Materials Science and Technology

ISSN 0267-0836, Online ISSN: 1743-2847

Authors wishing to cite fast track papers should give the journal name and the article DOI. This will enable reference linking via CrossRef and allow forward and backward citation tracking systems to associate the fast track citation with the final journal reference.

Publisher: Maney Publishing on behalf of Institute of Materials, Minerals and Mining

153 fast track articles have been identified for this journal

Synthesis and characterisation of threedimensional dendritic ZnO nanorods
Author: Y. Tian, H. B. Lu, Y. Wu, J. C. Li
Appeared or available online: November 12, 2009
Review of effect of P and Sr on modification and porosity development in Al-Si alloys
Authors: J. Campbell, M. Tiryakioğlu
Appeared or available online: November 12, 2009
Optimisation of extrusion die profile to satisfy metallurgical and manufacturing criteria
Author: K. K. Pathak, Vikas S. Pagey, N. Ramakrishnan
Appeared or available online: November 12, 2009
Evolution of microstructure and texture during annealing of two high strength interstitial free steels containing Nb and or Ti
Author: A. Saha Podder, D. Bhattacharjee, Sudin Chatterjee, R. K. Ray
Appeared or available online: October 23, 2009
Influence of nanodispersions on strength-ductility properties of semisolid cast A356 Al alloy
Author: I. S. El-Mahallawi, Y. Shash, K. Eigenfeld, T. S. Mahmoud, R. M. Ragaie, A. Y. Shash, M. A. El Saeed
Appeared or available online: October 20, 2009
Ball milling criteria for producing nano intermetallic compounds
Author: H. Mirzadeh, A. Zomorodian
Appeared or available online: October 20, 2009
Synthesis of porous silicon carbide from cellulose fibre templates infiltrated with polycarbosilane
Author: A. T. Harris, A. R. Maddocks
Appeared or available online: October 20, 2009
Microstructures and mechanical properties of tungsten inert gas arc welded magnesium metal matrix composite (TiCp/AZ91D)
Author: Z. Z. Xuan, X. Y. Gu, R. Zhong, D. Q. Sun
Appeared or available online: October 12, 2009
High temperature deformation and microstructural evolution of Mg-Gd-Y alloys
Author: X. B. Liu, R. S. Chen, E. H. Han
Appeared or available online: October 12, 2009
Microjoining of Ni₃Al based intermetallic thin foils
Authors: P. Jozwik, Z. Bojar, P. Kołodziejczak
Appeared or available online: October 12, 2009
Improving high temperature properties of alumina based ceramic cores containing yttria by vacuum impregnating
Author: H. H. Wu, D. C. Li, Y. P. Tang, X. J. Chen, D. Y. Xu, B. Sun
Appeared or available online: October 12, 2009
Microstructure and mechanical properties of nickel based superalloy IN718 produced by rapid prototyping with electron beam melting (EBM)
Author: A. Strondl, M. Palm, J. Gnauk, G. Frommeyer
Appeared or available online: October 12, 2009
Characterisation of aluminium nanopowder produced by evaporation-condensation method
Author: S. H. Hosseini, S. Sheibani, Z. Valefi
Appeared or available online: October 12, 2009
Synthesis and kinetics research of ZnS nanoparticles prepared by sonochemical process
Author: J.-R. Li, J.-F. Huang, L.-Y. Cao, J.-P. Wu, H.-Y. He
Appeared or available online: October 12, 2009
Evaluation and application of a fast EBSD detector
Author: I. Brough, F. J. Humphreys
Appeared or available online: October 12, 2009
Interface evolution of SiO₂ glass ceramic and Ti-6Al-4V alloy joint brazed with Ag-Cu-Ti alloy
Author: D. Liu, L. X. Zhang, J. C. Feng, H. B. Liu, P. He
Appeared or available online: October 12, 2009
Overload failure behaviour of dissimilar thickness resistance spot welds during tensile shear test
Author: S. P. H. Marashi, M. Pouranvari, M. Salehi, A. Abedi, S. Kaviani
