Effects of cold and hot densification on the mechanical properties of a 7XXX series powder metallurgy alloy
Author: I. A. MacAskill, A. D. P. LaDepha, J. H. Milligan, J. J. Fulton, D. P. Bishop
Appeared or available online: May 4, 2009
Milling process of petroleum coke for sintered steel applications
Authors: F. Velasco, S. Guzmán, M. E. Rabanal, J. M. Jiménez-Mateos, J. Echeberria, E. Ayerbe, J. A. Calero
Appeared or available online: April 30, 2009
Fabrication and characterisation of microporous titanium
Author: X. F. Wang, X. Wei, C. E. Wen, F. S. Han
Appeared or available online: April 30, 2009
Effect of reactive sintering conditions on microstructure of in situ titanium aluminide and silicide composites
Authors: P. Novák, T. Popela, J. Kubásek, J. Šerák, D. Vojtěch, A. Michalcová
Appeared or available online: April 30, 2009
Characterisation of in situ Al-TiB₂ nanocomposite powder synthesised by mechanical alloying
Author: Z. Sadeghian, M. H. Enayati, P. Beiss
Appeared or available online: April 30, 2009
Influence of retained hydride particles and microstructure on mechanical properties of PM produced Ti-6Al-4V alloy
Author: D. Bozic, V. Rajkovic, M. T. Jovanovic, B. Dimcic
Appeared or available online: April 30, 2009
Improvements in properties of sintered and cast Cu-Ag alloys by anneal hardening effect
Author: S. Nestorovic, I. Rangelov, D. Markovic
Appeared or available online: April 30, 2009
Synthesis of Co₃W-Cu composite nanopowders by mechanical milling and hydrogen reduction process
Author: B. Koozegar Kaleji, R. Sarraf-Mamoory, N. Hosseinabadi
Appeared or available online: April 30, 2009
Sintering viscosity and sintering stress of nanostructured WC-Co parts prepared by powder injection moulding
Author: A. Simchi
Appeared or available online: April 30, 2009
Ultrafine grained bulk ceramic composites consolidated from nanostructured composite powders by pressure less sintering
Author: Y. Yang, Y. Wang, Y. Zhao, W. Tian, J.-Q. He, H.-M. Bian
Appeared or available online: April 30, 2009
Effect of HIPing on microstructure and properties of spray formed Al-Li alloy UL40
Author: G. J. Reddy, N. Srinivasan, A. A. Gokhale, B. P. Kashyap
Appeared or available online: April 2, 2009
Characterisation of functionally graded and VC/steel surface alloyed composites produced using powder metallurgy
Author: M. Eroglu, S. H. Guler
Appeared or available online: March 27, 2009
(Ti,W)C-Ni cermets by laser engineered net shaping
Author: Y. Xiong, M. Kim, O. Seo, J. M. Schoenung, S. Kang
Appeared or available online: March 27, 2009
Comparative properties of 85W-15Cu powders prepared using mixing, milling and coating techniques
Authors: B. Özkal, A. Upadhyaya, M. L. Öveçoğlu, R. M. German
Appeared or available online: March 27, 2009
Effect of atomisation medium on sintering properties of austenitic stainless steel by eliminating influence of particle shape and particle size
Author: J. Lou, Y. M. Li, H. He, L. J. Li
Appeared or available online: March 27, 2009
Effect of powder particle size on laser induced self-propagating high temperature synthesis reaction in Al-Ti-C system
Author: Z. Xue, Y. X. Li
Appeared or available online: March 12, 2009
Study on Fe-Ti-V-C composite produced by self-propagating high temperature synthesis
Author: S. J. Fu, H. Cheng, Y. L. Yan, J. Wang, Y. C. Ding
Appeared or available online: March 12, 2009
Optimisation of process conditions in powder injection moulding of microsystem components using robust design method Part 2 - Secondary design parameters
Author: R. Urval, S. Lee, S. V. Atre, S.-J Park, R. M. German
Appeared or available online: November 24, 2008
Optimising grey iron powder compacts
Authors: W. Khraisat, H. Borgström, L. Nyborg, W. Abu al Jadayil
Appeared or available online: November 24, 2008
Fabrication of W-20%Cu composite powder from copper and tungsten salts
Author: M. Babapour Naseri
Appeared or available online: November 14, 2008
Sintering optimisation and solution annealing of high nitrogen nickel free austenitic stainless steels prepared by PIM
Author: D. W. Cui, X. H. Qu, P. Guo, K. Li
Appeared or available online: October 23, 2008
Synthesis of nanosized WC/MgO powders by high energy ball milling and analysis of reaction thermodynamics
Author: M. L. Zhang, S. G. Zhu, J. Ma, C. X. Wu, S. X. Zhu
Appeared or available online: October 23, 2008
Simulated effects of martensite start temperature, thermal conductivity and pore content on end quench cooling rate
Author: F. J. Semel, D. A. Lados
Appeared or available online: October 23, 2008
Synthesis, phase study and magnetic characterisation of Co₅₀Fe₄₀Cu₁₀ ternary alloy nanopowders prepared by mechanochemical alloying process
Author: N. Hosseinabadi, R. Sarraf Mamoory, B. K. Kaleji
Appeared or available online: October 23, 2008
Preparation of tungsten base composite powder by electroless nickel plating
Author: M. Amirjan, K. Zangeneh-Madar, N. Parvin
Appeared or available online: October 23, 2008
Experimental and numerical analysis on sintering behaviours of injection moulded components in 316L stainless steel powder
Author: J. Song, T. Barriere, B. Liu, J. C. Gelin, M. Gerard
Appeared or available online: September 12, 2008
Synthesis and characterisation of Si₃N_4p/Cu nanocomposite powders by high energy ball milling
Author: Z. J. Lu, Y. F. Shen, D. D. Gu
Appeared or available online: September 12, 2008
Comparison study of fly ash reinforced AA6061 composites using press sinter extrusion and press extrusion approaches
Author: P. R. S. Kumar, S. Kumaran, T. S. Rao
Appeared or available online: September 12, 2008
Phase formation and microstructural evolution during sintering of Al–Zn–Mg–Cu alloys
Author: M. Shah Mohammadi, A. Simchi, C. Gierl
Appeared or available online: September 12, 2008
Viscoelastic behaviour of porous sintered steels compact
Author: A. Antonyraj, S. J. Park, R. M. German
Appeared or available online: September 12, 2008
Influence of lanthanum on synthesis of SiC nanopowder
Author: N. Zhang, J. Li, L. Y. Wang, H. B. Long, X. Y. Wang, H. M. Kan
Appeared or available online: August 19, 2008

Key:

- Free Content

- New Content

- Subscribed Content

- Free Trial Content

Share this item with others: These icons link to social bookmarking sites where readers can share and discover new web pages.