Materials Technology: Advanced Performance Materials

Focus on light metals
pp. 61-61(1)
Author: Froes, F. H. (Sam)

Production of titanium and titanium alloys by electrochemical reduction of oxide precursors
pp. 62-65(4)
Authors: Dring, K.; Rosenkilde, C.

Electrolytic process to produce titanium from TiO₂ feed
pp. 66-70(5)
Authors: Withers, J.C.; Loutfy, R.O.; Laughlin, J.P.

Direct chill casting of aluminium-manganese against aluminium-silicon layer via Novelis Fusion process
pp. 71-75(5)
Authors: Gupta, A.; Lee, S.T.; Wagstaff, R.B.

Adhesive bonding between Mg alloys and polypropylene
pp. 76-80(5)
Authors: Liu, L.M.; Xie, L.

Effects of curing atmosphere pressure on properties of silica fibre reinforced silicon-boron nitride matrix composites derived from precursor infiltration and pyrolysis
pp. 81-84(4)
Authors: Li, B.; Zhang, C.R.; Cao, F.; Wang, S.Q.; Li, J.S.; Chen, B.

Hydrothermal electrophoretic deposition of yttrium silicate coating on SiC-C/C composites
pp. 85-87(3)
Authors: Huang, J.-F.; Zhang, Y.-T.; Zeng, X.-R.; Cao, L.-Y.; Deng, F.; Wu, J.-P.

Influence of deposition voltage on phases and microstructure of hydroxyapatite coatings prepared on C-C composites by hydrothermal electrodeposition
pp. 88-90(3)
Authors: Huang, J.F.; Zhu, G.Y.; Cao, L.Y.; Wu, J.P.; He, H.Y.

Infrared spectral studies on relationship between phase transition and grain size of nanometre size γ-Al₂O₃ powder
pp. 91-94(4)
Authors: Li, D.; Zhu, H.-L.; Chen, S.-O.; Jing, Y.-L.; Shao, W.-Q.; Luan, W.-N.; Zhang, Y.-C.

Humidity sensitivity of CoTiO₃ thin film prepared by sol-gel method
pp. 95-97(3)
Author: He, H.Y.

Preparation of ZnO doped PbWO₄ composite nanofilms with enhanced photoluminescence
pp. 98-100(3)
Authors: Zhuang, L.; Wu, Q.-S.; Zhang, F.; Ding, Y.-P.

Innovations in titanium technology
pp. 101-104(4)
Author: Froes, F.H.

Powder injection moulding of metals, ceramics and carbides
pp. 105-107(3)
Author: Froes, F.H.

Future technologies, applications and opportunities for light metals
pp. 108-109(2)
Author: Clinch, M.

Innovations
pp. 110-116(7)

In brief
pp. 117-128(12)