Materials Science and Technology

Using differential scanning calorimetry as an analytical tool for ultrafine grained metals processed by severe plastic deformation
pp. 687-698(12)
Authors: Gao, N.; Starink, M.J.; Langdon, T.G.

Mechanism of reaction of molten NiTi with EBM graphite crucible
pp. 699-706(8)
Authors: Sadrnezhaad, S.K.; Ahmadi, E.; Malekzadeh, M.

Thermal contact at solder/substrate interfaces during solidification
pp. 707-710(4)
Authors: Nyamannavar, S.; Prabhu, K.N.

Comparative study of dynamic impact properties and microstructures of weldable and unweldable aluminium-scandium (Al-Sc) alloys
pp. 711-725(15)
Authors: Lee, W.-S.; Chen, T.-H.

Microstructure of tool steel after low temperature ion nitriding
pp. 726-732(7)
Authors: Zagonel, L.F.; Mittemeijer, E.J.; Alvarez, F.

Formation of nickel aluminide/nickel hybrid coatings on alloy steels by two step process of nickel plating and low temperature pack aluminisation
pp. 733-738(6)
Authors: Xiang, Z.D.; Datta, P.K.

Effect of pulse current on microstructure and mechanical properties of variable polarity arc weld bead of 2219-T6 aluminium alloy
pp. 739-742(4)
Authors: Qiu, L.; Yang, C.L.; Lin, S.B.; Fan, C.L.

Improvement of magnetic residual stress measurements based on Fourier transform
pp. 743-746(4)
Authors: Liu, H.S.; Yin, C.H.; Zhang, L.; Mao, X.B.; Miao, X.X.; Lu, A.H.

Effect of Sc addition on microstructure and mechanical properties of Al-Cu-Mg-Ag-Zr alloy
pp. 747-752(6)
Authors: Xiao, D.H.; Song, M.; Huang, B.Y.; Yi, J.H.; He, Y.H.; Li, Y.M.

Effect of solution impurities on morphology and composition of copper electrodeposits obtained in membrane based cell
pp. 753-759(7)
Authors: Cifuentes, L.; Grágeda, M.; Casas, J.M.; Vargas, T.

Cyclic stress-strain characteristics of two microalloyed steels
pp. 760-769(10)
Authors: Gupta, C.; Nagchaudhury, J.; Chakravartty, J.K.; Prasad, R.C.

Effects of magnesium on surface quality of AA6061 extrusions
pp. 770-776(7)
Authors: Teixeira, J.S.; Wood, J.T.

Numerical simulation of bubble size distribution of aluminium foams in liquid state
pp. 777-783(7)
Authors: Li, K.; Xie, M.Z.; Liu, H.

Ductility, structural quality, and fracture toughness of Al-Cu-Mg-Ag (A201) alloy castings
pp. 784-789(6)
Authors: Tiryakioğlu, M.; Campbell, J.

Synthesis and thermal stability of novel amorphous Al₇₀Fe₂₅Zr₅ alloy prepared by mechanical alloying
pp. 790-793(4)
Authors: Zou, X.G.; Zou, Y.

Structural investigation of nanohydroxyapatite doped with Y³⁺ and F^- ions
pp. 794-798(5)
Authors: Basar, B.; Evis, Z.

Effects of Mg doping on sol-gel derived nanocrystalline hydroxyapatite thin films
pp. 799-804(6)
Authors: Köseoğlu, N.C.; Büyükaksoy, A.; Aslan, M.H.; Oral, A.Y.

Dynamic Young's modulus and glass transition temperature of selected tropical wood species
pp. 805-808(4)
Authors: Hamdan, S.; Sedik, Y.; Jusoh, I.; Hasan, M.; Talib, Z.A.

Investigation on reactive sintering process of boron carbide ceramics by XRD
pp. 809-812(4)
Authors: Wang, C.B.; Zhang, S.; Shen, Q.; Zhang, L.M.