Appeared or available online: October 12, 2009
Study on Young's modulus and microhardness of carbon nanotubes reinforced copper nanocomposite
Author: R G Patil, V. Chatpalli, K. R. Kannan
Appeared or available online: October 12, 2009
Deriving grain boundary character distributions and relative grain boundary energies from three-dimensional EBSD data
Author: G. S. Rohrer, J. Li, S. Lee, A. D. Rollett, M. Groeber, M. D. Uchic
Appeared or available online: October 12, 2009
Hot deformation behaviour of precipitation hardening stainless steel
Author: H. Mirzadeh, A. Najafizadeh, M. Moazeny
Appeared or available online: October 12, 2009
Multisheet structure of inconel 718 superalloy processed by LBW/SPF technology and its microstructure
Author: F. S. Qu, K. F. Zhang, B. Y. Li
Appeared or available online: October 12, 2009
Stellite 21 coatings on AISI 410 martensitic stainless steel by gas tungsten arc welding
Author: M. S. Laridjani, A. Amadeh, H. Kashani
Appeared or available online: September 23, 2009
Effect of magnetic field on solidification structure of a centrifugal cast high speed steel roll
Author: X. D. Zhang, W. Liu, Q. L. Li, A. Godfrey, Q. Liu
Appeared or available online: September 23, 2009
Grain refinement of AZ91D by spinning spray of carbon dioxide gas and its effect on mechanical property
Author: E. Zhang, G. J. Wang, J. W. Xu, Z. C. Hu
Appeared or available online: September 23, 2009
Precipitation of secondary phases in super duplex stainless steel ZERON100 isothermally aged
Author: I. Calliari, M. Pellizzari, E. Ramous
Appeared or available online: September 23, 2009
Flow behaviour and microstructural evolution of Ti-17 alloy with lamellar microstructure during hot deformation in α+β phase field
Author: K. X. Wang, W. D. Zeng, Y. Q. Zhao, Y. J. Lai, X. M. Zhang, Y. G. Zhou
Appeared or available online: September 23, 2009
The biomimetic deposition of carbonate apatite induced by titanium base calcium enriched silica films
Author: X. F. Xiao, R. F. Liu, Y. J. Gao
Appeared or available online: September 23, 2009
Effect of Bi₂O₃ coating of whisker on thermal expansion behaviour of aluminium composite reinforced by aluminium borate whisker
Author: Z. J. Li, W. D. Fei, L. D. Wang, L. M. Liu
Appeared or available online: September 15, 2009
Factors affecting mechanical properties of resistance spot welds
Author: M. Pouranvari, S. P. H. Marashi
Appeared or available online: September 15, 2009
On effect of FSP on microstructural and mechanical characteristics of A390 hypereutectic Al-Si alloy
Author: T. S. Mahmoud, O. M. Shaban, H. M. Zakaria,T. A. Khalifa
Appeared or available online: September 15, 2009
Wear behaviour of Al-Al²O³ nanocomposites prepared by mechanical alloying and hot pressing
Author: M. Tavoosi, F. Karimzadeh, M. H. Enayati
Appeared or available online: September 15, 2009
Modelling and analysis of electrochemical machining of cast Al/20%SiCp composites
Author: C. Senthilkumar, G. Ganesan, R. Karthikeyan, S. Srikanth
Appeared or available online: September 15, 2009
Nanosized Zn-Sn metal composite oxide: a new anode material for Li ion battery
Author: F. Huang, X.-Z. Lu, Y. Liu, J. Liu, R. Wu
Appeared or available online: September 15, 2009
Effects of SnO on growth and physical properties of BSCCO whiskers
Author: S. Altin, M. A. Aksan, Y. Balci, M. E. Yakinci
Appeared or available online: September 15, 2009
Comparison of microstructures and thermal insulation capability of plasma sprayed nanostructured and traditional YPSZ coatings
Author: W. Q. Wang, W. B. Gong, K. Ma, D. Q. Sun
Appeared or available online: September 15, 2009
Preparation of FeAl-Al₂O₃ nanocomposite via mechanical alloying and subsequent annealing
Author: J. Pourhosseini, M. Zakeri, M. R. Rahimipour, E. Salahi, Gh. R. Pourhosseini
