Materials Science and Technology

Microstructure and strength modelling of Al-Cu-Mg alloys during non-isothermal treatments: Part 1 - Controlled heating and cooling
pp. 1403-1410(8)
Authors: Khan, I.N.; Starink, M.J.

Microstructure and strength modelling of Al-Cu-Mg alloys during non-isothermal treatments: Part 2 - Welds
pp. 1411-1418(8)
Authors: Khan, I.N.; Starink, M.J.; Sinclair, I.; Wang, S.C.

TTP diagrams for 7055 aluminium alloy
pp. 1419-1421(3)
Authors: Liu, S.D.; Zhang, X.M.; You, J.H.; Huang, Z.B.; Zhou, Z.P.

Study on microstructures and grain boundary penetration behaviours in contact reactive brazing joints of 6063 Al alloy
pp. 1422-1426(5)
Authors: Wu, M.F.; Yu, C.; Pu, J.

Prediction of solidification behaviour of weld pool through modelling of heat transfer and fluid flow during gas tungsten arc welding of commercial pure aluminium
pp. 1427-1432(6)
Authors: Farzadi, A.; Serajzadeh, S.; Kokabi, A.H.

Experimental analysis of corrosion resistance on columnar to equiaxed transition region of as cast structures of Al-Cu alloys
pp. 1433-1437(5)
Authors: Osório, W.R.; Spinelli, J.E.; Freire, C.M.; Garcia, A.

Mg²⁺ content control of aragonite whisker synthesised from calcium hydroxide and carbon dioxide in presence of magnesium chloride
pp. 1438-1443(6)
Authors: Hu, Z.S.; Shao, M.H.; Li, H.Y.; Cai, Q.; Ding, S.G.; Wei, X.P.; Deng, Y.L.

Modelling and simulation of equiaxed dendritic structures permeability for Pb-Sn alloys
pp. 1444-1451(8)
Authors: Mirbagheri, S.M.H.; Khajeh, E.

Initial shear strain development during formation of nanostructured metal chips
pp. 1452-1461(10)
Authors: Jackson, M.J.; Whitfield, M.D.; Morrell, J.S.; Ahmed, W.; Davim, J.P.

Calibration of residual stress measurements obtained from EDM hole drilling method using physical material properties
pp. 1462-1469(8)
Authors: Lee, H.T.; Liu, C.

Effect of ultrafine grain structure on strain hardening of C-Mn steel warm rolled and subjected to intercritical annealing
pp. 1470-1476(7)
Authors: Santos, D.B.; Neves, E.G.; Gonzalez, B.M.

Examination of chemical reaction for revealing plastic deformation zone in low carbon steel
pp. 1477-1483(7)
Authors: Okayasu, M.; Sato, A.; Mizuno, M.

Production of injection moulded 316L stainless steels reinforced with TiC(N) particles
pp. 1484-1491(8)
Authors: Gülsoy, H..

Transient liquid phase bonding of Gamma Met PX: microstructure and mechanical properties
pp. 1492-1500(9)
Authors: Butts, D.A.; Gale, W.F.

Development of porous 316L stainless steel with controllable microcellular features using selective laser melting
pp. 1501-1505(5)
Authors: Shen, Y.F.; Gu, D.D.; Wu, P.

Relationship between failure behaviour and weld fusion zone attributes of austenitic stainless steel resistance spot welds
pp. 1506-1512(7)
Authors: Marashi, P.; Pouranvari, M.; Sanaee, S.M.H.; Abedi, A.; Abootalebi, S.H.; Goodarzi, M.