Materials Science and Technology

Effect of deformation and Nb segregation on grain size bimodality in HSLA steel
pp. 939-946(8)
Authors: Chakrabarti, D.; Davis, C.L.; Strangwood, M.

Influence of beam polarisation in laser bending process
pp. 947-952(6)
Authors: Liu, J.; Sun, S.; Guan, Y.

First order reaction kinetics for transient creep in NiAl hardened austenitic steel
pp. 953-959(7)
Authors: Satyanarayana, D.V.V.; Malakondaiah, G.; Phaniraj, C.; Sarma, D.S.

Study of internal stress of amorphous Ni-W alloy films
pp. 960-968(9)
Authors: Liu, R.; Wang, H.; Li, X.-P.; Ding, G.-F.

Parametric and non-parametric modelling of earing and hardness of deep drawn cups
pp. 969-975(7)
Authors: Lela, B.; Duplančić, I.; Bajić, D.

Low stress welding technology without post-weld heat treatment
pp. 976-980(5)
Authors: Xu, J.J.; Chen, L.G.; Ni, C.Z.

Modification of coupled model of microstructure evolution and flow stress: experimental validation
pp. 981-988(8)
Author: Svyetlichnyy, D.S.

Tension deformation mechanism and fracture characteristics of high nitrogen steel 6Cr21Mn10MoVNbN at 25-800°C
pp. 989-994(6)
Authors: Zhu, Y.Z.; Zhu, Z.; Yin, Z.M.; Xiang, Z.D.

New numerical method for the fit of Garofalo equation and its application for predicting hot workability of a (V-N) microalloyed steel
pp. 995-1002(8)
Authors: Rieiro, I.; Carsí, M.; Ruano, O.A.

Room temperature hardness of carbide strengthened cast alloys in relation to their carbon content and aging temperature

Effect of composition on kinetics of athermal martensite formation in plain carbon steels
pp. 1009-1012(4)
Authors: van Bohemen, S. M. C.; Sietsma, J.

Microstructure evolution in AISI 304 stainless steel during near rapid directional solidification
pp. 1013-1016(4)
Authors: Fu, J.W.; Yang, Y.S.; Guo, J.J.; Ma, J.C.; Tong, W.H.

Dry sliding wear behaviour of hypoeutectic Al-Si alloys containing excess iron
pp. 1017-1022(6)
Authors: Taghiabadi, R.; Ghasemi, H.M.

Impact of post-deposition annealing on surface, bulk and interface properties of RF sputtered AlN films
pp. 1023-1027(5)
Authors: Kar, J.P.; Mukherjee, S.; Bose, G.; Tuli, S.; Myoung, J.M.

Poly(ethylene terephalate) prepolymer graft modification of nano-TiO₂ and its effect on mechanical property of polycarbonate nanocomposites
pp. 1028-1034(7)
Authors: Li, L.; Shi, L.-Y.; Zhang, Y.; Cao, S.-M.; Feng, X.

Effect of ZnO coating of whiskers on thermal expansion properties of aluminium borate whisker reinforced aluminium composites
pp. 1035-1038(4)
Authors: Yue, H.Y.; Wang, L.D.; Fei, W.D.

Study of fractional softening of AZ31 magnesium alloy under multistage hot deformation
pp. 1039-1045(7)
Authors: Shamsi, M.; Sanjari, M.; Hanzaki, A. Zarei

Joining of C_f/SiC composite to Ti alloy using composite filler materials
pp. 1046-1050(5)
Authors: Xiong, J.; Huang, J.; Wang, Z.; Lin, G.; Zhang, H.; Zhao, X.

RETRACTED: Surface oxidation of carbon fibre on tribological properties of PEEK composites
pp. 1051-1056(6)
Authors: Li, J.; Sheng, X.H.

Effect of temperature on mechanical characteristics of copper-chromium composite
pp. 1057-1061(5)
Authors: Bukhanovsky, V.V.; Rudnitsky, N.P.; Mamuzich, I.

Fabrication of transparent Nd:YAG ceramics by vacuum sintering with CaF₂ and tetraethoxysilane additives
pp. 1062-1064(3)
Authors: Meng, Q.X.; Liang, B.Y.; Li, H.Y.; Su, C.H.; Jin, S.Z.