Appeared or available online: September 15, 2009
Three-dimensional thermomechanical coupled FEM analysis of static recrystallisation during two-pass tube tension reducing process
Author: F. Z. Wang, H. C. Zhang, X. Z. An, G. Q. Liu, L. Lu, G. Y. Zhu
Appeared or available online: September 15, 2009
Dielectric properties in GHz range of porous Si₃N₄-BN-SiO₂ ceramics with considerable flexural strength prepared by low temperature sintering in air
Author: J. C. Han, Y. B. Sun, Y. M. Zhang
Appeared or available online: September 15, 2009
Quasicrystalline phase formation during heat treatment in mechanically alloyed Al₆₅Cu₂₀Fe₁₅ alloy
Author: M. Gogebakan, B. Avar
Appeared or available online: September 7, 2009
Prediction of residual stress distributions for single weld beads deposited on to SA508 steel including phase transformation effects
Author: H. Dai, J. A. Francis, P. J. Withers
Appeared or available online: September 7, 2009
Microstructure and wear properties of in situ multiple carbides reinforced Fe based surface composite coating produced by laser cladding
Author: X. H. Wang, M. Zhang, B. S. Du, S. Y. Qu, Z. D. Zou
Appeared or available online: September 7, 2009
Preparation of porous ZnO/SnO₂ compound films by sol-dipping template method
Author: Z. F. Liu, J. Ya, L. E, J. W. Liu
Appeared or available online: September 7, 2009
Estimation of Weibull parameters with linear regression method
Author: J. C. Zhou, D. F. Wu
Appeared or available online: September 7, 2009
TTP diagrams for aluminium alloy 1933
Author: S. D. Liu, Q. M. Zhong, X. M. Zhang, Y. L. Deng
Appeared or available online: September 7, 2009
Similar and dissimilar RSW of low carbon and austenitic stainless steels: effect of weld microstructure and hardness profile on failure mode
Author: M. Pouranvari, S. P. H. Marashi
Appeared or available online: September 7, 2009
Laser surface alloying of 1045 AISI steel using Ni-CrB₂ powder
Author: S. Klachuk, M. Bamberger
Appeared or available online: September 7, 2009
Characterisation of detonation sprayed Mo-Co-Cr-B alloy coatings
Author: H. P. Lv, J. Wang, Y. G. Yan, Q. Z. An, P. L. Nie, B. D. Sun
Appeared or available online: September 4, 2009
Microstructure and texture evolution of particle-containing AA3104 alloy cold rolled to large strains
Author: Z. Y. Yao, Z. Q. Zhang, A. Godfrey, W. Liu, Q. Liu
Appeared or available online: September 4, 2009
Superplastic deformation of laser welded Ti-6Al-4V sheet
Author: D. H. Cheng, J. H. Huang, H. Zhang, X. K. Zhao
Appeared or available online: August 26, 2009
Nd:YAG laser cladding Ni base alloy/nano-h-BN self-lubricating composite coatings
Author: H. Yan, A. H. Wang, X. L. Zhang, Z. W. Huang, W. Y. Wang, J. P. Xie
Appeared or available online: August 26, 2009
TiO₂ films prepared by ultrasonic spray pyrolysis
Author: A. Nakaruk, P. J. Reece, D. Ragazzon, C. C. Sorrell
Appeared or available online: August 26, 2009
Reduction characteristics of iron oxide in nanoscale
Author: K. S. Abdel Halim, M. H. Khedr, N. K. Soliman
Appeared or available online: August 26, 2009
Novel piezoresistive composite with high sensitivity to stress/strain
Author: B. G. Han, B. Z. Han, J. P. Ou
Appeared or available online: August 19, 2009
Dynamic recrystallisation in aluminium alloyed hypereutectoid steels under hot working conditions
Author: M. P. Phaniraj, Y. S. Jang, D.-I. Kim, J.-H. Shim, C. Y. Lee, D. L. Lee
Appeared or available online: August 19, 2009
Characteristics of forming limit diagram of copper alloyed interstitial free steel
Author: R. Rana, S. B. Singh, W. Bleck, O. N. Mohanty
Appeared or available online: August 19, 2009
Modification of nanometre calcium carbonate and its application on PVC composites in situ suspension polymerisation
