Materials Science and Technology

Characterisation and quantification of microstructural banding in dual phase steels Part 1 - General 2D study
pp. 895-902(8)
Authors: McGarrity, K S; Sietsma, J; Jongbloed, G

Characterisation and quantification of microstructural banding in dual-phase steels Part 2 - case study extending to 3D
pp. 903-910(8)
Authors: McGarrity, K S; Sietsma, J; Jongbloed, G

Modelling and simulation of A segregates in steel castings using thermal criterion function Part II - Optimisation of real industrial cast part
pp. 911-917(7)
Authors: Kotas, P; Hattel, J H

Mechanism of misorientation development within coalesced martensite
pp. 918-923(6)
Authors: Pak, J H; Bhadeshia, H K D H; Karlsson, L

Effect of solute Mg on grain size of aluminium alloys
pp. 924-927(4)
Author: Birol, Y

High speed rolling of Mg-3Al-1Zn alloy: texture and microstructure analysis
pp. 928-933(6)
Authors: Sanjari, M; Farzadfar, S A; Utsunomiya, H; Sakai, T; Essadiqi, E; Yue, S

Modelling dissolution of precipitates considering overlapping of solute fields
pp. 934-940(7)
Authors: Zuo, Q; Liu, F; Guo, Y L; Jiang, Y H

Grain refinement of solidified Mg-Al alloys by limited angular oscillation
pp. 941-947(7)
Authors: Guo, H-M; Sheng, Y-Y; Liu, D-D; Xie, W; Ge, Z-P; Yang, X-J

Influence of quenching rate and composition on optimal annealing temperature of Nd-Fe-B based nanocrystalline hard magnetic alloys
pp. 948-952(5)
Authors: Huyen, N T T; Yen, N H; Thanh, P T; Huu, D T; Thuy, D M; Thuy, N M; Dan, N H

Effect of Si content in hot dipping aluminium bath on Al-Fe bonding layer of aluminium piston with reinforced cast iron ring
pp. 953-958(6)
Authors: Li, C A; Xiong, J; Sun, L; Liao, Z; Peng, M C

Carburising behaviour of low carbon steel with nanocrystalline surface layer induced by ball milling
pp. 959-964(6)
Authors: Forghani, F; Dolatmoradi, A; Kahrobaee, S; Khaki, J Vahdati; Haddad-Sabzevar, M

Statistical characterisation of inclusions in metals: from 2D to 3D
pp. 965-970(6)
Authors: Cetin, A; Naess, A

Effect of short duration tempering on the microstructure and mechanical properties of a continuously annealed dual phase steel
pp. 971-979(9)
Authors: Mukherjee, M; Chintha, A R; Raj, A; Pathak, P; Haldar, A

Prediction of cutting forces and surface roughness using artificial neural network (ANN) and support vector regression (SVR) in turning 4140 steel
pp. 980-986(7)
Authors: Asilturk, İ; Kahramanli, H; Mounayri, H El

Improved soft magnetic properties and thermal stability for Fe_82·65Cu_1·35Si₂B₁₄ alloys with Nb, Zr, Ta or Co addition
pp. 987-990(4)
Authors: Liu, Z W; Li, Y M; Wang, J; Zhong, X C; Yu, H Y; Zeng, D C

High cycle rotating bending fatigue property in high strength casting steel with carbide free bainite
pp. 991-993(3)
Authors: Carmo, D J; Dias, J F; Santos, D B

Microstructural characteristics of directionally solidified Ni-43Ti-7Al alloys
pp. 994-999(6)
Authors: Zhou, L; Zheng, L J; Zhang, H R; Zhang, H

Structure and properties of TiO₂ coatings on biomedical NiTi alloy by microarc oxidation
pp. 1000-1005(6)
Authors: Wang, H R; Liu, F; Song, Y; Wang, F P

Multiscale modelling approach for predicting solidification structure evolution in vacuum arc remelted superalloy ingots
pp. 1006-1013(8)
Author: Nastac, L

Studying flow effects on dendrite fragmentation using Rayleigh-Bénard convection
pp. 1014-1017(4)
Author: Aveson, J W

Healing behaviour of creep induced cavities during hot isostatic pressing of nickel based superalloy
pp. 1018-1021(4)
Authors: Zhou, Y; Zhang, Z; Zhao, Z H; Zhong, Q P