Metals Technology

High-temperature deformation of ESR En 36 steel
pp. 1-5(5)
Authors: Jain, N. K.; Nair, C. G. K.; Abraham, K. P.; Prasad, Y. V. R. K.

Influences of superheat and grain structure on hot-tearing susceptibilities of AI-Cu alloy castings
pp. 6-13(8)
Authors: Spittle, J. A.; Cushway, A. A.

Fractographic study of mechanisms of fracture in cropping thin-walled steel tubes
pp. 14-19(6)
Authors: Rao, R. S.; Alexander, J. M.

Susceptibility to hydrogen-induced delayed failure of temperembrittled, low-alloy steel
pp. 20-23(4)
Authors: Bernabai, U.; Bombara, G.; Borruto, A.

Solidification sequences in austenitic steel weld metal deposited on ferritic base material
pp. 24-27(4)
Author: Allen, D. J.

Computer model for predicting heat-affected-zone structures in mechanized tungsteninert gas weld deposits
pp. 28-38(11)
Authors: Alberry, P. J.; Brunnstrom, R. R. L.; Jones, K. E.

Translations
pp. 39-40(2)

Microstructural aspects of aluminized coatings on nickel-base alloys
pp. 41-51(11)
Author: Slattery, G. F.

Effect of Zn and Bi addition on precipitation process after quenching and cold vvorking Al-6Mg
pp. 52-56(5)
Authors: Fiorini, P.; Giordano, G.

Shear instabilities in blanking and related processes
pp. 57-60(4)
Author: Dodd, B.

Incremental solidification and forming
pp. 61-68(8)
Authors: Singer, A. R. E.; Evans, R. W.

Laser treatment of grey iron
pp. 69-77(9)
Authors: Trafford, D. N. H.; Bell, T.; Megaw, J. H. P. C.; Bransden, A. S.

Translations
pp. 78-80(3)

Modification of mathematical analyses and related physical descriptions used to describe channel segregation
pp. 81-84(4)
Authors: Voller, V. R.; Moore, J. J.; Shah, N. A.

Anneal hardening in α-brass
pp. 85-88(4)
Authors: Lee, W. B.; Duggan, B. J.

Effects of nitriding at low nitrogen partial pressures on yield and fatigue in some stainless steels
pp. 89-95(7)
Authors: Aghazadeh-Mohandesi, J.; Priestner, R.

Thermal diffusivities of oxide scales on iron-base binary alloys and steels
pp. 96-104(9)
Authors: Fowler, C. M.; Taylor, R.; Rolls, R.

Centrifugal spray forming of large-diameter tubes
pp. 105-110(6)
Authors: Singer, A. R. E.; Hodkin, D. J.; Sutcliffe, P. W.; Mardon, P. G.

Model for optimization of furnace operation
pp. 111-114(4)
Author: Luong, L. H. S.

Hard chrome coatings deposited by physical vapour deposition
pp. 115-118(4)
Authors: Gillet, R.; Aubert, A.; Gaucher, A.

Translations
pp. 119-120(2)

Pre-primary phase formation in solidification of nickel-aluminium bronze
pp. 121-124(4)
Authors: Feest, E. A.; Cook, I. A.

Origins of dendritic AIN precipitates in aluminium-killed-steel castings
pp. 125-129(5)
Authors: Croft, N. H.; Entwisle, A. R.; Davies, G. J.

Wear of metal-working tools ion plated with titanium nitride
pp. 130-134(5)
Authors: Sundquist, H. A.; Sirvio, E. H.; Kurkinen, M. T.

Wear and fatigue failure of slitting discs used in fine friction cutting of metals
pp. 135-145(11)
Authors: Childs, T. H. C.; Bedford, S. R. M.

Production of Cu and Cu alloy tubes from strip by welding
pp. 146-149(4)
Authors: Orzechowski, H.; Kastner, P.; Chromik, H.

Vanadium - a brief review of world production and trade 1976-1980
pp. 150-158(9)
Author: Briggs, S. J.

Translations
pp. 159-160(2)

Strains in extra-low-carbon steel sheets after weak (skin-pass) rolling
pp. 161-166(6)
Authors: Amiot, B.; Despujols, J.

Effect of thermomechanical treatment on structure and mechanical properties of plain low-carbon dual-phase steel
pp. 167-172(6)
Authors: Deb, P.; Chaturvedi, M. C.

Effect of carburizing on unidirectionalbending fatigue strength of 635A14 10lN-alloy steel
pp. 173-181(9)
Authors: Majid, M. A.; Child, H. C.

Pricing of aluminium semifinished products in Western Europe
pp. 182-187(6)
Author: Camatini, G.

Service and technical support for strip products
pp. 188-193(6)
Authors: Carr, K. W.; Howells, J. M. G.; McBain, G.

Developing the market for steel products in construction
pp. 194-196(3)
Author: Makins, N. S.

An approach to development and application of copperbased products
pp. 197-201(5)
Author: Davies, M. H.

Translations
pp. 202-204(3)

New technique for determining temperature distribution in cemented carbide cutting tools
pp. 205-214(10)
Author: Dearnley, P. A.

Laser surface melting of some alloy steels
pp. 215-223(9)
Authors: Christodoulou, G.; Walker, A.; Steen, W. M.; West, D. R. F.