Author: T. Y. Chen, W. F. Li, J. D. Jun, J. H. Pen, J. X. Chao
Appeared or available online: August 19, 2009
Effects of RE-Al additions and austenitising time on structural variations of medium carbon Fe-B cast alloy
Author: D. W. Yi, D. J. Xing, H. G. Fu, S. Q. Ma, Z. X. Liu
Appeared or available online: August 19, 2009
Adiabatic shearing behaviour of unweldable Al-Sc alloy under extremely high shear loading
Author: W.-S. Lee, T.-H. Chen, G.-T. Lu
Appeared or available online: August 19, 2009
Mechanical and wear behaviour of alloyed hypereutectic grey cast iron
Author: A. Vadiraj, G. Balachandran, M. Kamaraj, B. Gopalakrishna, D. V. Rao
Appeared or available online: August 19, 2009
Simple macro/microcoupling mathematical model and its predicting on effects of processing factors on solidification structure for 1Cr18Ni9Ti stainless steel twin-roll thin strip
Author: M. B. Yang, F. S. Pan
Appeared or available online: August 19, 2009
Tin induced crystallisation of hydrogenated amorphous silicon thin films
Author: M. Jeon, C. Jeong, K. Kamisako
Appeared or available online: August 19, 2009
Effect of mechanical properties of annealed Al 5005 sheets on void formation and growth during metal forming
Author: R. Ravindran, K. Manonmani, R. Narayanasamy
Appeared or available online: August 7, 2009
Modelling correlation between hot working parameters and flow stress of IN625 alloy using neural network
Author: M. Montakhab, P. Behjati
Appeared or available online: August 3, 2009
Study of precipitation hardening in lead calcium tin anodes for copper electrowinning
Authors: C. Camurri, C. Carrasco, O. Prat, R. Mangalaraja, A. Pagliero, R. Colàs
Appeared or available online: July 28, 2009
Carbon monoxide gas-sensing properties of CeO₂-WO₃ thin films
Author: M. F. Al-Kuhaili, S. M. A. Durrani, I. A. Bakhtiari
Appeared or available online: July 24, 2009
Microstructure and polarisation behaviour of TiN-TiB₂ matrix coating prepared by reactive plasma spraying
Author: J. Ma, Z. P. Mao, B. D. Sun, J. Wang
Appeared or available online: July 24, 2009
Low cycle fatigue behaviour of hot extruded Al-4Mg-1Nd alloy
Author: L. J. Chen, X. Wang, C. Y. Ma, X. Che
Appeared or available online: July 24, 2009
Effect of Mn on Sn-Ag-Cu ternary lead free solder alloy-Cu assembly: a comparative study
Author: M. Ghosh, M. K. Gunjan, S. K. Das, A. Kar, R. N. Ghosh, A. K. Ray
Appeared or available online: July 24, 2009
High temperature stability of fine grained 7075Al alloy containing nanosized SiC particles
Author: H. Mohseni, S. Keirs, S. L. I. Chan, M. Ferry
Appeared or available online: July 24, 2009
Effect of annealing and aging treatment on mechanical properties of ultrafine grained Al 6061 alloy
Author: P. N. Rao, S. K. Panigrahi, R. Jayaganthan
Appeared or available online: July 24, 2009
Engineering approach for predicting post-impact compressive strength of laminated composites
Author: H.-P. Cui, W.-D. Wen, H.-T. Cui
Appeared or available online: July 24, 2009
Purifying multicrystalline silicon by directional solidification method with induced electromagnetic field
Author: J. Zhang, T. J. Li, X. D. Ma, D. W. Luo, D. H. Liu, N. Liu, Y. B. Zhang
Appeared or available online: June 24, 2009
Development of rapid heating and cooling (flash processing) process to produce advanced high strength steel microstructures
Author: T. Lolla, G. Cola, B. Narayanan, B. Alexandrov, S. S. Babu
Appeared or available online: June 24, 2009
Phase transformation and microstructural changes during aging process in Ag-Pd-Cu-Pt-Zn alloy
Author: D.-J. Noh, D.-H. Lee, M.-H. Cho, H.-I. Kim, Y. H. Kwon, H.-J. Seol
Appeared or available online: June 19, 2009
