Powder Metallurgy

News and views
pp. 1-5(5)

2007 JPMA development prizes
pp. 5-7(3)

Evaluation of health risks of nano- and microparticles
pp. 8-9(2)
Authors: Richter, V.; Potthoff, A.; Pompe, W.; Gelinsky, M.; Ikonomidou, H.; Bastian, S.; Schirmer, K.; Scholz, S.; Hofinger, J.

Evolution of PM nickel base superalloy processes and products
pp. 10-13(4)
Authors: Raisson, Gérard

Friction measurement and lubrication in unloading and ejection stages in powder pressing cycle
pp. 14-30(17)
Authors: Korachkin, D.; Gethin, D.T.; Lewis, R.W.; Tweed, J.H.

Manufacturing, microstructure and wear resistance of novel hot extruded Fe based metal matrix composites
pp. 31-37(7)
Authors: Karlsohn, M.; Weber, S.; Zaree, Alavi S.R.; Müller, S.; Theisen, W.; Reimers, W.; Pyzalla, A.R.

Iron-manganese: new class of metallic degradable biomaterials prepared by powder metallurgy
pp. 38-45(8)
Authors: Hermawan, H.; Alamdari, H.; Mantovani, D.; Dubé, Dominique

Experimental determination of Young's modulus in PM metal matrices used in diamond impregnated tools for cutting hard materials
pp. 46-52(7)
Authors: Rosa, L.G.; Amaral, P.M.; Fernandes, J.C.

SiC_p/Cu composites prepared by pressureless infiltration of copper into porous SiC preforms
pp. 53-58(6)
Authors: Zhang, L.; Qu, X.H.; He, X.B.; Duan, B.H.; Ren, S.B.; Qin, M.L.

Microstructure and mechanical properties of cp-titanium produced by spark plasma sintering
pp. 59-65(7)
Authors: Zadra, M.; Casari, F.; Girardini, L.; Molinari, A.

Flow and void formation in powder injection moulding feedstocks made with PEG/PMMA binders Part 1 - Experimental observations
pp. 66-71(6)
Authors: Chuankrerkkul, N.; Messer, P.F.; Davies, H.A.

Flow and void formation in powder injection moulding feedstocks made with PEG/PMMA binders Part 2 - Slip band model
pp. 72-77(6)
Authors: Chuankrerkkul, N.; Messer, P.F.; Davies, H.A.

Metal injection moulding of aluminium alloy 6061 with tin
pp. 78-83(6)
Authors: Liu, Z.Y.; Sercombe, T.B.; Schaffer, G.B.

Influence of multisteps thermal control in metal powder injection moulding process
pp. 84-88(5)
Authors: Hourng, L.W.; Wang, C.S.; Fan, G.W.

Three-dimensional finite element analysis of powder compaction process for forming cylinder block of hydraulic pump
pp. 89-94(6)
Authors: Lee, M.C.; Chung, S.H.; Cho, J.H.; Chung, S.T.; Kwon, Y.S.; Kim, H.J.; Joun, M.S.