Powder Metallurgy

News and views
pp. 1-5(5)

JPMA 2006 development prizes
pp. 6-6(1)

Hardmetals: trends in development and application
pp. 7-10(4)
Author: van den Berg, Henk

Investigation of composition and microstructure effect on fracture behaviour of tungsten heavy alloys
pp. 11-13(3)
Authors: Islam, S.H.; Qu, X.; He, X.

Relationship between physical structure and machinability of green compacts
pp. 14-20(7)
Authors: Degnan, C.C.; Kennedy, A.R.; Shipway, P.H.

Microstructure and mechanical properties of consolidated gamma titanium aluminides
pp. 21-27(7)
Authors: Kothari, K.; Radhakrishnan, R.; Wereley, N.M.; Sudarshan, T.S.

Microstructure and thermal stability of Al-Ti alloys prepared by mechanical milling and reactive sintering
pp. 28-32(5)
Authors: Peng, D.Y.; Li, B.L.; Chen, X.L.; Jiang, E.Y.; Bai, H.L.; Li, Z.Q.; Wu, P.

Dilatometric sintering study of titanium-titanium nitride nano/nanocomposite powders
pp. 33-39(7)
Authors: Dabhade, V.V.; Mohan, T. R. Rama; Ramakrishnan, P.

Spark plasma sintering of pure aluminium powder: mechanical properties and fracture analysis
pp. 40-45(6)
Authors: Zadra, M.; Casari, F.; Girardini, L.; Molinari, A.

Effects of adding overspray powder on microstructures and mechanical properties of spray deposited 8009 aluminium alloy
pp. 46-49(4)
Authors: Tan, D.Q.; Li, W.X.; Zhou, L.; Tang, J.C.; Tang, Y.P.; Zhan, X.J.

Effect of heat treatment on compressive properties of open cell Al/Al₂O₃ composite foams
pp. 50-53(4)
Authors: Yang, Y.J.; Han, F.S.; Yang, D.K.; Wu, J.; Hao, G.L.; Wang, Q.Z.

Compaction and sintering behaviour of A356-fly ash composites: a preliminary investigation
pp. 54-59(6)
Authors: Saheb, N.; Meng, P.T.; Daud, A.R.

PM processing and characterisation of new ZrO₂-fly ash composites
pp. 60-65(6)
Authors: Saheb, N.; Chia, C. Yang

Improvements to close coupled gas atomisation nozzle for fine powder production
pp. 66-71(6)
Authors: Ünal, R.

Processing and performance of Cr₂O₃-Fe₂O₃ reference electrode powders prepared by oxide coprecipitation
pp. 72-75(4)
Authors: Soykan, Hüseyin .; Karakaş, Yılmaz

Process simulation of powder injection moulding: identification of significant parameters during mould filling phase
pp. 76-85(10)
Authors: Atre, S.V.; Park, S.J.; Zauner, R.; German, Randall M.

Effect of processing parameters on electrical, mechanical and magnetic properties of iron-resin soft magnetic composite
pp. 86-90(5)
Authors: Hemmati, I.; Hosseini, H. R. Madaah; Miraghaei, S.

Consolidation and green body characteristics of gelcast metallic powder
pp. 91-93(3)
Authors: Santos, R.F.; Cardoso, K.R.; Albers, A.P.F.; Ortega, F.S.