A JMAK-like approach for isochronal Austenite-ferrite transformation kinetics in Fe-0.055 wt-%N alloy
Author: H. Chen, Y. C. Liu, D. J. Wang, Z. S. Yan, J. C. Fu, Q. Z. Shi
Appeared or available online: June 19, 2009
Investigation of boundary migration during grain growth in fully recrystallised high purity nickel
Author: Y. B. Zhang, A. Godfrey, W. Liu, Q. Liu
Appeared or available online: June 19, 2009
Deformation behaviour of electrodeposited nanocrystalline Ni with broad grain size distribution
Author: W. C. Xu, P. Q. Dai, X. L. Wu
Appeared or available online: June 19, 2009
Fabrication of TiC-Fe cermet coating by plasma spraying of Fe-Ti-C powder using sucrose as carbon source
Author: H. T. Wang, S. Q. Zhang, J. H. Huang, J. L. Zhu, H. Zhang, X. K. Zhao
Appeared or available online: June 19, 2009
Nitriding of titanium and Ti6Al4V alloy in ammonia gas under low pressure
Author: B. Januszewicz, L. Klimek
Appeared or available online: June 19, 2009
Fabrication of low-cost Nd-Fe-B sintered magnets reusing ultrafine powders
Author: X. G. Cui, M. Yan, T. Y. Ma, W. Luo, S. J. Tu
Appeared or available online: June 19, 2009
Effect of nanoclay content on properties of glass-waterborne epoxy laminates at low clay loading
Author: L. Aktas, M. C. Altan
Appeared or available online: May 15, 2009
Interface microstructure analysis of SiO₂ glass ceramic and Ti-6Al-4V alloy joint brazed with Ti-Zr-Ni-Cu alloy
Author: H. B. Liu, L. X. Zhang, D. Liu, P. He, J. C. Feng
Appeared or available online: May 15, 2009
Microstructural investigation of Cu²⁺ doped nanohydroxyapatites
Author: Z. Evis
Appeared or available online: May 14, 2009
Effect of temperature and reactivity of molten 55Al-Zn alloy on Co based alloy coatings
Authors: A. Scheid, A. S. C. M. d'Oliveira
Appeared or available online: May 14, 2009
Microstructural evolution of equal channel angular pressed AZ91D magnesium alloy during partial remelting
Author: T. J. Chen, Y. Ma, Y. D. Li, G. X. Lu, Y. Hao
Appeared or available online: May 14, 2009
Synthesis optimisation and characterisation of multiwalled carbon nanotubes produced by spray pyrolysis of hexane
Author: Z. Sadeghian, A. M. Rashidi
Appeared or available online: May 14, 2009
Joining of SiC particle reinforced aluminium metal matrix composites by electromagnetic field aided brazing method
Author: Z. S. Yu, R. F. Li, K. Qi
Appeared or available online: May 14, 2009
Fatigue propagation of long cracks in ferritic thin wall ductile iron castings
Author: M. Caldera, M. Chapetti, J. M. Massone, J. A. Sikora
Appeared or available online: May 14, 2009
Effect of current density on distribution and roughness of nanocrystallites for duplex treatment
Author: M. Aliofkhazraei, A. S. Rouhaghdam
Appeared or available online: May 14, 2009
Investigation of thermal properties of Al-Si matrix reinforced fine SiC_p composites
Author: Y. Abdullah, A. R. Daud, M. Harun, R. Shamsudin
Appeared or available online: May 14, 2009
Explosion hardening of Hadfield steel crossing
Author: F. C. Zhang, B. Lv, T. S. Wang, C. L. Zheng, M. Zhang, H. H. Luo, H. Liu, A. Y. Xu
Appeared or available online: April 24, 2009
Microstructure and compressive properties of NiAl-Cr(Mo)-Dy near eutectic alloy prepared by suction casting
Author: L. Y. Sheng, J. T. Guo, L. Z. Zhou, H. Q. Ye
Appeared or available online: April 24, 2009
Evaluation of microstructures and wear properties of duplex boride coatings
Author: V. Samadi, A. Habibolahzade
Appeared or available online: April 24, 2009
Statistical analysis of tensile properties of cast A357/Al₂O₃ MMCs
Author: M. Emamy, A. Razaghian, S. Kaboli, J. Campbell
Appeared or available online: April 24, 2009
Evaluation of airliner cabin textile materials after vapour phase hydrogen peroxide decontamination
