Authors: Simchi, A.; Veltl, G.

Source: Powder Metallurgy, Volume 49, Number 3, September 2006 , pp. 281-287(7)

Publisher: Maney Publishing

Abstract:

An instrumented die was used to investigate the behaviour of metal powders during cold (ambienttemperature) and warm (up to 140^°C) compaction. This instrument enables simultaneousmeasurement of density, die wall friction coefficient, the triaxial stresses acting on the powderduring the course of compaction and ejection pressure. Commercial iron, titanium, aluminium,316L stainless steel (SS) and aluminium–silicon powders were employed for investigation. Theresults demonstrated the advantages of powder preheating on the compaction behaviour of metalpowders concerning green density, dimensional changes, frictional behaviour, ejectioncharacteristics and compactibility. However, the outlines also determined that the response ofthe non-ferrous powders to powder preheating is somehow different from those of the ferrouspowders. In this context, the behaviour of prealloy aluminium–silicon powders during compactionwas found of particular interest, as their compactibility is strongly affected by powder preheating,whereas the dimensional changes after ejection decrease considerably. This article presents theeffect of cold and warm compaction on the consolidation and ejection characteristics of ferrousand non-ferrous metal powders. The influence of compaction condition (pressure andtemperature) with considering of the powder characteristics and densification mechanisms areunderlined.

Keywords: COMPACTABILITY; METAL POWDER; WARM COMPACTION; EJECTION; COMPACTION BEHAVIOUR; FRICTION

Document Type: Research Article

DOI: http://dx.doi.org/10.1179/174329006X110844

Publication date: 2006-09-01

More about this publication?

• Authors wishing to cite fast track papers should give the journal name and the article DOI. This will enable reference linking via CrossRef and allow forward and backward citation tracking systems to associate the fast track citation with the final journal reference.

• Editorial Board
• Information for Authors
• Subscribe to this Title
• Terms & Conditions
• Online submission site
• ingentaconnect is not responsible for the content or availability of external websites

Related content

• In this: publication
• By this: publisher
• In this Subject: Mining & Metallurgy
• By this author: Simchi, A. ;  Veltl, G.

Website © Publishing Technology. Article copyright remains with the publisher, society or author(s) as specified within the article.

• Terms and conditions
• Privacy policy
• Information for advertisers