Physical metallurgy of high-strength, low-alloy line-pipe and pipe-fitting steels
pp. 224-233(10)
Author: Sage, A. M.

Steel requirements for current and future Canadian gas pipeline systems
pp. 234-241(8)
Authors: Shelton, E.; Rothwell, A. B.; Coote, R. I.

Translations
pp. 242-244(3)

Relationship between structure and fracture behaviour in 6W-5Mo-2V type high-speed steel
pp. 245-256(12)
Authors: Horton, S. A.; Child, H. C.

Evaluation of some new cast hot-work die steels using simulation wear test
pp. 257-263(7)
Authors: Tittagala, S. R.; Beeley, P. R.; Bramley, A. N.

Development of recrystallization textures in ferritic stainless steels and their relationship to formability
pp. 264-273(10)
Authors: Lewis, D. B.; Pickering, F. B.

Dual-phase and other formable steels
pp. 274-281(8)
Author: Gladman, T.

Translations
pp. 282-284(3)

Solubility model to predict effects of aluminium and nitrogen contents on susceptibility of steel castings to intergranular embrittlement
pp. 285-290(6)
Author: Croft, N. H.

Prediction of blowhole formation in iron-carbon-nitrogen alloys
pp. 291-295(5)
Authors: Valencia, J. J.; Beech, J.

Effect of σ-phase precipitation on hot ductility in δ-ferrite-austenite duplex stainless steels
pp. 296-303(8)
Authors: Maehara, Y.; Ohmori, Y.; Kunitake, T.

Effect of thermal softening on Swift and Hill instability limits in forming
pp. 304-307(4)
Authors: Dodd, B.; Atkins, A. G.

Microcracking of high-speed-steel tools during cutting
pp. 308-314(7)
Authors: Shelton, P. W.; Wronski, A. S.

Development of an improved steel for pipe fittings
pp. 315-321(7)
Authors: Randerson, K.; Martin, I. W.; Chapman, J. A.; Smith, G. C.

Production of line pipe in Japan
pp. 322-329(8)
Authors: Nara, Y.; Kyogoku, T.; Yamura, T.; Takeuchi, I.

Translations
pp. 330-332(3)

Notch toughness of boron-treated high-strength structural steels
pp. 333-339(7)
Authors: Nakasato, F.; Ohtani, H.

Thermoforming of superplastic sheet in shaped dies
pp. 340-348(9)
Author: Ragab, A. R.

Advances in welding metallurgy of steel
pp. 349-362(14)
Author: Dolby, R. E.

Effect of heat input on HAZ toughness in HSLA steels
pp. 363-367(5)
Authors: Bhale, S. D.; Billingham, J.

Translations
pp. 368-370(3)

Translations
pp. 371-372(2)

Influence of δ-ferrite content on transformation to intermetallic phases in heat-treated, type 316 austenitic stainless steel weld metal
pp. 373-385(13)
Authors: Slattery, G. F.; Keown, S. R.; Lambert, M. E.

Retrogression and reaging response of 7475 aluminium alloy
pp. 386-392(7)
Authors: Islam, M. U.; Wallace, W.

Influence of composition and temperature upon relativeplasticity index of silicate inclusions in steel
pp. 393-400(8)
Authors: Wardle, G.; Billington, J. C.

Effect of pouring conditions on heat flux and mass transfer in liquid core during continuous casting of steel
pp. 401-405(5)
Authors: Revtov, N. I.; Kazachkov, E. A.; Young, J. M.; Bennett, G. H. J.; Kuzhelnay, L. I.

Non-ferrous metals and ferro-alloys: forecasting, forward currency cover, and purchasing tactics and strategy
pp. 406-409(4)
Author: Hone, A.

Translations
pp. 410-412(3)

Microstructures and mechanical properties of leaded aluminium alloys
pp. 413-423(11)
Authors: Tiwari, S. N.; Pathak, J. P.; Malhotra, S. L.

Mechanisms of ductile fracture in ferritic-pearlitic and ferritic-martensitic steels
pp. 424-434(11)
Authors: Melander, A.; Olsson, K.

Melt spinning Ni-based superalloys
pp. 435-438(4)
Authors: Piggs, S. J.; Charles, J. A.

Cylindrical bending of metal strips
pp. 439-447(9)
Authors: Yu, T. X.; Johnson, W.

Processing of high-purity sponge iron pellets to hotand cold-rolled strip
pp. 448-451(4)
Authors: Ahier, S. J.; Singer, A. R. E.

Translations
pp. 452-452(1)

Effect of solidification mode on hot ductility of austenitic stainless steels
pp. 453-460(8)
Authors: Myllykoski, L.; Suutala, N.

Microstructural examination of 1Cr-O-5Mo steel during creep
pp. 461-463(3)
Authors: Afrouz, A.; Collins, M. J.; Pilkington, R.

Evaluation of three different test methods for charging hydrogen into iron
pp. 464-470(7)
Authors: Chan, S. L. I.; Martinez-Madrid, M.; Charles, J. A.

Wear resistance of high-speed steel milling tools
pp. 471-481(11)
Authors: Söderberg, S.; Hogmark, S.; Haag, H.; Wisell, H.

Wear mechanisms of Syalon ceramic tools when machining nickel-based materials
pp. 482-489(8)
Authors: Bhattacharyya, S. K.; Jawaid, A.; Lewis, M. H.; Wallbank, J.

Translations
pp. 490-492(3)