Materials Science and Technology

Different grain morphologies in grain-refined 7075 billet
pp. 1175-1182(8)
Authors: Eskin, D.G.; Ruvalcaba, D.; Kwakernaak, C.; Katgerman, L.

Optimal holding temperatures and phosphorus additions for primary silicon refinement in Al-high Si alloys
pp. 1183-1188(6)
Authors: Dai, H.S.; Liu, X.F.

In situ scanning electron microscopy observation of fracture crack propagation in the welding interface between aluminium alloy and steel
pp. 1189-1192(4)
Authors: Qiu, R.; Iwamoto, C.; Satonaka, S.

Effect of annealing on forming limit diagram and crystallographic textures of aluminium 5086 grades annealed at four different temperatures
pp. 1193-1206(14)
Authors: Narayanasamy, R.; Ravi Chandran, M.; Vanitha, C.; Sathiya Narayanan, C.

Effects of low frequency electromagnetic field on solidification of 7050 aluminium alloy during hot top casting
pp. 1207-1210(4)
Authors: Wang, X.J.; Zhao, Z.H.; Zuo, Y.B.; Zhu, Q.F.; Qu, F.; Cui, J.Z.

Microstructural chracterisation of Al-Si-xTi cast alloys
pp. 1211-1214(4)
Authors: Zeren, M.; Karakulak, E.

Identification of shear bands in wrought magnesium alloy friction stir welds and laser beam welds
pp. 1215-1221(7)
Authors: Commin, L.; Rotinat, R.; Pierron, F.; Masse, J.E.; Barrallier, L.

Microstructure and mechanical properties of ZM6 magnesium alloy produced by extrusion of machined chips
pp. 1222-1226(5)
Authors: Wen, L.H.; Ji, Z.S.; Xin, M.D.

Bulk metallic glass formation in the Mg-Cu-Y system
pp. 1227-1233(7)
Authors: Katz-Demyanetz, A.; Rosenson, H.; Koren, Z.; Regev, M.

Effect of beam interaction time on laser alloying with pulsed Nd-YAG laser
pp. 1234-1237(4)
Authors: Vaziri, A.; Shahverdi, H.R.; Shabestari, S.G.; Torkamany, M.J.

Non-equilibrium grain boundary co-segregation of nickel and tin in 2·6 NiCrMoV steel
pp. 1238-1242(5)
Authors: Wang, M.Q.; Wang, K.; Deng, Q.

Understanding the effect of aluminium on microstructure in low level nitrogen steels
pp. 1243-1248(6)
Authors: Palizdar, Y.; Scott, A.J.; Cochrane, R.C.; Brydson, R.

Inconsistent wear behaviour of cryotreated tool steels: role of mode and mechanism
pp. 1249-1257(9)
Authors: Das, D.; Dutta, A.K.; Ray, K.K.

Integrating copper at the nanometer length scale with Sn-3·5Ag solder to develop high performance nanocomposites
pp. 1258-1264(7)
Authors: Babaghorbani, P.; Nai, S.M.L.; Gupta, M.

Practical method for producing galvanised dual-phase steels with superior strength - ductility combination
pp. 1265-1270(6)
Authors: Chang, L.; Chen, T.R.; Pan, Y.T.; Yang, K.C.

Influence of section size on dual phase ADI microstructure and properties: comparison with fully ferritic and fully ausferritic matrices
pp. 1271-1278(8)
Authors: Basso, A.; Martínez, R.; Sikora, J.

Synthesis and characterisation of Ni-doped Fe₃O₄/polypyrrole magnetic and conducting nanocomposites with core-shell structure
pp. 1279-1282(4)
Authors: Ma, J.; Ji, Y.; Shen, X.

Influence of deformation during T10 treatment on microstructure/hardness/electrical conductivity of Cu-Cr alloy produced in nonprotected atmosphere
pp. 1283-1288(6)
Authors: Hosseini, E.; Habibollahzadeh, A.; Erfanmanesh, M.; Mostajabodave, H.; Kazeminezhad, M.

Tensile properties of jute fibres
pp. 1289-1295(7)
Authors: Virk, A.S.; Hall, W.; Summerscales, J.

'Spalling' of SAC Pb free solders when used with nickel substrates
pp. 1296-1300(5)
Authors: Snugovsky, L.; Snugovsky, P.; Perovic, D.D.; Rutter, J.W.