Author: S. F. Chou, W. F. Gale, H. S. Gale, C. G. Shannon, G. Buschle-Diller, N. I. Sofyan
Appeared or available online: April 24, 2009
Interfacial reaction mode and its influence on tensile strength in laser joining Al alloy to Ti alloy
Author: S. H. Chen, L. Q. Li, Y. B. Chen
Appeared or available online: April 24, 2009
Investigating influence of hybrid (yttria+copper) nanoparticulate reinforcements on microstructural development and tensile response of magnesium
Author: K. S. Tun, M. Gupta, T. S. Srivatsan
Appeared or available online: April 24, 2009
Theoretical study on behaviour of superplastic forming/diffusion bonding of bulk metallic glasses
Author: J. G. Lin, X. F. Wang, C. Wen
Appeared or available online: April 24, 2009
Influence of coating and alloy additions on distribution of fibres and hardness of cast aluminium base short steel fibre reinforced composites
Author: D. Mandal, B. K. Dutta, S. C. Panigrahi
Appeared or available online: April 24, 2009
Modelling dissolution of low melting point phases during the homogenisation of AA7020 aluminium alloy
Author: A. R. Eivani, H. Ahmed, J. Zhou, J. Duszczyk
Appeared or available online: April 24, 2009
Analysis of zonal shrinkage in alloy steels
Author: Z. Radovic, N. Jaukovic, M. Lalovic, N. Tadic
Appeared or available online: April 24, 2009
Deformation twinning in zircaloy 2
Author: S. K. Sahoo, V. D. Hiwarkar, I. Samajdar, P. Pant, G. K. Dey, D. Srivastav, R. Tewari, S. Banerjee
Appeared or available online: April 22, 2009
Billet quenching extrusion process as efficient and reliable replacement for conventional extrusion of Al-Cu alloys
Authors: R. Barbič, V. Dragojevič, A. Smolej
Appeared or available online: April 22, 2009
Predicting optimum hollowness of normally loaded cylindrical rollers using finite element analysis
Author: W. M. Abu-Jadayil, W. A. Khraisat
Appeared or available online: April 21, 2009
Investigation of developed precipitates in AlMgSiCu alloys with and without excess Si
Author: E. F. Abo Zeid, Y.-T. Kim
Appeared or available online: April 21, 2009
Interfacial reaction layer in resistance spot welded joint between aluminium alloy and austenitic stainless steel
Author: R. F. Qiu, C. Iwamoto, S. Satonaka
Appeared or available online: April 21, 2009
Study on static strain aging of 6082 aluminium alloy
Author: S. Dadbakhsh, A. Karimi Taheri
Appeared or available online: April 21, 2009
Effect of heat treatment on microstructure and transparent conducting properties of sol-gel ZnO/Al thin films
Author: J. L. Chen, D. Chen, Z. H. Chen
Appeared or available online: April 21, 2009
Grain boundary segregation in Ni-base (718 plus) superalloy
Author: R. Ding
Appeared or available online: April 21, 2009
Investigation of secondary phase effect on 2205 DSS fracture toughness
Author: I. Calliari, G. Straffelini, E. Ramous
Appeared or available online: April 21, 2009
Hot deformation behaviour of thixocast Al-Si-Mg alloy during compression at elevated temperatures
Author: M. Haghshenas, A. Zarei-Hanzaki, A. Sayed
Appeared or available online: April 21, 2009
Temperature cycling and the rate of the bainite transformation
Author: H. S. Hasan, M. Peet, H. K. D. H. Bhadeshia, S. Wood, E. Booth
Appeared or available online: April 21, 2009
Improving tensile and compressive strengths of magnesium by blending it with aluminium
Author: S. K. Thakur, M. Paramsothy, M. Gupta
Appeared or available online: April 21, 2009
Air cooled bainitic steels for strong, seamless pipes Part 1 - alloy design, kinetics and microstructure
Authors: G. Gomez, T. Pérez, H. K. D. H. Bhadeshia
Appeared or available online: April 21, 2009
Air cooled bainitic steels for strong, seamless pipes Part 2 - properties and microstructure of rolled material
