Materials Science and Technology

Focus on martensitic transformations
pp. 883-883(1)
Authors: Withers, Philip J.; Mori, Tsutomu

Crystallography and morphology of twins in equiatomic TiPt martensite
pp. 884-889(6)
Authors: Nishida, M.; Matsuda, M.; Yasumoto, Y.; Yano, S.; Yamabe-Mitarai, Y.; Hara, T.

Giant magnetic field induced strain in ferromagnetic shape memory alloys and its condition
pp. 890-895(6)
Authors: Fukuda, T.; Kakeshita, T.

Ductile Cu-Al-Mn based shape memory alloys: general properties and applications
pp. 896-901(6)
Authors: Sutou, Y.; Omori, T.; Kainuma, R.; Ishida, K.

Comparison using neutron diffraction of martensitic transformation in Fe-Mn-Si shape memory alloys with and without VN precipitates
pp. 902-907(6)
Authors: Oliver, E.C.; Mori, T.; Daymond, M.R.; Withers, P.J.

Innovation in producing crane rail fishplate using Fe-Mn-Si-Cr based shape memory alloy
pp. 908-912(5)
Authors: Maruyama, T.; Kurita, T.; Kozaki, S.; Andou, K.; Farjami, S.; Kubo, H.

Relaxation mechanisms in martensitic NiTi(Cu): internal friction measurements correlated to in situ TEM straining
pp. 913-919(7)
Authors: Parlinska-Wojtan, M.; Schäublin, R.; Gotthardt, R.

TEM investigation of intermediate phase transformation and micromodulation in Ni-Mn-Ga ferromagnetic shape memory alloys
pp. 920-926(7)
Authors: Tsuchiya, K.; Todaka, Y.; Umemoto, M.

Domain switching in rhombohedral PZT ceramics under electrical and mechanical loading
pp. 927-933(7)
Authors: Hall, D.A.; Mori, T.; Withers, P.J.; Kungl, H.; Hoffmann, M.J.; Wright, J.

Size effects on martensitic phase transformations in nanocrystalline NiTi shape memory alloys
pp. 934-940(7)
Authors: Waitz, T.; Antretter, T.; Fischer, F.D.; Karnthaler, H.P.

Effect of cooling rate on solidification microstructures in AISI 304 stainless steel
pp. 941-944(4)
Authors: Fu, J.W.; Yang, Y.S.; Guo, J.J.; Tong, W.H.

Effect of microstructure on drop weight tear properties and inverse fracture occurring in hammer impacted region of high toughness X70 pipeline steels
pp. 945-956(12)
Authors: Hwang, B.; Shin, S.Y.; Lee, S.; Kim, N.J.; Ahn, S.S.

Effect of microstructure and chemical composition on dynamic factor of high strength steels
pp. 957-963(7)
Authors: Qu, J.; Dabboussi, W.; Nemes, J.; Yue, S.

Microstructure and mechanical properties of stainless steel under Nd:YAG pulsed laser irradiation
pp. 964-968(5)
Authors: Cui, C.Y.; Hu, J.D.; Liu, Y.H.; Guo, Z.X.

Plastic strain due to twinning in austenitic TWIP steels
pp. 969-973(5)
Authors: Qin, B.; Bhadeshia, H.K.D.H.

Microstructure, composition analysis and formation mechanism of Pb-Sn multilayered film synthesised by thin layer electrochemical deposition
pp. 974-980(7)
Authors: Jia, S.F.; Tu, Y.F.; Wei, R.B.; Huang, S.Y.; Sang, J.P.; Zou, X.W.

Mechanical strength and fracture toughness of high chromium white cast irons
pp. 981-985(5)
Authors: Pariente, I.F.; Belzunce, F.J.; Riba, C.R.y.J.

Processing of nanocrystalline copper by mechanochemical reduction of CuO and Cu₂O with graphite
pp. 986-990(5)
Authors: Sheibani, S.; Ataie, A.; Heshmati-Manesh, S.; Khayati, G.R.

Wrought magnesium alloys for structural applications
pp. 991-996(6)
Authors: Letzig, D.; Swiostek, J.; Bohlen, J.; Beaven, P.A.; Kainer, K.U.

Graded Ni-YSZ anode coatings for solid oxide fuel cell prepared by EB-PVD
pp. 997-1001(5)
Authors: Meng, B.; Sun, Y.; He, X.D.; Li, M.W.

Influence of ZnO homobuffer layer on n-ZnO/p-Si photodiode
pp. 1002-1004(3)
Authors: Qi, H.X.; Li, Q.S.; Zhao, B.; Zheng, M.M.; Li, X.S.; Zhang, N.

Stress transfer along reinforced fibres of C_f/Al composite during compaction
pp. 1005-1008(4)
Authors: Murali, S.; Chandrasekaran, M.