Materials Science and Technology

EDITORIAL
pp. 717-718(2)

Analytical characterisation of oxide dispersion strengthened steels for fusion reactors
pp. 719-723(5)
Authors: de Castro, V; Lozano-Perez, S; Marquis, E A; Auger, M A; Leguey, T; Pareja, R

Effects of friction stir welding and post-weld annealing on nanostructured ferritic alloy
pp. 724-728(5)
Authors: Etienne, A; Cunningham, N J; Wu, Y; Odette, G R

Role of alloying elements in nanostructured ferritic steels
pp. 729-734(6)
Authors: Miller, M K; Parish, C M

Atom probe analysis of clusters and precipitates in severely deformed and annealed interstitial free steel
pp. 735-738(4)
Authors: Pereloma, E V; Hazra, S S; Zhu, C; Ringer, S P; Gazder, A A

Three-dimensional atomic scale analysis of microstructures formed in high strength steels
pp. 739-741(3)
Authors: Timokhina, I B; Xiong, X Y; Beladi, H; Mukherjee, S; Hodgson, P D

Precipitation of nanosized nitrides in plasma nitrided Fe-M (M = Al, Cr, Ti, V) alloys
pp. 742-746(5)
Authors: Miyamoto, G; Tomio, Y; Aota, H; Oh-ishi, K; Hono, K; Furuhara, T

Effect of electron irradiation on structure of carbon nanotubes
pp. 747-754(8)
Authors: Xu, Z W; Min, C Y; Chen, L; Wang, Y K; Guo, Q W; Wu, N

Structural evaluation of Al-4Mn-5Al₂O₃ (wt-%) nanocomposite produced by mechanical-thermal synthesis and powder technology methods
pp. 755-760(6)
Authors: Razavi Tousi, S S; Yazdani Rad, R; Manafi, S A

Comparative study on effects of microstructures of hot rolled and twin roll casting 1235 aluminium alloy on surface quality of aluminium foils produced
pp. 761-766(6)
Authors: Zhu, Y Z; Huang, R Y; Zhu, Z; Xiang, Z D

An experimental and modelling study of brittle cleavage crack propagation in transformable ferritic steel
pp. 767-773(7)
Authors: Hughes, G M; Smith, G E; Crocker, A G; Flewitt, P E J

Effect of δ-ferrite, lead and sulphur on hot workability of austenitic stainless steels with solidification structure
pp. 774-782(9)
Authors: Tehovnik, F; Vodopivec, F; Celin, R; Arzenšek, B; Gontarev, J

Oxidation induced void formation in TEM specimens of Al-Cu-Li alloy
pp. 783-788(6)
Authors: Nakahara, S; Tanner, D A; Khan, A K; Robinson, J S

Grain structure and texture in aluminium alloy AA5083 after equal angular channel extrusion, warm rolling and subsequent annealing
pp. 789-792(4)
Authors: Jin, H; Gallerneault, M; Segal, V M; Young, P J; Lloyd, D J

Characterisation of anomalies embedded in graphite fibre reinforced aluminium composite by chirplet parameters
pp. 793-799(7)
Authors: Su, J; Wu, G H; Gou, H S; Chen, G Q; Jiang, L T; Li, Y

Sound absorption of open celled aluminium foam fabricated by investment casting method
pp. 800-804(5)
Authors: Wang, X F; Wei, X; Han, F S; Wang, X L

Microstructure characterisation of solution treated (ST) and solution treated and aged (STA) Incoloy 909
pp. 805-810(6)
Authors: Balachander, M A; Vishwakarma, K; Tang, B; Richards, N L

Comparison of single crystal Ni based superalloy repair by gas tungsten arc and electron beam processes
pp. 811-817(7)
Authors: Churchman, C; Bonifaz, E A; Richards, N L

Effect of melt superheat on structure of unsteady state unidirectionally solidified duplex stainless steel
pp. 818-822(5)
Authors: Li, Z J; Chen, X R; Ao, L; Zhong, H G; Zhang, W Z; Zhai, Q J

Improving high temperature properties of alumina based ceramic cores containing yttria by vacuum impregnating
pp. 823-828(6)
Authors: Wu, H H; Li, D C; Tang, Y P; Chen, X J; Xu, D Y; Sun, B

Strain aging behaviour of cold rolled multiphase steel
pp. 829-833(5)
Authors: Murari, F D; Füzessy de Melo, T M; Gonzalez, B M

Effects of antimony addition and section size on formation of chunky graphite in ductile iron
pp. 834-838(5)
Authors: Diao, X G; Ning, Z L; Cao, F Y; Ren, S Z; Sun, J F

Development of Ni-TiC and Ni- (Ti,W)C composite powders for high velocity oxy-fuel (HVOF) coating and characterisation of coatings
pp. 839-844(6)
Authors: Karbasi, M; Saidi, A; Zamanzad Ghavidel, M R