Authors: G. Gomez, T. Pérez, H. K. D. H. Bhadeshia
Appeared or available online: April 21, 2009
Superplastic forming of Zr based metallic glass ribbons under equibiaxial tension
Author: L. D. Gong, K. C. Chan, L. Liu, G. Wang
Appeared or available online: April 21, 2009
Brazing of carbon fibre reinforced SiC composite and Ti alloy using Cu-Ti-C filler materials
Author: J. H. Xiong, J. H. Huang, Z. P. Wang, Y. H. Ban, H. Zhang, X. K. Zhao
Appeared or available online: April 21, 2009
Experimental study on effect of temperature on mechanical properties of graphite fibre reinforced Al matrix composites
Author: Y. H. Zhang, G. H. Wu
Appeared or available online: April 21, 2009
Wear performance and mechanical properties of 80 wt-%Al₂O₃/20 wt-%YSZ cutting inserts at different sintering rates and soaking times
Author: J. K. C. Hao, A. Z. A. Azhar, M. M. Ratnam, Z. A. Ahmad
Appeared or available online: April 21, 2009
Dissolution precipitation mechanism of TiC/Ti composite layer produced by laser cladding
Author: W. L. Wu
Appeared or available online: April 21, 2009
Phase transformations induced by mechanical alloying of Ag-28 at.-%Al alloy
Authors: R. Esquivel-Gonzalez, H. J. Dorantes-Rosales, V. M. López-Hirata, J. L. González-Velázquez, E. Contreras-Piedras, M. L. Saucedo-Muñoz, F. Hernández Santiago
Appeared or available online: April 21, 2009
Characterisations of electrospark deposition Stellite 6 alloy coating on 316L sealed valve used in nuclear power plant
Author: C. J. Chen, M. C. Wang, D. S. Wang, H. S. Liang, P. Feng
Appeared or available online: April 10, 2009
Microstructures and precipitation behaviour of cryomilled Al-Zn-Mg-Cu-Mn powders
Author: Y. H. Cai, H. Cui, J. S. Zhang
Appeared or available online: April 10, 2009
Effects of minor additions of Ce and Y on as cast microstructure of Mg-3Sn-2Ca magnesium alloy
Author: M. B. Yang, F. S. Pan, J. Shen, Y. L. Ma
Appeared or available online: April 10, 2009
On mechanism of fatigue fracture in interstitial free steel sheet
Author: S. Majumdar, D. Bhattacharjee, K. K. Ray
Appeared or available online: April 10, 2009
Recrystallisation processes in cold rolled low carbon steel strip containing different starting microstructures
Author: W. Xu, M. Ferry
Appeared or available online: April 10, 2009
Prediction of thermal stresses and temperature field in work rolls during hot strip rolling process
Author: A. Sonboli, S. Serajzadeh
Appeared or available online: April 10, 2009
Superplasticity of Al-Mg-Li alloy prepared by thermomechanical processing
Author: X. M. Zhang, L. Y. Ye, Y. W. Liu, J. G. Tang, D. W. Zheng
Appeared or available online: April 10, 2009
Low temperature deposition of ultrathin molybdenum carbide films and microstructural characterisation
Author: C. C. Tripathi, M. Kumar, D. Kumar, D. K. Avasthi, K. G. M. Nair
Appeared or available online: April 10, 2009
Influence of carbides on the strength and toughness of a niobium alloy
Author: R. Ding, I. P. Jones
Appeared or available online: March 13, 2009
Isothermal embrittlement of Fe-8Mn alloys at 450°C
Author: F. Nikbakht, M. Nasim, C. Davies, E. A. Wilson, H. Adrian
Appeared or available online: March 13, 2009
EBSD study of solidification characteristics of austenitic stainless steel weld pool
Author: Y. M. Huang, Y. M. Wu, C. X. Pan
Appeared or available online: March 13, 2009
The different effects of asymmetric rolling and surface friction on formation of shear texture in aluminium alloy AA5754
Author: H. Jin, D. J. Lloyd
Appeared or available online: March 13, 2009
Austempering study of unalloyed and alloyed ductile irons
Author: L. Sidjanin, D. Rajnovic, O. Eric, R. E. Smallman
Appeared or available online: March 13, 2009
Formalisation of Wilshire-Scharning methodology to creep life prediction with application to 1Cr-1Mo-0.25V rotor steel
Author: M. Evans
Appeared or available online: March 12, 2009
Study of precipitation in 2101 duplex stainless steel
Author: W. Zhang, L. Z. Jiang, J. Q. Gao, H. M. Song, J. C. Hu
Appeared or available online: March 12, 2009
Preparation and optical properties of GaN nanocrystalline powders
Author: L. Jia, E. Q. Xie, X. J. Pan, Z. X. Zhang, Y. Z. Zhang
Appeared or available online: March 12, 2009
Vacuum brazing of NiTi alloy by AgCu eutectic filler
Author: X. K. Zhao, J. W. Tang, L. Lan, J. H. Haung, H. Zhang, Y. Wang
Appeared or available online: March 3, 2009
Transient liquid phase bonding of 6061-15 wt-%SiCp in argon environment using Cu powder interlayer
Author: J. Maity, T. K. Pal, R. Maiti
Appeared or available online: March 3, 2009
Interfacial reaction and mechanical reliability of eutectic Sn-0.7Cu/immersion Ag-plated Cu solder joint
Author: J.-W. Yoon, S.-B. Jung
Appeared or available online: February 23, 2009
Development of laminated composite materials based on orthorhombic aluminide/titanium alloy and their tensile mechanical properties
Author: R. M. Galeyev, O. R. Valiakhmetov, R. V. Safiullin, V. M. Imayev, R. M. Imayev, H.-J. Fecht
Appeared or available online: February 23, 2009
Microstructure and high temperature tensile properties of wide gap brazed cobalt based superalloy X-40
Author: T. Henhoeffer, X. Huang, S. Yand, P. Au, D. Nagy
Appeared or available online: February 23, 2009
Ultrasonic brazing of aluminium matrix composites assisted by operation of melting and squeezing
Author: W. W. Zhao, J. C. Yan, Q. J. Fu
Appeared or available online: February 16, 2009
Microstructures formed from mixed solders on copper substrate
Author: L. Snugovsky, P. Snugovsky, D. D. Perovic, S. Bagheri, J. W. Rutter
Appeared or available online: February 16, 2009
Effect of boron on removal of iron from aluminium melts
Author: J. W. Gao, D. Shu, J. Wang, B. D. Sun
Appeared or available online: February 16, 2009
Evolution of solidification microstructure of centrifugal cast Ti-6Al-4V alloy
Author: Y. W. Sui, B. S. Li, A. H. Liu, J. J. Guo, H. Z. Fu
Appeared or available online: February 16, 2009
Coefficients of thermal expansion of (Ni_0.5Al_0.5)_(1−x)Hf_x alloys (x=0…0.2)
Authors: P. J. Masset, D. Texier, M. Schütze
Appeared or available online: December 17, 2008
Diffusion reaction between Zircaloy-2 and Inconel 750X
Author: A. Laik, P. S. Gawde, G. B. Kale, K. Bhanumurthy
Appeared or available online: December 8, 2008
Microstructure characteristics of CBN/steel joints brazed with TiB₂ modified active filler
Author: W. F. Ding, J. H. Xu, Z. Z. Chen, C. Y. Yang, Y. C. Fu
Appeared or available online: December 2, 2008
Challenging gold based filler metals for uses in medicine
Authors: K. Bobzin, E. Lugscheider, F. Ernst, J. Rösing, S. Ferrara
Appeared or available online: November 9, 2008
Anisotropy of low temperature superplasticity of fine grained magnesium alloy AZ31 processed by multidirectional forging
Author: Z.-R. Zhang, J. Xing, X. Yang, H. Miura, T. Sakai
Appeared or available online: October 31, 2008
Formation of spherical nanocrystalline silicon carbide via carbothermal reduction of water glass and sugar
Author: S. L. Pan, J. J. Zhang, G. Z. Song
Appeared or available online: October 31, 2008
Microstructure evolution and mechanical properties of nickel based honeycomb sandwich
Author: Q. M. Zhang, X. D. He
Appeared or available online: October 20, 2008

Key:

- Free Content

- New Content

- Subscribed Content

- Free Trial Content

Share this item with others: These icons link to social bookmarking sites where readers can share and discover new web pages.